You are on page 1of 13

KOLEJ VOKASIONAL SEBERAMG PERAI

RANCANGAN SESI LATIHAN SEMESTER 4 TAHUN 2017

Jabatan TEKNOLOGI KEJURUTERAAN ELEKTRIK & ELEKTRONIK

Nama Kursus TEKNOLOGI ELEKTRIK

Kod dan Tajuk Modul ETE 4025 POWER ELECTRONIC CIRCUIT AND DEVICE
Tarikh/Jangka masa
14 MINGGU Jam Pertemuan: 7 JAM / MINGGU
pelaksanaan

Course Outcomes:

At the end of the course, students should be able to:-

1. Identify the various types of power electronic semiconductor devices with the appropriate symbols and their structures.
2. Explain the basic principle operation of power electronics converters using the appropriate circuit diagrams and suitable power electronics devices.
3. Determine the output voltage waveforms of the power electronics converters base on the circuit operation.
4. Solve calculations on output voltage from the waveform produced using the given formula.
5. Demonstrate team working efficiently while doing practical work.
MINGGU KOMPETENSI KAEDAH PENGAJARAN KAEDAH PENTAKSIRAN BAHAN / SUMBER

INTRODUCTION TO POWER 1.1.1 Draw the symbol and structure of the SCR
ELECTRONIC DEVICES according to standard symbol.

1.1 Study the characteristic of 1.1.2 Identify the terminals of the SCR according to
Silicon Controlled Rectifiers manual. BUKU TEKS
(SCR). KUIZ KEJURUTERAAN
1.1.3 Explain the regenerative action using two- UJIAN
transistor model. AMALI LAMAN SESAWANG
1/2
1.1.4 Graph the V-I characteristic curve of the SCR. NOTA IPT
(12.6.2017)
1.1.5 Describe the V-I characteristic curve of the
HINGGA SCR.

(23 .6.2014) 1.1.6 Explain the turn-on and turn-off characteristic


of the SCR.

1.2 Study the characteristic of 1.2.1 Draw the symbol and structure of the GTO
Gate-Turn-Off (GTO). according to standard.

1.2.2 Identify the terminals of the GTO according to KUIZ BUKU TEKS
manual. UJIAN KEJURUTERAAN

1.2.3 Graph the V-I characteristic curve of the GTO. LAMAN SESAWANG

1.2.4 Describe the V-I characteristic curve of the NOTA IPT


GTO.

1.2.5 Explain the turn-on and turn-off characteristic


of the GTO.

1.3 Study the characteristic of 1.3.1 Draw the symbol and structure of the TRIAC.
TRIAC.
1.3.2 Identify the terminals of the TRIAC. KUIZ BUKU TEKS
UJIAN KEJURUTERAAN
1.3.3 Graph the V-I characteristic curve of the AMALI
TRIAC. LAMAN SESAWANG
1.3.4 Describe the V-I characteristic curve of the NOTA IPT
TRIAC.

1.3.5 Explain the turn-on and turn-off characteristic


of the TRIAC.

MINGGU KOMPETENSI KAEDAH PENGAJARAN KAEDAH PENTAKSIRAN BAHAN / SUMBER

INTRODUCTION TO POWER 1.4.1 Draw the symbols for NPN and PNP of the
ELECTRONIC DEVICES BJT.
KUIZ BUKU TEKS
1.4 Study the characteristic of 1.4.2 Identify the terminals for NPN and PNP of the UJIAN KEJURUTERAAN
Bipolar Junction Transistor BJT. AMALI
(BJT). LAMAN SESAWANG
1.4.3 Graph the V-I characteristic curve of the BJT.
NOTA IPT
3/4 1.4.4 Describe the V-I characteristic curve of the
BJT.

1.4.5 Explain the turn-on and turn-off characteristic


(3.7.2017) of the BJT.

HINGGA
1.5 Study the characteristic for 1.5.1 Draw the symbols for P-channel and N-
enhancement-type of Metal channel of the MOSFET.
(14.7.2017) Oxide
1.5.2 Identify the terminals for P-channel and N- BUKU TEKS
channel of the MOSFET. KUIZ KEJURUTERAAN
UJIAN
1.5.3 Graph the V-I characteristic curve of the AMALI LAMAN SESAWANG
MOSFET.
NOTA IPT
1.5.4 Describe the V-I characteristic curve of the
MOSFET.

1.5.5 Explain the turn-on and turn-off characteristic


of the MOSFET.
1.6 Study the characteristic of 1.6.1 Draw the symbol of the IGBT.
Insulated Gate Bipolar
Transistor (IGBT). 1.6.2 Identify the terminals of the IGBT. KUIZ BUKU TEKS
UJIAN KEJURUTERAAN
1.6.3 Graph the V-I characteristic curve of the IGBT. AMALI
LAMAN SESAWANG
1.6.4 Describe the V-I characteristic curve of the
IGBT. NOTA IPT

1.6.5 Explain the turn-on and turn-off characteristic


of the IGBT.

1.7 Study other types of 1.7.1 Draw the symbols of the Diac, Zener Diode,
semiconductor devices. Photo Diode, Photo Thyristor, Photo
Transistor, Optocoupler, Programmable Uni- BUKU TEKS
junction Transistor (PUT) and Operational KUIZ KEJURUTERAAN
Amplifier (Op-Amp). UJIAN
AMALI LAMAN SESAWANG
1.7.2 Identify the terminals of Diac, Zener Diode,
Photo Diode, Photo Thyristor, Photo NOTA IPT
Transistor, Optocoupler, Programmable Uni-
junction Transistor (PUT) and Operational
Amplifier (Op-Amp).
IDENTIFY AC TO DC 2.1.1 State the function of single-phase AC to DC
CONVERTER (RECTIFIERS) converter.

2.1 Understand the operation of 2.1.2 List the type of single-phase AC to DC


single- phase AC to DC converters.
converter. a. Uncontrolled and Controlled half wave
rectifiers. BUKU TEKS
b. Uncontrolled and Controlled full wave UJIAN KEJURUTERAAN
rectifiers (Center-tapped Transformer). ASIGNMENT
c. Uncontrolled and Controlled full wave AMALI LAMAN SESAWANG
rectifiers (Bridge).
NOTA IPT
2.1.3 Explain the operation of single-phase AC to
DC converters with resistive and inductive
load.
5 a. Uncontrolled and Controlled half wave
rectifiers.
b. Uncontrolled and Controlled full wave
rectifiers (Center-tapped Transformer).
c. Uncontrolled and Controlled full wave
(17.7.2017) rectifiers (Bridge).
2.1.4 Calculate the output voltage of the AC to DC
HINGGA converters with resistive and inductive load.
a. Uncontrolled and Controlled half wave
(21.7.2017) rectifiers.
b. Uncontrolled and Controlled full wave
rectifiers (Center-tapped Transformer).
c. Uncontrolled and Controlled full wave
rectifiers (Bridge).

2.1.5 Determine the effects of inductive load to the


operation of a single-phase AC to DC
converter.

2.1.6 Identify the method used to overcome the


effects appeared due to existence of
inductance in loads.

2.1.7 Use AC to DC converter in switched-mode UJIAN


power supply (SMPS). ASIGNMENT
2.1.8 Explain the operation of an uncontrolled and AMALI
controlled three-phase half wave rectifier with
resistive and inductive load.
2.1.9 Explain the operation of an uncontrolled and
controlled three-phase full wave rectifier with
resistive and inductive load.

2.1.10 Sketch the waveforms of the output currents


and voltages developed in the circuit.

2.1.10.1 Determine the formula of the output voltage for


three-phase AC to DC converter.

2.1.11 Determine the advantages and disadvantages


of the three-phase over single phase AC to DC
converter
MINGGU KOMPETENSI KAEDAH PENGAJARAN KAEDAH PENTAKSIRAN BAHAN / SUMBER

2.2Understand the principle 2.1.12 Explain the operation of an uncontrolled and


operation of three-phase controlled three-phase half wave rectifier with
AC to DC converter resistive and inductive load.
UJIAN BUKU TEKS
2.1.13 Explain the operation of an uncontrolled and ASIGNMENT KEJURUTERAAN
controlled three-phase full wave rectifier with AMALI
resistive and inductive load. LAMAN SESAWANG

2.1.14 Sketch the waveforms of the output currents NOTA IPT


and voltages developed in the circuit.

2.1.15 Determine the formula of the output voltage for


three-phase AC to DC converter.

2.1.16 Determine the advantages and disadvantages


of the three-phase over single phase AC to DC
converter.
IDENTIFY DC TO DC 3.1.1 State the function of DC to DC Converter.
CONVERTER (DC CHOPPERS)
3.1.2 Determine the application of DC to DC
3.1 Understand the principle Converter in industry.
operation of DC to DC UJIAN BUKU TEKS
Converter. 3.1.3 State the function of the step-down converter ASIGNMENT KEJURUTERAAN
(buck converter). AMALI
LAMAN SESAWANG
3.1.4 Construct the circuit of the step-down
converter. NOTA IPT
6
3.1.5 Explain the principle of step-down operation
with resistive load.
(24.7.2017)
3.1.6 State the function of the step-up converter
HINGGA (boost converter)

(28.7.2017)
IDENTIFY DC TO DC 3.1.7 Construct the circuit of the step-up converter.
CONVERTER (DC CHOPPERS)
3.1.8 Explain the principle of step-up operation with
3.1Understand the principle resistive load.
operation of DC to DC
Converter 3.1.9 Sketch the waveforms of the output currents
and voltages developed in the circuits in step-
down converter and step-up converter.
7
3.1.10 Produce the expression of the output voltage,
output current, duty cycle, peak-to-peak ripple UJIAN
(31.7.2017) current, maximum and minimum ripple ASIGNMENT BUKU TEKS
inductor current and peak-to-peak ripple AMALI KEJURUTERAAN
HINGGA voltage of capacitor for continuous current PRESENTATION
mode of a DC to DC converter in step-down LAMAN SESAWANG
(04.8.2017) converter and step-up converter.
NOTA IPT
3.1.11 Calculate the output voltage, output current,
duty cycle, peak-to-peak ripple current,
maximum and minimum ripple inductor current
and peak-to-peak ripple voltage of capacitor
for continuous current mode of a DC to DC
converter in step-down converter and step-up
converter.
3.1.12 Compare the step-down to the step-up
converter.
MINGGU KOMPETENSI KAEDAH PENGAJARAN KAEDAH PENTAKSIRAN BAHAN / SUMBER

4.1.1 State the function of DC to AC converter.


IDENTIFY DC TO AC
CONVERTER (INVERTERS) 4.1.2 Determine the application of DC to AC
converter in industry. UJIAN BUKU TEKS
8 4.1 Understand the principle ASIGNMENT KEJURUTERAAN
operation of DC to AC 4.1.3 State the switching devices used in DC to AC AMALI
converter. converter such as BJT, MOSFET, IGBT, GTO. PRESENTATION LAMAN SESAWANG
(7.8.2017)
4.1.4 State two types of DC to AC converters: NOTA IPT
HINGGA a. Voltage Source Inverter (VSI).
b. Current Source Inverter (CSI).
(11.8.2017)
4.1.5 State two basic concepts of switching scheme
in VSI:
a. Pulse Width Modulation (PWM).
b. Square wave.
MINGGU KOMPETENSI KAEDAH PENGAJARAN KAEDAH PENTAKSIRAN BAHAN / SUMBER

IDENTIFY DC TO AC 4.1.6 Explain the principle operation of the


9 CONVERTER (INVERTERS) followings single-phase DC to AC converters
with the aid of relevant circuit by square wave
(14.8.2017) Understand the principle operation switching scheme:
of DC to AC converter a. Single-phase half bridge inverter with UJIAN BUKU TEKS
HINGGA resistive and inductive load. ASIGNMENT KEJURUTERAAN
b. Single-phase full bridge inverter with AMALI
(18.8.2017) resistive and inductive load. PRESENTATION LAMAN SESAWANG
4.1.7 Produce the expression of the output voltage
for DC to AC converters in single-phase half NOTA IPT
bridge inverter with resistive and inductive load
and single-phase full bridge inverter with
resistive and inductive load.
4.1.8 Sketch the waveforms in single-phase half
bridge inverter with resistive and inductive load
and single- phase full bridge inverter with
resistive and inductive load.
4.1.9 Determine the value of output voltage for DC
to AC converters in single-phase half bridge
inverter with resistive and inductive load and
single-phase full bridge inverter with resistive
and inductive load.
MINGGU KOMPETENSI KAEDAH PENGAJARAN KAEDAH PENTAKSIRAN BAHAN / SUMBER

IDENTIFY AC TO AC 5.1.1 Determine the function of AC voltage


CONVERTER (AC VOLTAGE controllers.
10 CONTROLLERS)
5.1.2 Explain the principle of on-off control operation UJIAN BUKU TEKS
5.1 Understand the principle with the aid of relevant circuit. ASIGNMENT KEJURUTERAAN
(21.8.2017) operation of AC Voltage AMALI
Controllers. 5.1.3 Explain the principle of phase control PRESENTATION LAMAN SESAWANG
HINGGA operation of the
following AC controllers with the aid of relevant NOTA IPT
(25.7.2017) circuit:
a. Single-phase bidirectional controllers with
resistive and inductive load.
b. Three-phase full-wave controllers with Y
connected resistive load using 60 and
120 conduction.

5.1.4 Sketch the input voltage, thyristor current,


gating pulse and output voltage waveforms
and input voltage, conduction angles of
thyristor and output phase voltages.
MINGGU KOMPETENSI KAEDAH PENGAJARAN KAEDAH PENTAKSIRAN BAHAN / SUMBER

IDENTIFY AC TO AC 5.1.5 Produce the expression of the output voltage


11/12 CONVERTER (AC VOLTAGE and output current for AC controllers.
CONTROLLERS)
5.1.6 Calculate the output voltage and output
(29.9.2017) 5.1 Understand the principle current for AC controllers. UJIAN BUKU TEKS
operation of AC Voltage ASIGNMENT KEJURUTERAAN
HINGGA Controllers. 5.1.7 Determine the applications of AC voltage AMALI
controllers. PRESENTATION LAMAN SESAWANG
(10.10.2017)
NOTA IPT

MINGGU KOMPETENSI KAEDAH PENGAJARAN KAEDAH PENTAKSIRAN BAHAN / SUMBER

IDENTIFY AC TO AC
CONVERTER (AC VOLTAGE 5.2.1 Determine the function of cyclo converters.
13/14 CONTROLLERS)
5.2.2 Explain the operation of the following cyclo BUKU TEKS
(13.10.2017) 5.2 Understand the principle converters with the aid of relevant circuit: UJIAN KEJURUTERAAN
operation of Cyclo converters. a. Single-phase cyclo converters with ASIGNMENT
HINGGA resistive load. AMALI LAMAN SESAWANG
b. Three-phase cyclo converters with PRESENTATION
(24.10.2017) resistive load. NOTA IPT

5.2.3 Sketch the output voltage and gating signals


waveforms.
Determine the applications of cyclo
converters
15 PP

16 PP

17 PP

You might also like