Professional Documents
Culture Documents
Specification
No. Button Instructions
Video and take pictures to confirm button, the camera mode, short press this key to start recording press
1 OK
again stop recording; camera mode Short Press to take pictures;
2 MODE Short Press to switch between each other in the camera / camera / playback;
4 Power Long press to turn device on/off. Short press to turn on/off the night vision led lights
Standby or short video process click here the key to digital narrow regulation; Down regulate the function
5 UP key menu options;
Standby mode press this button to call out the FUNCTION menu; continuously press this key to switch
6 Menu
among each other in the setup menu; under the video state short press this key to quick switch video audio
Standby or short video process click here button can digital zoom adjust; Down to select the function key
7 Down
menu options;
8 TF Card Slot TF Memory Card Slot
USB data interface, (1) for connecting a PC to transfer data; (2) for connecting an external power supply
9 USB
to charge the battery or supplies power to operate;
10 HDMI HOMI-OUT
Installation
1, Insert a memory card: Insert the memory card correctly in accordance with the notch on the memory card device prompted directions, press the card
until a click is heard, the insert into place.
Since the video recorder stores the card high speed, high-speed memory card must pay attention to the card (CLASS6 above).
Note: Please use a new card for the first time with this unit to
format the card match.
2, Remove the memory card: Press the memory card out of the slot.
Note: The device in the boot state, do not remove or insert a memory card to avoid damaging the memory card.
Note: When wiring the car charger can extend along the line the windscreen top trim panel hidden
installation, as shown above.
5, On / Off
1), Auto On / Off: car engine once launched, the device automatically. After the device is turned on, the camera automatically starts
Once the car stalled, the device will automatically save the recording and power off within 15 seconds.
2), Manual on / off: manual on, then press the host key ,press the key again power off.
Initial Settings
Date
1, Since the machine has switched the automatic imaging function, you need to press the OK button click, the device enters the standby state.
Than press twice, by press key or to set up date/time, press ok to enter.
3, Press or to adjust the number, and press OK to enter another screen. Button to adjust date and then press the OK button to enter another
field. Until the completion date of the setting, and then press the exit.
Operation
1, When the car engine starts, the device is automatically turned on and started recording. When the engine is off, it will automatically stop recording. Or
press the OK button.
Note: for some cars, car charger interface for constant power supply, when the engine flameout, will continue to power. If you
encounter such a situation, please take the following steps: with manually open shut / closed equipment, or car charger from
automobile cigar lighter pull.
2, Other types of camera: press the OK button, then start recording; press the OK button again, then stop the camera.
Note: (1)the camera will save every 1,3,5 minutes, once, please refer to the circular camera menu.
(2) this device will save memory card in the camera, if the memory card capacity is full, the file is stored in the card the
first will be overwritten.
(3)According to the gravity sensor or emergency camera, video can not be overwritten, need to manually delete.
3, Emergency camera
Recorder camera operation
1, short press M button, switch to the camera mode, the upper left corner of the screen shows the camera icon.
2, short press OK key to take pictures, the screen flashes a time when taking a picture, the picture is complete.
Video / photo playback operation
1, As in the state of the camera, you need to press the OK key to stop the camera.
2, Short press M button to switch to playback mode, the upper left corner of the screen display playback
3, Short press or You can choose the file up or down.
4, short press OK key player to play the selected video file; again short press to pause playback.
Menu set operation
1, if you are shooting, you need to press the OK button to stop the camera.
2, short press set the menu page.
3, by short press or , You can cycle up and down options in each set.
4, select the settings that you need to change, and enter the change by pressing the OK key.
5, After the short press of exit into standby mode.
4, short press OK key player to play the selected video file; again short press to pause playback.
Menu set operation
1, if you are shooting, you need to press the OK button to stop the camera.
2, short press set the menu page.
3, by short press or , You can cycle up and down options in each set.
4, select the settings that you need to change, and enter the change by pressing the OK key.
5, After the short press of exit into standby mode.
Note: if a collision is initiated, the device will automatically lock the current record video and will not be covered.
Special function:
1, gravity induction function
When the acceleration of gravity is started, the machine will automatically save the video when the accident can not be deleted files.
Gravity induction can be adjusted in the menu high - middle - low, the factory default.
2, File lock function
Press , the machine will save the current video as a file can not be deleted.
3, parking guard function
(1) open parking guard. When the vehicle flame out, tachograph into automatic shutdown procedures, body if it receives external force generated by
vibration, vehicle traveling data recorder will open the camera, recording 10-15 seconds after the automatic shutdown; when the detected again body
vibration and start all over again camera function.
(2) the video for the 1080P 30 frame / sec, and automatically add the lock to the file.
Note: Parking guard function must be in the driving recorder automatic shutdown of the case only to play a role, manual power
on or off, parking guard does not play a role.
Note: This equipment to follow the car driving state for a long time to work, the built-in battery only to save the shutdown and save the file
design, solid battery work time is limited, please connect the car power supply in daily use.
7, RESET reset
If in the process of use, the machine appears abnormal or crash situation, through the small needle through the hole of the shell to touch the RESET
button on the machine system reset operation.
Trouble shooting:
For problems in normal operating situation ,please try these methods below:
Unclear video
Checks if there are any dirt or fingerprint; and use lens paper to clear the camera len.
Crash
Restart by pressing shortly on RESET button after crash
Declare
Vehicle traveling data recorder for the vehicle on the way to the image and sound and other related information recording equipment, an
accident and so on as an auxiliary reference for the user to avoid misunderstanding:
Special note: the machine must be in normal working condition to record the file.
In the video, unplug the TF card, can lead to the end of a video file damaged or lost.
Video illegal power outages, will lead to the last image of a bad loss or loss.
Video recording damage or loss caused by the destruction of the machine during video recording.
The recording process is too large collisions, resulting in memory card is loose, it will damage the file or cause the file is missing.
Recording of the sound and video recording is only as a reference, I Division of the machine is not under normal circumstances, the bad files,
data loss caused by any loss caused by joint and several liability.
Hereby declare