ROBINSON _ MAINTENANCE MANUAL
R44 SERIES
1.330 Special Torques (continued)
These torques are non-standard and supersede those in Section 1.320.
BLADE (2) C722-3 screws, tip balance weight 55
GEARBOX filler plug 150
(1) NAS634-105 bolt, teeter hinge inch elongation, wet
Mana 'OS | and “i angatan
(4) bolts, intake manifold-to-sump (10-540) 80-100, torque, center
Notes:
of torques,
Values in inch-pounds unless otherwise specified,
Values include nut self-locking torque.
Increase values 10% if torqued at bolt head.
Wet indicates threads lubricated with A257-9 anti-seize.
For elbow and tee fittings which require alignment, torque to indicated value, then tighten to desired position.
Values + 10% unless range is specified
Unless otherwise specified, thread sizes 8-32 and smaller are not used for primary structure and do not require control
Page 1.26
JUN 2014