You are on page 1of 1

I reapir my xprog in this way.

I use UPA-USB Device Programmer v1.2 to repair my xprog

1. Earse Chip (Atmega64)


2. Lock Bytes all True Before Programming and fuse bytes like in photo fuse.jpg
3. Write Flash
4. Write Eeprom
5. After write flash and eeprom configurate Lock Bytes see photo lockbytes.jpg
8. Install NEW5.0.exe
9. Thats all, in this way i repair my xprog and no more Verify Error now 100% OK :)
Sorry for my bad English

You might also like