Professional Documents
Culture Documents
Security Information:
Siemens provides products and solutions with industrial security functions that support the secure
operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to
implement - and continuously maintain - a holistic, state-of-the-art industrial security concept.
Siemens' products and solutions only form one element of such a concept.
Customer is responsible to prevent unauthorized access to its plants, systems, machines and
networks. Systems, machines and components should only be connected to the enterprise network
or the internet if and to the extent necessary and with appropriate security measures (e.g. use of
firewalls and network segmentation) in place.
Additionally, Siemens' guidance on appropriate security measures should be taken into account.
For more information about industrial security, please visit
http://www.siemens.com/industrialsecurity
Siemens' products and solutions undergo continuous development to make them more secure.
Siemens strongly recommends to apply product updates as soon as available and to always use
the latest product versions. Use of product versions that are no longer supported, and failure to
apply latest updates may increase customer's exposure to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed
under
http://www.siemens.com/industrialsecurity
Contents
Installation notes
1 Contents of the Consignment
2 Hardware Requirements
3 Software Requirements
4 Installation
Usage (Release Notes)
1 Innovations and changes compared to earlier versions
1.1 What is new compared with Version 5.5 SP4?
Installation Notes
These installation notes contain important information that you need for the Hotfix installation.
Please read these notes before the installation.
2 Hardware Requirements
3 Software Requirements
4 Installation
Start the file "*.exe" of Hotfix 11 for STEP 7 V5.5 SP4. The files will then be copied to the PLC/PC
and entries will be made in MS Windows files. Operating instructions will be given to you during
setup. The drive onto which you install Hotfix 11 for STEP 7 V5.5 SP4 will be determined by the
installed STEP 7 version.
NCM
The export of WinCC tags from the OPC server for SNMP configurations has been
improved.
The configuration of ASi modules has been improved.
With operation on a PROFIBUS CP443-5, the behavior of DP/ASI-Link modules after
station recovery has been improved specifically for analog ASi slaves.
NetPro
If subprojects are not available during compilation of the configuration because they have
been swapped out for editing, messages resulting from this are no longer output as errors,
but rather only as warnings.
The configuration of H-CPUs in stand-alone operation has been improved.
The CiR capability has been improved particularly after executing the function "Download
the selected station".
The configuration of fault-tolerant S7 connections has been improved.
Migration of an OPC server V6.x to V8.1.1 has been improved.
It is now once again possible to apply non-specified connections from existing old projects.
As of this Hotfix: Unnecessary warnings during compilation have been removed, especially
for configurations with OPC and an unspecified language selection.
SIMATIC Manager
The performance when archiving multiprojects has been improved.
The "Save as > Rearrange before saving (slow)" function was improved for projects that do
not contain installed option packages.
With the use of SIMATIC Logon, the current user is only entered in the project
administration group if he or she is not already a member of a group that has administrator
rights in the project.
7-Zip can also be used for archiving or retrieving.
The comparison type "ONLINE/Offline" for the function "Block comparison" has been
improved with the option "including SDBs".
The comparison type "ONLINE/Offline" for the function "Block comparison" has been
improved for blocks with multi-instance blocks.
As of this Hotfix: The function Save As > With reorganization (slow) has been improved
for projects with PC stations.
As of this Hotfix: If users in a subproject are deleted and applied to the multiproject, they are
also deleted in the entire multiproject, including the other subprojects .
Print Function
The problem with the signature during printing, especially of CFC charts, has been
corrected.
Topology Editor
The display of the cable lengths in the online table view of the topology editor has been
improved.
Tool tip display for documentation lines has been improved.
Configuring Messages
New message numbers will always be assigned when copying blocks with message
capability or CFC charts.
As of this Hotfix: The use of references to a text library for messages has been improved.
Web Server
The network topology display in the Web server of the CPU has been improved.
CPU Messages
The display of messages by GSDM-based PROFINET devices has been improved.