Professional Documents
Culture Documents
Utility Fault Current 0 amperes kVA = 300 When you insert the kVA rating, power
factor and impedence you must select a
E = 0 voltage from the select the Voltage and
I = kVA x 1000 = trans. FLA trans. FLA = 0 Phase from dropdown box before the valu
will be calculated.)
0
Step 1a: Insert available
Isca = trans. FLA
fault x 100 ampere rating
current PF = 90%
Z local=utility
or
transformer from Z = 3% %
Isca = ampere short-circuit current RMS symmetrical. Isca = 3,000 amperes
Fault Current from Service disc. to panel "_____" Select Conductor & Raceway
Single Phase
Single Phase Feeder Length (distance) L =
2xLxI (ASC) Isca = 3,000 Phase 0
'f ' factor =
N x C x E L-N # conductors per phase N =
Continue by enteringPhase
next point
conductor constant C = 0 Phase Conductor
to point AWG
Volt Line to Line E L-L = 0 Volt
f = 0.000
Neutral conductor constant C = 0 Neutral Conductor AWG
Volt Line to Neutral EL-N = 0 Volt
Multiplier f = 0.000
M= 1 Line to Line M = 1.000
1+f Line to Neutral M = 1.000
2/0
AWG
Single Phase
Neutral
AWG
AWG
nductor & Raceway
Single Phase
Neutral
AWG
AWG
Project Name
Your Company Name