Professional Documents
Culture Documents
RESUMEN
En esta prctica se utilizaron los intercambiadores de calor de tubos concntricos, dicha unidad est
formada por un arreglo de tubos horizontales de acero inoxidable, los cuales se pueden conectar en serie o
en paralelo por medio de mangueras del mismo material. Luego se encendi el equipo y se abri la vlvula
ubicada cerca a la trampa de vapor, para extraer el condensado residual de la lnea de vapor, una vez sali
ste, se cerr nuevamente. Posteriormente, se abri la vlvula de entrada de vapor y se esper a que se
estabilizara el sistema. Se tomaron los datos de temperatura (0C) y presin (psi) tanto del agua como del
vapor. Por ltimo se midi el caudal del agua mediante el flujmetro y un cronmetro y el flujo del
condensado con la ayuda de un beaker y un cronmetro.
ABSTRACT
This practice was used the heat exchangers of concentric tubes, this unit is formed of a horizontal
arrangement of tubes of stainless steel, said tubes are connected in series or in parallel via hoses of the
same material. Later to turn on the equipment and opened the valve located near the steam trap, to remove
condensate from the steam line, one time leaked this, be closed again. Subsequently, opened the steam inlet
valve and waited for the system to stabilize. Data were captured temperature (C) and pressure (psi) both
water and steam. Finally, the water flow measured by the flowmeter and a timer and the flow of condensate
with the help of a beaker and a timer.
contracorriente
v = Flujo msico del vapor
condensado (Kg/s) Luego:
4 a
Re = (8) Para el vapor (hv):
Di
4v
Donde: Re =
(DoDi)
Di = Dimetro interno del tubo interior (11)
VII. BIBLIOGRAFA