Professional Documents
Culture Documents
Premier Coatings Ltd achieve a Queens Award for Enterprise: International Trade - See page 3
WINN & COALES (DENSO) LTD Tel: +44 (0) 20 8670 7511
Denso House, Chapel Road, London SE27 OTR, England Fax: +44 (0) 20 8761 2456
Anti-corrosion and sealing systems Email: mail@denso.net
Website: www.denso.net
Premier Coatings Ltd are proud to announce that they have been honoured with a
Queens Award for Enterprise: International Trade. The prestigious award has been
won for outstanding growth in overseas sales in the last three years.
Premier Coatings Ltd achieve a Queens Award for Enterprise: International Trade
Vol: 33 No. 4, Date: 05. 2017, Page: 3
4
London Gateway
BURIED PIPELINES & LPG VESSELS
laboratory and industrial information gathered on the temperature fluctuations aid in the leak
processes, and have developed detection processes.
a reputation for accuracy, Most RTD elements consist of a length of fine coiled wire wrapped
repeatability, and stability. This around a ceramic or glass core. The element is usually quite fragile, so it
Photo 2.
is often placed inside a sheathed
probe to protect it. The RTD
sensor is attached to the surface
of the pipe and will be buried
with the assembly. Corrosion
and environmental protection is
required to ensure the RTD
operates properly during its
service life. This required a
specialized coating system to
coat and protect these RTDs for
long term performance.
The coating scope of work
was that the entire block valve
and pipe spool assembly was
first abrasive blasted to a
SSPC-SP10 Near-White Metal
with a 2.5 to 5 mil profile. Denso
Protal 7250 Spray Epoxy was
then applied at 25-35 mils DFT
Photo 3. Photo 4.
over the entire below ground section of the block valve and pipe spool assembly.
The RTD sensor was then attached to the surface of the pipe. The entire area was then coated with a thin layer
for Denso Paste HT (Photo 1). Then the RTD is encapsulated with a layer of Densyl Mastic (Photo 2). This
would assure there were not any voids or cavities left around the RTD. Denso Hotline Tape was then applied
with a 55% overlap around the entire circumference of the pipe (Photo 3). This would ensure the long term
sealing of the area around the RTD.
The entire area was then wrapped with Denso Glass Outerwrap to give mechanical protection to the entire
assembly (Photo 4). The entire valve assemblies were then ready to be shipped to site for final installation
(Photo 5).
The End User that required these block valve and pipe spool assemblies appreciated the fact that Denso North
America was able to offer the entire solution for coating these RTDs.
Photo 5.
Project Summary
Product type:
Sub Sea Splash Zone Coating
Country: Australia
Object: Stainless steel shell
Problem: Sealing joints
Product SeaShield Slashzone
solution: UW Epoxy / Denso
311 Epoxy
Project Summary
Product type:
Lining for Concrete Floor
Country: South Africa
Object: Cellulose mill floor
Problem: Contaminated
Product Denso ST100
solution:
Winn & Coales International would like to bring your attention to their recently redesigned
SeaShield Marine Protection Systems website which can be found at www.seashield.com.
The new website features general enquiries, all of which are We invite you to take a look
a modern, streamlined design available in an easily navigable, at our exciting new website and
that showcases the solutions mobile optimised format. discover our excellent range of
available to customers, details SeaShield systems provide marine protection systems with
for each of the product systems protection to structures that are over 40 years proven track
available and real world case vulnerable to corrosion in marine record of durability and success.
studies highlighting SeaShields environments. Offering long-term
protective capabilities. corrosion prevention to jetty piles,
A comprehensive questionnaire offshore structures and sheet
allows enquirers to outline their piles, multiple grades of defense
own unique requirements in can be employed to achieve cost
order to receive tailored advice effective protection irrespective of
or make contact with more section structure design.
Densos widely used Densostrip sealant was recommended to Raymond Brown Construction by Merchant
Suppliers, Resapol of Southampton. Apart from its track record, the immediate availability of Densostrip in 20mm
x 25mm sections was also an advantage to the contractor. Densostrip is a compound rubber and bitumen joint
sealing strip for precast concrete units to provide a permanently flexible watertight seal when compressed
The new beach huts under construction - Densostrip is to join each pre-cast culvert section together. between joint faces previously
primed with Densostrip primer.
As well as water and sea water
it is resistant to chemical and
biological attack.
In addition to being an effective
seal for precast concrete box
culverts, other uses include
manholes, inspection chambers,
shafts, tunnels and pipe sections.
Project Summary
Product type:
Sealing Mastics
Country: United Kingdom
Object: Asphalt and concrete
Problem: Sealing joints
Product Densostrip
solution:
Protected with
Product type:
Industrial Linings
Archco Linings
Country: USA
Object: Oil Storage Tanks
Problem: Protective lining
A large US oil pipeline, storage and transportation company
Product Archco
had been experiencing numerous coating failures with their
solution: Industrial Linings
existing internal tank linings and was looking for a solution.
The internal tank floor and two
feet up the sidewall were blasted
to a near white finish (SSPC SP-
10). The Archco 400 primer,
which is a two part epoxy with
superior wet-out properties
suitable for sealing heavily pitted
floors, was easily sprayed with
a single leg (68:1) airless spray
unit. The following day the
Archco 476P was applied using
a plural component airless
spray unit.
This allowed for the tank to be
returned to service very quickly
(8 hours at 75F / 23C). The
Archco 476P applied over the Archco 400 primer to provide excellent chemical and high
Archco 476P is a 100% solids,
temperature resistances. two-part, high-temperature
The decision was made to Other key factors that played resistant, epoxy phenolic-novolac
switch to the Denso Archco into the decision to switch to system designed for internal
400 as a primer and Archco Denso were the companys tank linings.
476P as a topcoat, due to the success with several other The owners can expect a
excellent chemical and high Denso buried pipeline coatings service life of 20+ years with
temperature resistance that and the valuable technical the Denso Archco Tank & Pipe
these linings provide. service provided by Denso. Lining Systems.
Fully cured Archco 476P lining providing corrosion protection and allowing the tank to return to service Archco 400 primer being applied to the blasted
within 8 hours. floor and side walls of the tank.
Chemical and Heat Resistant Linings for Oil Storage Tanks - USA
Vol: 33 No. 4, Date: 05. 2017, Page: 13
14
50mm
3rd layer - Denso Acrylic Topcoat
50mm
Densyl Mastic
Denso Primer D
The National Grid LNG storage tank. Below: After surface preparation is complete, Denso primers must be applied followed by Densyl Mastic
to fill all the gaps between the tank and base prior to adding the tape layers.
To meet various operating
conditions at the Isle of Grain
National Grid site the Denso Tank
Base system was chosen to
give effective protection.
Following surface preparation,
Denso Hi-Tack Primer and
Denso Primer D were applied.
Densyl Mastic was then applied
in the gap between the tank and
the base. This not only provides a
sealant between the concrete and
tank base to prevent entrapment
of water but also a smooth profile
when applying the following Denso
Hi-Tack Tape. A single layer of
Denso Ultraseal RT Tape was
applied and then finally a topcoat.
Above: The Denso Hi-Tack Tape is applied. Above and below: After a single layer of Denso Ultraseal RT Tape is applied,
a coat of Denso Topcoat completes the Steelcoat system application.
q
bridges and support cables, and floors.
cranes and pipe bridges. Sealing and insulating
For further information - tick boxes, fill in coupon and fax or post to your nearest Denso branch
(full list of addresses on page 2).
Name: Title:
Company:
Address:
Phone: Fax:
FAX NUMBERS UK: +44 (0) 20 8761 2456 USA: +1 281 821 0304 CANADA: +1 416 291 0898
AUSTRALIA: +61 39387 6973 NEW ZEALAND: +64 9274 1258 SOUTH AFRICA: +27 31 569 4328