Professional Documents
Culture Documents
15962 15288
15455
VibChecker is an instrument for fast and easy measure- ful as a detailed analysis using expensive equipment and
ment of machine condition in preventive maintenance. elaborate techniques.
The instrument and the monitoring technique are based
VibChecker has a built in probe transducer. It is push but-
on the recommendations of ISO 2372 and ISO 10816
ton controlled and basic measurement data are entered
standards for broad band measurements of vibration.
manually. Evaluated measuring results are indicated by
These standards make the assumption that limited infor-
green-yellow-red LEDs and a real time FFT spectrum is
mation, obtained easily and at a low cost, is often as use-
produced for easy pattern recognition.
Technical specifications
Frequency range: 10 to 1000 Hz Input connector: mini coax, for external transducer
Readings: RMS / peak / peak-to-peak External transducers: vibration transducer TRM100 or
Measuring range: IEPE (ICP) type transducers with
Velocity 0.5 49.9 mm/s RMS voltage output
(0.02 2.0 in/s RMS) Output connector: 3.5 mm stereo mini plug for
calibration and software update
Acceleration 0.5 49.9 m/s (0.05 5.1 g)
2
SPM Instrument AB Box 504 SE-645 25 Strngns Sweden Technical data are subject to change without notice.
Tel +46 152 22500 Fax +46 152 15075 info@spminstrument.se www.spminstrument.com ISO 9001 certified. Copyright SPM 2013-11. TD-308 B