You are on page 1of 6

E200B, EL200B TRACK-TYPE EXCAVATORS 6KF00001-UP (MACHINE) POWER...

Page 1 of 6

Shutdown SIS

Previous Screen

Product: EXCAVATOR
Model: E200B EXCAVATOR 6KF
Configuration: E200B, EL200B TRACK-TYPE EXCAVATORS 6KF00001-UP (MACHINE) POWERED BY 3116 ENGINE

Testing and Adjusting


3114 , 3116 and 3126 Engines for Caterpillar Built Machines
Media Number -SENR3583-13 Publication Date -01/10/2008 Date Updated -31/10/2008

i01582952

Gear Group (Front) - Time


SMCS - 1206-531

Static Check Of The Timing Gear Position

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/f... 9/6/2017
E200B, EL200B TRACK-TYPE EXCAVATORS 6KF00001-UP (MACHINE) POWER... Page 2 of 6

Illustration 1 g00707095

Front gear group ( 3114 Engine)

(1) Camshaft gear

(2) Timing marks

(3) Camshaft idler gear

(4) Crankshaft gear

(5) Idler gear

(6) Oil pump gear

Illustration 2 g00707096

Front gear group ( 3116 and 3126 Engines)

(1) Camshaft gear

(2) Timing marks

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/f... 9/6/2017
E200B, EL200B TRACK-TYPE EXCAVATORS 6KF00001-UP (MACHINE) POWER... Page 3 of 6

(3) Camshaft idler gear

(4) Crankshaft gear

(5) Idler gear

(6) Oil pump gear

The basis for the correct fuel injection timing and the valve mechanism operation is determined by the
alignment of the timing for the front gear group. Align timing marks (2) on camshaft idler gear (3)
with the holes on camshaft gear (1) and crankshaft gear (4). This alignment is required in order to
provide the correct relationship between the piston movement and the valve movement.

Crankshaft Positions for Valve Lash Setting


Table 1
Valve Lash Setting For 3114, 3116, and 3126
Valves Dimension of Gauge
Inlet
0.38 0.08 mm (0.015 0.003 inch)
Exhaust
0.64 0.08 mm (0.025 0.003 inch)

Table 2
3114 Crankshaft Positions for Valve Lash Setting
The rotation of the crankshaft is viewed from the flywheel end.
Rotation Counterclockwise
Check and Adjust with No. 1 Piston On this Stroke. (1) Top Center Compression Stroke (2)
Injectors 3-4
Inlet Valves 1-2
Exhaust Valves 1-3
Check and Adjust with No. 1 Piston On this Stroke. Top Center Exhaust Stroke
Injectors 1-2
Inlet Valves 3-4
Exhaust Valves 2-4
Firing Order 1-3-4-2
(1)
Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston" for more information.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/f... 9/6/2017
E200B, EL200B TRACK-TYPE EXCAVATORS 6KF00001-UP (MACHINE) POWER... Page 4 of 6

(2)
Put No. 1 Piston at the top center position. After the top center position is found and the adjustments have been made
for the correct cylinders, remove the top center bolt. Turn the flywheel in a counterclockwise direction by 360
degrees. This puts No. 1 Piston at the top center position on the other stroke. Install the top center bolt in the flywheel
and complete the adjustments for the cylinders that remain.

Illustration 3 g00689649

Cylinder and Valve Location for the 3114 Engine

(A) Exhaust valves

(B) Inlet valves

Note: Check the crankshaft position with the No. 1 piston at the top center position. Refer to Testing
and Adjusting, "Finding Top Center Position for No. 1 Piston" for more information.

Note: Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust" for more information in
order to adjust the valves.

Table 3
3116 and 3126 Crankshaft Positions for Valve Lash Setting
The rotation of the crankshaft is viewed from the flywheel end.
Rotation Counterclockwise
Check and Adjust with No. 1 Piston On this Stroke. (1) Top Center Compression Stroke (2)
Injectors 3-5-6
Inlet Valves 1-2-4

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/f... 9/6/2017
E200B, EL200B TRACK-TYPE EXCAVATORS 6KF00001-UP (MACHINE) POWER... Page 5 of 6

Exhaust Valves 1-3-5


Check and Adjust with No. 1 Piston On this Stroke. Top Center Exhaust Stroke
Injectors 1-2-4
Inlet Valves 3-5-6
Exhaust Valves 2-4-6
Firing Order 1-5-3-6-2-4
(1)
Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston" for more information.
(2)
Put No. 1 Piston at the top center position. After the top center position is found and the adjustments have been made
for the correct cylinders, remove the top center bolt. Turn the flywheel in a counterclockwise direction by 360
degrees. This puts No. 1 Piston at the top center position on the other stroke. Install the top center bolt in the flywheel
and complete the adjustments for the cylinders that remain.

Illustration 4 g00581993

Cylinder and Valve Location for the 3116 and 3126 Engines

(A) Exhaust valves

(B) Inlet valves

Note: Check the crankshaft position with the No. 1 piston at the top center position. Refer to Testing
and Adjusting, "Finding Top Center Position for No. 1 Piston" for more information.

Note: Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust" for more information in
order to adjust the valves.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/f... 9/6/2017
E200B, EL200B TRACK-TYPE EXCAVATORS 6KF00001-UP (MACHINE) POWER... Page 6 of 6

Copyright 1993 - 2017 Caterpillar Inc. Wed Sep 6 07:49:45 UTC+0700 2017
All Rights Reserved.
Private Network For SIS Licensees.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/f... 9/6/2017

You might also like