Professional Documents
Culture Documents
Overview
This document describes how to configure D-Link DSR-500N to enable SSL VPN feature.
An SSL VPN is a form of VPN that can be used with a standard Web browser. SSL VPN doesnt
require the installation of specialized client software on end users computers, and is ideal
for applications including file sharing, remote backup and remote system management.
How to Configure SSL VPN Features in DSR Series 2
Situation note
In this scenario, all application servers of headquarter are located in 192.168.10.0/24 subnet. We
are going to configure DSR router which allows remote PCs to access application servers via this
SSL VPN tunnel. This tunnel doesnt handle local Internet traffic of PCs in order to reduce traffic
overhead for the tunnel.
Roaming User
DSR-1000N
Firmware version
Internet WAN LAN 1.03B12_WW
192.168.10.1
Configuration Step
1. Before SSL configuration, please enable remote management feature via
Tools -> Admin -> Remote Management.
2. Go to SETUP -> VPN Settings -> SSL VPN server -> Portal Layouts
How to Configure SSL VPN Features in DSR Series 4
The GUI page will look like above screenshot when you finish to add a portal layout.
3. Go to ADVANCED -> Users -> Domains, create a new Domain for SSL VPN users.
How to Configure SSL VPN Features in DSR Series 6
The GUI page will look like above screenshot when you finish to add a new domain.
How to Configure SSL VPN Features in DSR Series 7
4. Go to ADVANCED -> Users -> Users, add a new user account for SSL VPN connection belong to the test domain.
The GUI page will look like above screenshot when you finish to add a new user belong to test domain.
5. Go to SETUP -> VPN Settings -> SSL VPN Client -> SSL VPN Client, in this page, administrator is able to
configure what IP address range, DNS information will be dispensed to SSL VPN clients .
How to Configure SSL VPN Features in DSR Series 9
6. Go to SETUP -> VPN Settings -> SSL VPN Client -> Configured Client Routes to add a static route, since
we enabled the feature of Split Tunnel Support at previous step. Therefore, administrator is able to manually
alter the routing entries for each SSL user.
How to Configure SSL VPN Features in DSR Series 10
Following parameters are routing information of remote network for SSL VPN client.
Destination Network: 192.168.10.0
Subnet Mask: 255.255.255.0
How to Configure SSL VPN Features in DSR Series 11
7. Go to SETUP -> VPN Settings -> SSL VPN Server -> SSL VPN Policies, create a policy that allow the SSL VPN users
to access remote network.
Add a SSL VPN policy and follow below parameters on SSL VPN Policy Configuration Page.
Policy For: Global
Apply Policy to: All Addresses
Policy Name: Allow_all_address
Begin: 0
End: 65535
Service: All
Permission: Permit
How to Configure SSL VPN Features in DSR Series 12
When you click save settings, a SSL VPN policy has been created like following screenshot.
8. Now, you have finished all settings in DSR routers. When you successfully connect to DSR router via SSL VPN \
tunnel, You can check that there will be two default gateway in your client PC.