Professional Documents
Culture Documents
Version: V1.0
Note: Please read this Spefication carefully before using this machine and
properly keep it for further reference. Please read chapters hereof with
1/8
Chapter I Introduction of Product
1. Product introduction
geomagnetic vehicle detector modules AT-101P serial products based on loRa module as core.
LoRa integrates digital spread-spectrum, digital singal processing and forward error correction
technology has a high sensitivity of more than -148dBm. Additionally, high sensitivity and
+17dBm power amplifier integration make link budget of these devices reach anced level in
industry and become a best choice for long-distant transmission and application with extremely
high requirements for reliability. Maximium transmission distance of LoRa technology can be
AT Technology focuses on a study for new Internet of Things and data transmission technology
during recent years, by means of exclusive Airnode Protocol of AT Technology, fully fulfills
various different hardware devices and can meet demands of customers effectively.
2/8
2. Appearance introduction of product
3/8
3. Introduction of product functional features
4/8
Chapter II Technical parameters:
RAM:48KB
MCU FLASE:384KB
UART:channel 2, maximum 2Mbps communicate rate
SPI: channel 1, 20Mbps communicate rate
I2C:channel 2, maximum 400Kbps
Abundent peripheral interfaces, such as GPIO,
12bit-ADC, PWM, DAC
ardware
SX1276 868MHz,20dBm,100mW transimitting
power, sensitive receiving: -140dB, communication
LoRa wireless Built-in
rate: 300bps-5kbps, support FSK, GFSK, OOK and
communication antenna
LORA modulation method, 100m to 1.2km of
communication distance
Insert triaxial magnetoresistive sensor modules,
extremely low working current, configurable
Triaxial
detection sensivity; accuracy rate of vehicles magnetic
magnetoresistive
field induction detection can reach 98%; sensitivity of
sensor
magnetic induction can be set as high, middle and low
ranges.
Insert Hall sensor and be able to support startup &
Hall sensor
shutdown control for system
5/8
Built-in
LoRa antenna input port, 868MHZ antenna,
LORA
bandwidth 5MHZ, 2dBi
Output and antenna
input ports Insert buzzer' be able to be used for working state
reminder of system
Sensor input interface
i-COS system, good software system framwork,
MCU system
design of low power consumption
Software
Able to support LoRaWANand P2P transmission
LoRa
protocols
3.6V/8500mA, high-temperature resistant lithium
Lithium battery
sulfurous dedicated battery, type C battery
Power Average 10mA, maximum working current 100mA(LORA
source working currnet transmitting state)
6/8
2. Product networking application
7/8
8/8