Professional Documents
Culture Documents
5083 Aluminium Plate, ASTM B209 5083 Aluminium Plate traders in India,
Hindalco 5083 Aluminium Plate Dealers in Mumbai, Jindal 5083 Aluminium
Plate Dealers in India, Wholesaler of Aluminium Plate Grade 5083
5083 Aluminium Plate Suppliers in UAE, 5083 Aluminium Plate Supplier Singapore,
Dealer & Distributor of All 5083 Aluminium Alloy Plate Grades, Stockholder of 5083
Aluminium Plate 1mm
Aluminium 5083 Plate Temper O, H12, H14, H16, H18, H22, H24, H26, H32, H112
Aluminium 5083 Plate Coating Polyester, Fluorocarbon, polyurethane and epoxy coating
Polished, hair line, brush, sand blast, checkered, embossed, etching, etc.
Aluminium 5083 Plate Surface
Mill finish, Bright finish, paper interleaved, one side film, both sides film.
Bottom side Aluminium 5083 Plate is coated with protective polyester material, thickness more than 6 micron
We Export Aluminium 5083 Singapore, Indonesia, Ukraine, Korea, Thailand, Vietnam, Saudi Arabia, Brazil, Spain, Canada, USA, Egypt, Iran,
Plate to India, Kuwait, Dubai, Oman, Kuwait, Peru, Mexico, Iraq, Russia, Malaysia, etc.
Aluminum
Old New U.S.A Min. Max. Min. Max. Min. Max. Min.Max. Max Max. 99.0%
Min.
Chromium
(0.15-
0.35)Either
N8 54300 5083 0.1 4.0 4.9 0.4 0.7 0.5 1.0 0.4
Mn or Cr.
shall be
present.
5083 BS N8 Alloy 5083 AMS 4056 5083-0 QQ-A-200/4 5083 WS 3.3547 AlMg4.5Mn
A95083 Plate Plate QQ-A-250/6 5083 A-G4.5MC
Plate
AS/NZS 1734 Aluminium and aluminium alloys Flat sheet, coiled sheet and plate.
Temper 0.2% Proof Stress, MPa min Tensile Strength, MPa Elongation % min
For information only, proof stress is not specified or measured except by prior agreement
Minimum elongation, actual value depends on thickness thicker gauges have higher elongation
Equivalent Specifications
USA: AA 5083; UK: BS 5083; Germany: DIN AlMg4.5Mn; Europe: EN AW-A 5083; Japan: 5083; JIS
A5083P; France: NF A5083; ISO: Al Mg4.5Mn0.7.
The properties in this data sheet meet Australian/New Zealand Standard AS/NZS 1734:1997 Aluminium
and aluminium alloys Flat sheet, coiled sheet and plate (equivalent to BS EN 573-1).
Alloy 5083 can be supplied to meet other national standards.
Typical Mechanical Properties
Temper Tensile Strength Yield Strength Elongat
KSI KSI %
O (annealed) 42 21 14
H112 43 23 10
H116 46 33 10
H321 46 33 10
F As Fabricated
O Annealed
H Strain Hardened
W Solution Heat Treated
T Solution Heat Treated
T1 Cooled from an elevated temperature shaping process and naturally aged to a substantially
stable condition.
T2 Cooled from an elevated temperature shaping process, cold worked, and naturally aged to a
substantially stable condition.
T3 Solution heat treated, cold worked, and naturally aged to a substantially stable condition.
T4 Solution heat treated, and naturally aged to a substantially stable condition.
T5 Cooled from an elevated temperature shaping process then artificially aged.
T6 Solution heat treated then artificially aged.
T7 Solution heat treated then overaged/stabilized.
T8 Solution heat treated, cold worked, then artificially aged.
T9 Solution heat treated, artificially aged, then cold worked.
T10 Cooled from an elevated temperature shaping process, cold worked, then artificially aged.
Additional digits may be used after the first T temper digit to indicate subsequent stress relieving by
processes such as stretching, compressing, or a combination.