Professional Documents
Culture Documents
Introduction
Standard AC Motors
Constant Speed Motors
Induction
Motors
Electromagnetic
Reversible
Motors
Brake Motors
Brake Motors
magnetic
Electro-
Electromagnetic
Brake Motors
V Series
Clutch &
Motors
Brake
Synchronous Low-Speed
Motors Synchronous Dust-Resistant
Motors
Watertight,
Motors
Motors
Torque
Right-Angle
Gearheads
Heads
Linear
Brake Pack
Accessories
Page
A-109
Standard AC Motors
Ideal for Applications Required Load Holding Compatible with Gearheads or Linear Heads
This configuration is ideal for vertical applications in which the load Combination with a gearhead allows the motor to reduce to a
(1/30 HP)
25 W
40 W
RoHS-Compliant
The World K Series and BH Series conform to the RoHS Directive
that prohibits the use of six chemical substances including lead and
cadmium.
(1/12 HP)
60 W
World K Series Conforms to Safety Standards The Motor Bearing Life is Twice as Long as
All World K Series models have a built-in overheat a Conventional Type
protection device and conform to major safety standards. A motor's life is determined by its bearing. We adopted
(1/4 HP)
200 W
Introduction
Gearhead
Linear Heads: Convert Motor Rotation to Linear Motion
Combination with a linear head allows the motor to convert rotation Linear Head
to linear motion with great ease. Linear heads are available with a
Combine gearheads and linear heads with a pinion shaft type motor.
square sectioned rack. Gearheads and linear heads are sold separately.
Induction
Motors
BH Series comes with the gearhead pre-assembled.
RoHS-Compliant
Gearheads and linear heads conform to the RoHS Directive that
prohibits the use of six chemical substances including lead and
Reversible
cadmium.
Motors
Types of Gearheads and Linear Heads
Brake Motors
magnetic
Types Features
Electro-
Long Life, Low Noise Long Rated Life of 10000 Hours
GN-S Gearhead The GN-S gearhead achieves a long rated life of
10000 hours, twice the level of a conventional gearhead, by
V Series
adopting a large, specially designed bearing and reinforced
gears.
30
Low Noise Design : Long Life, Low Noise GN-S Gearhead
4IK25GN-AW2J/4GN120S
Clutch &
: GN-K Gearhead (Conventional Model)
The GN-S gearhead generates less noise thanks to gears
Motors
Sound Pressure Level [dB(A)]
Brake
25 4IK25GN-A/4GN120K
[Measurement conditions]
with a special shape and surface machining assembled with Load: 1.2 Nm
Direction: Clockwise
Measurement distance: 1 m
the use of advanced technology. 20 (Measured in A-weighted sound pressure level)
Applicable Products
Synchronous Low-Speed
15
Motors
6 W (1/125 HP), 15 W (1/50 HP), 25 W (1/30 HP) or 40 W 10
(1/19 HP) GN pinion motor
5
Synchronous Dust-Resistant
0
Motors
25.0 40 63 100 160 250 400 630 1K 1.6K 2.5K 4K 6.3K 10K 16K
31.5 50 80 125 200 315 500 800 1.25K 2K 3.15K 5K 8K 12.5K 20K
Frequency [Hz]
Watertight,
Motors
GE-S Gearhead The GE-S gearhead achieves a long rated life of 10000 60 W (1/12 HP) or 90 W (1/8 HP) GE pinion motor
hours, twice the level of a conventional gearhead, by
adopting a large, specially designed bearing and reinforced
gears.
Motors
Torque
The GE-S gearhead comes with a tapped hole at the tip of the shaft.
Right-Angle
Gearheads
Right-Angle Gearhead Ideal Space-Saving Solution Hollow Shaft and Solid Shaft Types are
Page A-239 The gear shaft is positioned at right angles with the motor Available
shaft, enabling space-saving. Select an appropriate type that suits your specific
Applicable Products
Heads
application. Linear
25 W (1/30 HP), 40 W (1/19 HP), 60 W (1/12 HP) or 90 W Solid shaft type of GE pinion gearhead comes with a tapped hole at
(1/8 HP) pinion motor the tip of the shaft.
Brake Pack
A-111
Standard AC Motors
Three-Phase 200/220/230
6W
Single-Phase 110/115
BH Series Single-Phase 220/230
Three-Phase 200/220/230
(1/50 HP)
15 W
GN Type 25 W, 40 W GN Type
World K Series 5000
Pinion Shaft (1/30 HP, 1/19 HP) Pinion Shaft
Hollow Shaft Gearhead
GE Type 60 W, 90 W GE Type
(1/4 HP)
200 W
Linear Heads
Applicable Motor
Type of Linear Head
Series Output Power Type of Pinion
6 W, 25 W GN Type
Square Sectioned Rack LS Linear Head World K Series
(1/125 HP, 1/30 HP) Pinion Shaft
Parallel Shaft Gearheads ( Page A-111) Right-Angle Gearheads ( Page A-239) Linear Heads ( Page A-259)
Introduction
Induction
Motors
Electromagnetic Brake Motors Peripheral Equipment
Reversible
(Sold separately)
Motors
Motor
(Pinion Shaft)
Brake Motors
magnetic
Electro-
Brake Pack
SB50W
AC Power Supply ( Page A-277)
(Main power supply)
V Series
Capacitor Cap
(Included)
Capacitor (Included)
Clutch &
Motors
Brake
Synchronous Low-Speed
Motors
Accessories (Sold separately)
Synchronous Dust-Resistant
Motors
Watertight,
Motors
Mounting Brackets Flexible Couplings CR Circuit for
( Page A-288) ( Page A-292) Surge Suppression
( Page A-302)
Motors
Torque
No. Product Name Overview Page
Right-Angle
Brake Pack Use this brake pack to stop the motor instantaneously, perform bi-directional operation, and more. A-277
Gearheads
Mounting Brackets Dedicated mounting bracket for the motor and gearhead. A-288
Flexible Couplings Clamp type coupling that connects the motor or gearhead shaft to the driven shaft. A-292
CR Circuit for Surge Suppression Used to protect relay and switch contacts (EPCR1201-2). A-302
Heads
Linear
Example of System Configuration
(Sold separately) (Sold separately)
Electromagnetic Brake Motor Long Life,
Mounting Bracket Flexible Coupling
Brake Pack
The system configuration shown above is an example. Other combinations are available.
Installation
A-113
Standard AC Motors
5 R K 40 GN - AW 2 M U
Motor Frame Size 2: 60 mm (2.36 in.) 3: 70 mm (2.76 in.) 4: 80 mm (3.15 in.) 5: 90 mm (3.54 in.)
(1/125 HP)
Series K: K Series
Output Power (W) (Example) 40: 40 W (1/19 HP)
Motor Shaft Type, Type of Pinion A: Round Shaft GN: GN Type Pinion Shaft GE: GE Type Pinion Shaft
(1/50 HP)
Power Supply Voltage AW: Single-Phase 110/115 VAC CW: Single-Phase 220/230 VAC SW: Three-Phase 200/220/230 VAC
15 W
2: RoHS-Compliant
M: Power Off Activated Type Electromagnetic Brake
Included Capacitor U: For Single-Phase 110/115 VAC E: For Single-Phase 220/230 VAC Blank: Three-Phase Type
(1/30 HP)
The U and E at the end of the model name indicate that the unit includes a capacitor. These letters are not listed on the motor nameplate.
25 W
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name. Page G-11
(Example) Model: 5RK40GN-AW2MU Motor nameplate and product approved under various safety standards: 5RK40GN-AW2M
Gearhead
(1/19 HP)
40 W
5 GN 50 SA
(1/12 HP)
60 W
Gearhead Frame Size 2: 60 mm (2.36 in.) 3: 70 mm (2.76 in.) 4: 80 mm (3.15 in.) 5: 90 mm (3.54 in.)
Type of Pinion GN: GN Type Pinion GE: GE Type Pinion
Gear Ratio (Example) 50: Gear Ratio of 50:1 10X denotes the decimal gearhead of gear ratio 10:1
(1/8 HP)
GN Type Pinion SA: Long Life, Low Noise GN-S Gearhead, RoHS-Compliant KA: GN-K Gearhead, RoHS-Compliant
90 W
BH Series
BH I 6 2 F M T - 100 RH
Series BH: BH Series
Motor Type I: Induction Motor
Motor Frame Size 6: 104 mm (4.09 in.)
Output Power (W) (Example) 2: 200 W (1/4 HP)
Power Supply Voltage F: Single-Phase 110/115 VAC E: Single-Phase 220/230 VAC S: Three-Phase 200/220/230 VAC
M: Power Off Activated Type Electromagnetic Brake
T: Terminal Box Type
Gear Ratio, Motor Shaft Type A: Round Shaft Type Number: Gear Ratio of Combination Type
Type of Gearhead RH: Right-Angle, Hollow Shaft Type RA: Right-Angle, Solid Shaft Type Blank: Parallel Shaft Type
(Combination type only)
Introduction
Temperature Rise
with connecting a gearhead or equivalent heat radiation plate. [Three-phase type: 70C (126F) or less]
Insulation Class Class B [130C (266F)]
6 W (1/125 HP) type has impedance protection.
Overheat Protection
All others have built-in thermal protector (automatic return type) Open: 1305C (2669F), Close: 8215C (179.627F)
Single-phase 110/115 VAC, Single-phase 220/230 VAC, Three-phase 220/230 VAC: 10+40C (+14+104F) (non-freezing)
Induction
Motors
Ambient Temperature
Three-phase 200 VAC: 10+50C (+14+122F) (non-freezing)
Ambient Humidity 85% or less (non-condensing)
6 W (1/125 HP), 15 W (1/50 HP), 25 W (1/30 HP), 40 W (1/19 HP) Type: IP20
Degree of Protection
60 W (1/12 HP), 90 W (1/8 HP) Type: IP40
Reversible
Motors
Heat radiation plate (Material: Aluminum)
Motor Type Size: mm (in.) Thickness: mm (in.)
6 W (1/125 HP) Type 115115 (4.534.53)
Brake Motors
15 W (1/50 HP) Type 125125 (4.924.92)
magnetic
Electro-
25 W (1/30 HP) Type 135135 (5.315.31) 5 (0.20)
40 W (1/19 HP) Type 165165 (6.506.50)
60 W (1/12 HP), 90 W (1/8 HP) Type 200200 (7.877.87)
V Series
BH Series
Item Specifications
Insulation Resistance 100 M or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity.
Clutch &
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and
Motors
Brake
Dielectric Strength
humidity.
Temperature rise of windings are 70C (126F) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity
Temperature Rise
with connecting a gearhead or equivalent heat radiation plate.
Synchronous Low-Speed
Insulation Class Class B [130C (266F)]
Motors
Overheat Protection Built-in thermal protector (automatic return type) Open: 1505C (3029F), Close: 9615C (204.827F)
Single-phase 110/115 VAC, Single-phase 220/230 VAC, Three-phase 220/230 VAC: 10+40C (+14+104F) (non-freezing)
Ambient Temperature
Three-phase 200 VAC: 10+50C (+14+122F) (non-freezing)
Synchronous Dust-Resistant
Ambient Humidity 85% or less (non-condensing)
Motors
Degree of Protection IP54 (excluding the installation surface of the round shaft type)
Heat radiation plate: 230230 mm (9.069.06 in.), Thickness: 5 mm (0.20 in.) (Material: Aluminum)
Watertight,
Motors
Motors
Torque
Right-Angle
Gearheads
Heads
Linear
Brake Pack
Accessories
Installation
A-115
Standard AC Motors
Specifications
6W
Motor
This type of motor does not contain a built-in friction brake mechanism.
(1/50 HP)
15 W
Output Starting
Model Rating Voltage Frequency Current Rated Torque Rated Speed Capacitor
Power Torque
Single-Phase 220
40 W
45 41
60 0.109 1450
30 6 6.3 5.8
2RK6GN-CW2ME 2RK6A-CW2ME 0.8
minutes 1/125 50 49
50 0.112 1200
7.1 6.9
(1/12 HP)
Single-Phase 230
45 41
60 W
60 0.113 1450
6.3 5.8
49 49
50 0.081 1200
6.9 6.9
Three-Phase 200
(1/8 HP)
6 41 41
90 W
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name. Page G-11
Details of safety standards Page G-2
Details of RoHS Directive Page G-38
: Impedance protected
Product Line
Motor
Model
Pinion Shaft Type Round Shaft Type
2RK6GN-AW2MU 2RK6A-AW2MU
2RK6GN-CW2ME 2RK6A-CW2ME
2IK6GN-SW2M 2IK6A-SW2M
Introduction
Gearhead, Mounting Screws, Operating Manual
Following gearheads are also available. For details, please refer to website
(http://www.orientalmotor.com/) or contact the nearest Oriental Motor sales office.
Induction
Gearhead Type Gearhead Model Gear Ratio
Motors
Parallel 2GNKA 3180
Shaft GN-K Gearhead 2GN10XK (Decimal Gearhead)
Enter the gear ratio in the box () within the model name.
Reversible
Motors
Gearmotor Torque Table
Gearheads and decimal gearheads are sold separately.
Brake Motors
magnetic
Enter the gear ratio in the box () within the gearhead model name.
Electro-
A colored background ( ) indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite
direction.
The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
V Series
The actual speed is 220% less than the displayed value, depending on the load.
To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio 10:1) between the gearhead and the motor.
In that case, the permissible torque is 3 Nm (26 lb-in).
Clutch &
Motors
50 Hz
Brake
Unit = Upper values: Nm/Lower values: lb-in
Speed
Model 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
r/min
Synchronous Low-Speed
Motor/
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Motors
Gearhead
2RK6GN-CW2ME 0.12 0.14 0.20 0.24 0.30 0.36 0.50 0.60 0.71 0.89 1.1 1.3 1.6 1.9 2.4 2.9 3 3 3 3
2GNSA
2IK6GN-SW2M 1.06 1.23 1.77 2.1 2.6 3.1 4.4 5.3 6.2 7.8 9.7 11.5 14.1 16.8 21 25 26 26 26 26
Synchronous Dust-Resistant
Motors
60 Hz Unit = Upper values: Nm/Lower values: lb-in
Speed
Model 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
r/min
Watertight,
Motor/
3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Motors
Gear Ratio
Gearhead
2RK6GN-AW2MU
0.10 0.12 0.17 0.20 0.25 0.30 0.42 0.50 0.60 0.75 0.90 1.1 1.4 1.6 2.0 2.4 2.7 3 3 3
2RK6GN-CW2ME 2GNSA
0.88 1.06 1.50 1.77 2.2 2.6 3.7 4.4 5.3 6.6 7.9 9.7 12.3 14.1 17.7 21 23 26 26 26
2IK6GN-SW2M
Motors
Torque
Permissible Overhung Load and Permissible Thrust Load
Right-Angle
Gearheads
Motor (Round shaft type) Page A-16
Gearhead Page A-16
Product Line A-116 / Characteristics A-118 / Dimensions A-118 / Connection Diagrams A-119 A-117
Standard AC Motors
200 200
Single-Phase 50 Hz Three-Phase 50 Hz
Single-Phase 60 Hz Three-Phase 60 Hz
(1/125 HP)
6W
150 150
Overrun [Rotations]
Overrun [Rotations]
Braking Time
5 Braking Time 5
Time [ms]
Time [ms]
(1/50 HP)
15 W
Starting Time
4 100 4 100
Starting Time
3 3
(1/30 HP)
25 W
2 50 2 50
Overrun Overrun
1 1
(1/19 HP)
40 W
0 0
0 0.025 0.05 0.075 0.1 0 0.025 0.05 0.075 0.1
[104 kgm2] [104 kgm2]
(1/12 HP)
60 W
0 0.1 0.2 0.3 0.4 0.5 0.6 0 0.1 0.2 0.3 0.4 0.5 0.6
Load Inertia J [oz-in2] Load Inertia J [oz-in2]
Mounting screws are included with gearheads. Dimensions for mounting screws Page A-310
Enter the gear ratio in the box () within the model name.
24 (0.94)
15.5 (0.61)
5 12.7 60 (2.36) .5 )
(0.28) 0 02
(0.20) (0.50) 70 6 0.
7
( 2.
60 (2.36)
60 (2.36)
Protective Earth
Terminal M4
5 (0.20)
44.5 (0.177) Thru 21.5 (0.85)
max.
3 Motor Leads 300 mm (12 in.) Length 22.5 Protective Earth Terminal
UL Style 3271, AWG20 M4
2 Break Leads 300 mm (12 in.) Length
UL Style 3266, AWG22 Detail Drawing of Protective Earth Terminal
0.5 (2
70
(2.126000.0012)
60 (2.36)
.5
Protective Earth Terminal M4 700 2)
540.030
0.0
(2.76
0
5 (0.20) max.
44.5 (0.177) Thru
44.5 (0.177) Thru
22.5
B+10 (0.39)
31 17 27 22
2RK6GN-AW2MU 2RK6A-AW2MU CH35FAUL2
B
(1.22) (0.67) (1.06) (0.78)
Included
31 17 27 23
2RK6GN-CW2ME 2RK6A-CW2ME CH08BFAUL
10 (0.18)
4.3 20
4.5
(1.22) (0.67) (1.06) (0.81)
(0.169) (0.79)
Introduction
(0.39)
AMP#187 6 (0.24)
C
Induction
Motors
(0.16)
4
Connection Diagrams
Reversible
Motors
The direction of motor rotation is as viewed from the shaft end of the motor. CW represents the clockwise direction, while CCW represents the
counterclockwise direction.
Brake Motors
Connection diagrams are also valid for the equivalent round shaft type.
magnetic
Electro-
SW1 operates both motor and electromagnetic brake action.
The electromagnetic brake will be released and the motor will rotate when SW1 is
switched simultaneously to ON.
When SW1 is switched simultaneously to OFF, the motor stops immediately with the
V Series
CCW CW
electromagnetic brake and holds the load.
R0 C0
White If you wish to release the brake while the motor is stopped, apply voltage between the
SW2
Single-Phase Motor
L CCW
CW Red two brake lead wires (orange).
Clutch &
Motors
Brake
Motor PE
2RK6GN-AW2MU R0 C0 Black Rotation Direction
2RK6GN-CW2ME N To rotate the motor in a clockwise (CW) direction, turn SW2 to CW.
ON Orange
SW1
ON To rotate the motor in a counterclockwise (CCW) direction, turn SW2 to CCW.
Synchronous Low-Speed
Electromagnetic
Orange
Motors
Brake
R0 C0 Specications
Capacitor Switch Single-Phase Single-Phase Note
No. 110/115 VAC Input 220/230 VAC Input
Synchronous Dust-Resistant
SW1 125 VAC 3 A minimum 250 VAC 1.5 A minimum Switched Simultaneously
Motors
SW2 (Inductive Load) (Inductive Load)
Watertight,
Motors
CW switched simultaneously to ON.
R0 C0 When SW1 is switched simultaneously to OFF, the motor stops immediately with the
Red electromagnetic brake and holds the load.
Three-Phase Motor
L1(R)
If you wish to release the brake while the motor is stopped, apply voltage between the
Motors
Torque
White
L2(S)
Motor PE two brake lead wires (orange).
2IK6GN-SW2M L3(T)
R0 C0 Black
Orange
Rotation Direction
To change the rotation direction, change any two connections between L1(R), L2(S)
Right-Angle
Gearheads
SW1 Electromagnetic
Orange Brake and L3(T).
R0 C0
Switch
Specications Note
No.
250 VAC 1.5 A minimum
SW1 Switched Simultaneously
Heads
Linear
(Inductive Load)
Product Line A-116 / Characteristics A-118 / Dimensions A-118 / Connection Diagrams A-119 A-119
Standard AC Motors
Specifications
6W
Motor
This type of motor does not contain a built-in friction brake mechanism.
(1/50 HP)
15 W
Output Starting
Model Rating Voltage Frequency Current Rated Torque Rated Speed Capacitor
Power Torque
Single-Phase 220
14.2
40 W
105
60 0.20 1450
30 15 14.9
3RK15GN-CW2ME 3RK15A-CW2ME 1.5
minutes 1/50 125
50 0.19 1200
100 17.7
Single-Phase 230
(1/12 HP)
14.2 105
60 W
60 0.20 1450
14.9
The U and E at the end of the model name indicate that the unit includes a capacitor. These letters are not listed on the motor nameplate.
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name. Page G-11
Details of safety standards Page G-2
(1/8 HP)
90 W
Product Line
Motor Parallel Shaft Gearhead (Sold separately)
Model Gearhead Type Gearhead Model Gear Ratio
Pinion Shaft Type Round Shaft Type 3, 3.6, 5, 6, 7.5, 9, 12.5,
3RK15GN-AW2MU 3RK15A-AW2MU Parallel Long Life, Low Noise 3GNSA 15, 18, 25, 30, 36, 50, 60,
3RK15GN-CW2ME 3RK15A-CW2ME Shaft GN-S Gearhead 75, 90, 100, 120, 150, 180
3GN10XS (Decimal Gearhead)
The following items are included in each product.
Enter the gear ratio in the box () within the model name.
Motor, Capacitor, Capacitor Cap, Operating Manual
The following items are included in each product.
Gearhead, Mounting Screws, Operating Manual
Following gearheads are also available. For details, please refer to website
(http://www.orientalmotor.com/) or contact the nearest Oriental Motor sales office.
Gearhead Type Gearhead Model Gear Ratio
Parallel 3GNKA 3180
Shaft GN-K Gearhead 3GN10XK (Decimal Gearhead)
Enter the gear ratio in the box () within the model name.
Introduction
To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio 10:1) between the gearhead and the motor.
In that case, the permissible torque is 5 Nm (44 lb-in).
Induction
Motors
Speed
Model 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
r/min
Motor/
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Gearhead
Reversible
Motors
0.30 0.36 0.51 0.61 0.76 0.91 1.3 1.5 1.8 2.3 2.7 3.3 4.1 5 5 5 5 5 5 5
3RK15GN-CW2ME 3GNSA
2.6 3.1 4.5 5.3 6.7 8.0 11.5 13.2 15.9 20 23 29 36 44 44 44 44 44 44 44
Brake Motors
magnetic
Electro-
Speed
Model 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
r/min
Motor/
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Gearhead
V Series
3RK15GN-AW2MU 0.26 0.31 0.43 0.51 0.64 0.77 1.1 1.3 1.5 1.9 2.3 2.8 3.5 4.2 5 5 5 5 5 5
3GNSA
3RK15GN-CW2ME 2.3 2.7 3.8 4.5 5.6 6.8 9.7 11.5 13.2 16.8 20 24 30 37 44 44 44 44 44 44
Clutch &
Motors
Brake
Motor (Round shaft type) Page A-16
Gearhead Page A-16
Synchronous Low-Speed
Motors
Permissible Load Inertia J of Gearhead
Page A-17
Synchronous Dust-Resistant
Motors
Starting and Braking Characteristics (Reference values)
Watertight,
200
Motors
Single-Phase 50 Hz
Single-Phase 60 Hz
Motors
Torque
150
Overrun [Rotations]
5
Time [ms]
Right-Angle
Gearheads
4 100 Braking Time
3 Heads
Linear
Starting Time
2 50
Overrun
Brake Pack
0
0 0.05 0.1 0.15 0.2
[104 kgm2]
Accessories
Product Line A-120 / Characteristics A-121 / Dimensions A-122 / Connection Diagrams A-123 A-121
Standard AC Motors
Mounting screws are included with gearheads. Dimensions for mounting screws Page A-310
(1.65)
6W
Enter the gear ratio in the box () within the model name.
9.52500.015
0
0.37500.0006 (3/8")
8.825 (0.347)
120 (4.72) L 32 (1.26)
16.5 (0.65)
15 (0.59)
(1/50 HP)
7 5 12.7
70 (2.76)
15 W
(1.18)
70 (2.76)
30
70 (2.76)
Protective Earth
(1/30 HP)
Terminal M4
25 W
21.5 (0.85)
5 (0.20)
Protective Earth Terminal
45.5 (0.217) Thru max.
22.5 M4
(1/19 HP)
A465 A009
640.030 (2.51970.0012)
43 (1.69)
60.012 (0.23620.0005)
30 13
0
0
(1/4 HP)
(1.18) (0.51)
200 W
2
(0.08)
32
)
0.5
(2.51970.0012
82 .02)
70 (2.76)
2 (1.26)
0
0
640.030
(3.23
0
(0.08)
0
2)
0.0
(3.23
70 (2.76)
0.5
82
Protective Earth Terminal
M4 45.5 (0.217) Thru
5 (0.20) max.
45.5 (0.217) Thru
22.5
A B C
Pinion Shaft Type Round Shaft Type Model g (oz.) Cap
B
38 21 31 35
3RK15GN-AW2MU 3RK15A-AW2MU CH60CFAUL2
(1.50) (0.83) (1.22) (1.24)
10 (0.18)
4.3 20 Included
4.5
(0.169) (0.79) 38 21 31 37
3RK15GN-CW2ME 3RK15A-CW2ME CH15BFAUL
(1.50) (0.83) (1.22) (1.31)
(0.39)
AMP#187 6 (0.24)
(0.16) C
4
Introduction
CCW CW When SW1 is switched simultaneously to OFF, the motor stops immediately with the
electromagnetic brake and holds the load.
R0 C0
White
SW2 If you wish to release the brake while the motor is stopped, apply voltage between the
L CCW
CW Red two brake lead wires (orange).
Induction
Motors
Motor PE
3RK15GN-AW2MU R0 C0 Black
Rotation Direction
3RK15GN-CW2ME N
SW1
ON Orange To rotate the motor in a clockwise (CW) direction, turn SW2 to CW.
ON
Electromagnetic To rotate the motor in a counterclockwise (CCW) direction, turn SW2 to CCW.
Reversible
Orange
Motors
Brake
R0 C0
Capacitor Specications
Switch Single-Phase Single-Phase Note
No. 110/115 VAC Input 220/230 VAC Input
Brake Motors
magnetic
125 VAC 3 A minimum 250 VAC 1.5 A minimum
Electro-
SW1 Switched Simultaneously
SW2 (Inductive Load) (Inductive Load)
V Series
EPCR1201-2 (CR circuit) is available as an accessory. Page A-302
How to connect a capacitor Page A-313
Clutch &
Motors
Brake
Instantaneous Stop Accessories
Brake Pack
Page A-277 Page A-287
Synchronous Low-Speed
Motors Synchronous Dust-Resistant
Motors
Watertight,
Motors
Motors
Torque
Right-Angle
Gearheads
Heads
Linear
Brake Pack
Accessories
Installation
Product Line A-120 / Characteristics A-121 / Dimensions A-122 / Connection Diagrams A-123 A-123
Standard AC Motors
Specifications
6W
Motor
This type of motor does not contain a built-in friction brake mechanism.
(1/50 HP)
15 W
Output Starting
Model Rating Voltage Frequency Current Rated Torque Rated Speed Capacitor
Power Torque
30 25 160 205
4RK25GN-CW2ME 4RK25A-CW2ME 50 0.25 1200 2.0
minutes 1/30 22 29
Single-Phase 230
140 170
60 0.28 1450
19.8 24
(1/12 HP)
60 W
240 190
50 0.23 1300
34 26
Three-Phase 200
25 160 160
4IK25GN-SW2M 4IK25A-SW2M Continuous 60 0.21 1550
1/30 22 22
(1/8 HP)
60 1600
Three-Phase 230 0.21 22 21
The U and E at the end of the model name indicate that the unit includes a capacitor. These letters are not listed on the motor nameplate.
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name. Page G-11
Details of safety standards Page G-2
(1/4 HP)
200 W
Product Line
Motor
Model
Pinion Shaft Type Round Shaft Type
4RK25GN-AW2MU 4RK25A-AW2MU
4RK25GN-CW2ME 4RK25A-CW2ME
4IK25GN-SW2M 4IK25A-SW2M
Introduction
4GN10XS (Decimal Gearhead)
Shaft GN-S Gearhead
Enter the gear ratio in the box () within the model name.
The following items are included in each product.
Parallel Shaft Gearhead
Induction
Gearhead, Mounting Screws, Operating Manual
Motors
Hollow Shaft Gearhead
Gearhead, Mounting Screws, Parallel Key, Safety Cover (with screws), Gasket, Operating Manual
Solid Shaft Gearhead
Gearhead, Mounting Screws, Gasket, Operating Manual
Reversible
Motors
Gearmotor Torque Table
Brake Motors
Gearheads and decimal gearheads are sold separately.
magnetic
Electro-
Enter the gear ratio in the box () within the gearhead model name.
A colored background ( ) indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite
direction.
V Series
The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual speed is 220% less than the displayed value, depending on the load.
To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio 10:1) between the gearhead and the motor.
In that case, the permissible torque is 8 Nm (70 lb-in). When a gearhead of 25:136:1 is connected, the value for permissible torque is
Clutch &
Motors
Brake
6 Nm (53 lb-in).
Synchronous Low-Speed
Speed
Motors
Model 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
r/min
Motor/
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Gearhead
Synchronous Dust-Resistant
0.50 0.60 0.83 1.0 1.2 1.5 2.1 2.5 3.0 3.7 4.5 5.4 6.8 8 8 8 8 8 8 8
4RK25GN-CW2ME 4GNSA
Motors
4.4 5.3 7.3 8.8 10.6 13.2 18.5 22 26 32 39 47 60 70 70 70 70 70 70 70
0.46 0.55 0.77 0.92 1.2 1.4 1.9 2.3 2.8 3.5 4.2 5.0 6.3 7.5 8 8 8 8 8 8
4IK25GN-SW2M 4GNSA
4.0 4.8 6.8 8.1 10.6 12.3 16.8 20 24 30 37 44 55 66 70 70 70 70 70 70
Watertight,
60 Hz
Motors
Unit = Upper values: Nm/Lower values: lb-in
Speed
Model 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
r/min
Motor/
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Motors
Torque
Gearhead
4RK25GN-AW2MU 0.41 0.50 0.69 0.83 1.0 1.2 1.7 2.1 2.5 3.1 3.7 4.5 5.6 6.7 8 8 8 8 8 8
4GNSA
4RK25GN-CW2ME 3.6 4.4 6.1 7.3 8.8 10.6 15.0 18.5 22 27 32 39 49 59 70 70 70 70 70 70
4IK25GN-SW2M
Right-Angle
0.39 0.47 0.65 0.78 0.97 1.2 1.6 1.9 2.3 2.9 3.5 4.2 5.3 6.3 7.9 8 8 8 8 8
Gearheads
4GNSA
(200 VAC) 3.4 4.1 5.7 6.9 8.5 10.6 14.1 16.8 20 25 30 37 46 55 69 70 70 70 70 70
4IK25GN-SW2M 0.36 0.44 0.61 0.73 0.91 1.1 1.5 1.8 2.2 2.7 3.3 3.9 5.0 5.9 7.4 8 8 8 8 8
4GNSA
(220/230 VAC) 3.1 3.8 5.3 6.4 8.0 9.7 13.2 15.9 19.4 23 29 34 44 52 65 70 70 70 70 70
Heads
Linear
Gearmotor Torque Table When Right-Angle Gearhead is Attached
Page A-250
Brake Pack
Page A-17
Product Line A-124 / Characteristics A-126 / Dimensions A-126 / Connection Diagrams A-127 A-125
Standard AC Motors
Single-Phase 50 Hz Three-Phase 50 Hz
200 Single-Phase 60 Hz 200 Three-Phase 60 Hz
Braking Time
(1/125 HP)
150 150
6W
Overrun [Rotations]
Overrun [Rotations]
Time [ms]
5
Time [ms]
Braking Time
(1/50 HP)
4 100
15 W
2 50
25 W
2 50
Overrun Overrun
1
1
(1/19 HP)
0
40 W
4IK25GN-SW2M 42.5
25180 A466BU
0
9.5250.015 (1.67)
0
0.37500.0006 (3/8") Enter the gear ratio in the box () within the model name.
8.825 (0.347)
130 (5.12) L 32
15 (0.59)
7 6 (1.26) 80 (3.15)
.5 )
16.5 (0.65)
(0.28) (0.24) 12.7 0 02
(0.50) 94 0 0.
7
( 3.
(1.34)
79 (3.11)
34
80 (3.15)
Protective Earth
Terminal M4
21.5 (0.85)
45.5 (0.217) Thru 5 (0.20)
max. Protective Earth Terminal
22.5 M4
3 Motor Leads 300 mm (12 in.) Length
UL Style 3271, AWG20
Detail Drawing of Protective Earth Terminal
2 Brake Leads 300 mm (12 in.) Length
UL Style 3266, AWG22
32 80.015 (0.31500.0006)
0 0 45.5 (1.79)
(1.26) 32 13.5
2 730.030 (2.87400.0012)
0 0
(0.08) (1.26) (0.53)
2) 2
0.0
(3.70 (0.08)
7 (0.28)
25 0.5
94
80 (3.15)
(0.98)
(2.87400.0012)
80 (3.15)
.5
Protective Earth Terminal M4 940 )
730.030
0.02
(3.70
0
0
5 (0.20) max.
45.5 (0.217) Thru
45.5 (0.217) Thru
22.5
B+10 (0.39)
48 21 31 41
4RK25GN-AW2MU 4RK25A-AW2MU CH80CFAUL2
B
(1.89) (0.83) (1.22) (1.45)
Included
48 19 29 36
4RK25GN-CW2ME 4RK25A-CW2ME CH20BFAUL
10 (0.18)
4.3 20
4.5
(1.89) (0.75) (1.14) (1.27)
(0.169) (0.79)
Introduction
(0.39)
AMP#187 6 (0.24)
C
Induction
Motors
(0.16)
4
Connection Diagrams
Reversible
Motors
The direction of motor rotation is as viewed from the shaft end of the motor. CW represents the clockwise direction, while CCW represents the
counterclockwise direction.
Connection diagrams are also valid for the equivalent round shaft type.
Brake Motors
magnetic
Electro-
SW1 operates both motor and electromagnetic brake action.
The electromagnetic brake will be released and the motor will rotate when SW1 is
switched simultaneously to ON.
CCW CW When SW1 is switched simultaneously to OFF, the motor stops immediately with the
V Series
R0 C0 electromagnetic brake and holds the load.
White
SW2
If you wish to release the brake while the motor is stopped, apply voltage between the
Single-Phase Motor
L CCW
CW Red two brake lead wires (orange).
PE
Clutch &
Motor
Motors
4RK25GN-AW2MU R0 C0
Brake
Black Rotation Direction
4RK25GN-CW2ME N
ON To rotate the motor in a clockwise (CW) direction, turn SW2 to CW.
SW1 Orange
ON To rotate the motor in a counterclockwise (CCW) direction, turn SW2 to CCW.
Electromagnetic
Orange
Synchronous Low-Speed
Brake
R0 C0 Specications
Motors
Capacitor Switch Single-Phase Single-Phase Note
No. 110/115 VAC Input 220/230 VAC Input
SW1 125 VAC 3 A minimum 250 VAC 1.5 A minimum Switched Simultaneously
Synchronous Dust-Resistant
SW2 (Inductive Load) (Inductive Load)
Motors
SW1 operates both motor and electromagnetic brake action.
The electromagnetic brake will be released and the motor will rotate when SW1 is
Watertight,
switched simultaneously to ON.
Motors
CW When SW1 is switched simultaneously to OFF, the motor stops immediately with the
R0 C0 electromagnetic brake and holds the load.
Three-Phase Motor
Red
L1(R)
If you wish to release the brake while the motor is stopped, apply voltage between the
White
Motors
Torque
L2(S) two brake lead wires (orange).
4IK25GN-SW2M Motor PE
R0 C0 Black
L3(T) Rotation Direction
Orange To change the rotation direction, change any two connections between L1(R), L2(S)
Right-Angle
and L3(T).
Gearheads
SW1 Electromagnetic
Orange Brake
Switch No. Specications Note
R0 C0
250 VAC 1.5 A minimum
SW1 Switched Simultaneously
(Inductive Load) Heads
Linear
PE: Protective Earth
R0 and C0 indicate CR circuit for surge suppression. [R0 = 5200 , C0 = 0.10.2 F, 200 WV (400 WV)]
EPCR1201-2 (CR circuit) is available as an accessory. Page A-302
How to connect a capacitor Page A-313
Brake Pack
Product Line A-124 / Characteristics A-126 / Dimensions A-126 / Connection Diagrams A-127 A-127
Standard AC Motors
Specifications
6W
Motor
This type of motor does not contain a built-in friction brake mechanism.
(1/50 HP)
15 W
Output Starting
Model Rating Voltage Frequency Current Rated Torque Rated Speed Capacitor
Power Torque
30 40 270 315
5RK40GN-CW2ME 5RK40A-CW2ME 50 0.38 1250 3.5
minutes 1/19 38 44
Single-Phase 230
260 260
60 0.43 1500
36 36
(1/12 HP)
60 W
400 300
50 0.32 1300
56 42
Three-Phase 200
40 260 260
5IK40GN-SW2M 5IK40A-SW2M Continuous 60 0.30 1550
1/19 36 36
(1/8 HP)
60 1600
Three-Phase 230 0.31 36 36
The U and E at the end of the model name indicate that the unit includes a capacitor. These letters are not listed on the motor nameplate.
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name. Page G-11
Details of safety standards Page G-2
(1/4 HP)
200 W
Introduction
The following items are included in each product. Shaft Solid Shaft 5GNRAA
Motor, Capacitor, Capacitor Cap, Operating Manual Parallel Long Life, Low Noise
5GN10XS (Decimal Gearhead)
Only for single-phase motors Shaft GN-S Gearhead
Enter the gear ratio in the box () within the model name.
Induction
The following items are included in each product.
Motors
Parallel Shaft Gearhead
Gearhead, Mounting Screws, Operating Manual
Hollow Shaft Gearhead
Gearhead, Mounting Screws, Parallel Key, Safety Cover (with screws), Gasket, Operating Manual
Reversible
Motors
Solid Shaft Gearhead
Gearhead, Mounting Screws, Gasket, Operating Manual
Following gearheads are also available. For details, please refer to website
Brake Motors
magnetic
(http://www.orientalmotor.com/) or contact the nearest Oriental Motor sales office.
Electro-
Gearhead Type Gearhead Model Gear Ratio
Parallel 5GNKA 3180
Shaft GN-K Gearhead 5GN10XK (Decimal Gearhead)
V Series
Enter the gear ratio in the box () within the model name.
Clutch &
Motors
Gearheads and decimal gearheads are sold separately.
Brake
Enter the gear ratio in the box () within the gearhead model name.
A colored background ( ) indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite
Synchronous Low-Speed
direction.
Motors
The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual speed is 220% less than the displayed value, depending on the load.
To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio 10:1) between the gearhead and the motor.
Synchronous Dust-Resistant
In that case, the permissible torque is 10 Nm (88 lb-in).
Motors
50 Hz Unit = Upper values: Nm/Lower values: lb-in
Speed
Model 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
r/min
Watertight,
Motors
Motor/
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Gearhead
0.77 0.92 1.3 1.5 1.9 2.3 3.2 3.8 4.6 5.7 6.9 8.3 10 10 10 10 10 10 10 10
5RK40GN-CW2ME 5GNSA
6.8 8.1 11.5 13.2 16.8 20 28 33 40 50 61 73 88 88 88 88 88 88 88 88
Motors
Torque
0.73 0.87 1.2 1.5 1.8 2.2 3.0 3.6 4.4 5.5 6.6 7.9 9.9 10 10 10 10 10 10 10
5IK40GN-SW2M 5GNSA
6.4 7.6 10.6 13.2 15.9 19.4 26 31 38 48 58 69 87 88 88 88 88 88 88 88
60 Hz
Right-Angle
Unit = Upper values: Nm/Lower values: lb-in
Gearheads
Speed
Model 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
r/min
Motor/
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Gearhead Heads
Linear
0.66 0.79 1.1 1.3 1.6 2.0 2.7 3.3 3.9 4.9 5.9 7.1 8.9 10 10 10 10 10 10 10
5RK40GN-AW2MU 5GNSA
5.8 6.9 9.7 11.5 14.1 17.7 23 29 34 43 52 62 78 88 88 88 88 88 88 88
5RK40GN-CW2ME 0.63 0.76 1.1 1.3 1.6 1.9 2.6 3.2 3.8 4.7 5.7 6.8 8.6 10 10 10 10 10 10 10
5GNSA
5IK40GN-SW2M 5.5 6.7 9.7 11.5 14.1 16.8 23 28 33 41 50 60 76 88 88 88 88 88 88 88
Brake Pack
Accessories
Installation
Product Line A-129 / Characteristics A-130 / Dimensions A-130 / Connection Diagrams A-132 A-129
Standard AC Motors
Three-Phase 50 Hz
250 250 Three-Phase 60 Hz
Single-Phase 50 Hz
Single-Phase 60 Hz
(1/19 HP)
40 W
200 200
Braking Time
Overrun [Rotations]
Overrun [Rotations]
Braking Time
Time [ms]
Time [ms]
(1/12 HP)
150 150
Starting Time
60 W
Starting Time
5 5
4 100 4 100
(1/8 HP)
90 W
3 3
2 Overrun 50
50 2
1 1 Overrun
(1/4 HP)
200 W
0 0
0 0.25 0.5 0.75 1 0 0.25 0.5 0.75 1
[104 kgm2] [104 kgm2]
0 1 2 3 4 5 6 0 1 2 3 4 5 6
Load Inertia J [oz-in2] Load Inertia J [oz-in2]
7.5 4 19 90 (3.54)
(0.30) (0.16) (0.75) 0.5 )
4 .02
16.5 (0.65)
10 9 0
0
( 4.
(1.42)
36
89 (3.50)
90 (3.54)
Protective Earth
Terminal M4
21.5 (0.85)
46.5 (0.256) Thru 5 (0.20)
max. Protective Earth Terminal
22.5 M4
3 Motor Leads 300 mm (12 in.) Length
UL Style 3271, AWG20
Detail Drawing of Protective Earth Terminal
2 Brake Leads 300 mm (12 in.) Length
UL Style 3266, AWG22
(3.267700.0014)
100.015 (0.39370.0006)
55 (2.17)
0 37 18
(1.46) (0.71)
Introduction
2
(0.08)
37
830.035
2 (1.46)
)
0
0
(3.26770.0014
0.5
90 (3.54)
(0.08) 104 2)
830.035
0.0
(4.09
Induction
Motors
0
2)
0.0
9 (0.35)
30 0.5 (4.09
104
90 (3.54)
(1.18)
Protective Earth
Reversible
Terminal M4
46.5 (0.256) Thru
Motors
5 (0.20) max.
46.5 (0.256) Thru
Brake Motors
magnetic
Electro-
22.5
V Series
A
B+10 (0.39)
B
(0.18)
4.3
Clutch &
20
Motors
4.5
Brake
(0.169) (0.79)
(0.39)
10
AMP#187 6 (0.24)
Synchronous Low-Speed
Motors
(0.16) C
4
Synchronous Dust-Resistant
Motors
Capacitor Dimensions Unit = mm (in.)
Model Capacitor Mass Capacitor
A B C
Model g (oz.) Cap
Watertight,
Pinion Shaft Type Round Shaft Type
Motors
58 22 35 60
5RK40GN-AW2MU 5RK40A-AW2MU CH120CFAUL2
(2.28) (0.87) (1.38) (2.1)
Included
58 22 35 59
5RK40GN-CW2ME 5RK40A-CW2ME CH35BFAUL
(2.28) (0.87) (1.38) (2.1)
Motors
Torque
Right-Angle
Gearheads
Heads
Linear
Brake Pack
Accessories
Installation
Product Line A-129 / Characteristics A-130 / Dimensions A-130 / Connection Diagrams A-132 A-131
Standard AC Motors
Connection Diagrams
The direction of motor rotation is as viewed from the shaft end of the motor. CW represents the clockwise direction, while CCW represents the
counterclockwise direction.
Connection diagrams are also valid for the equivalent round shaft type.
CCW CW When SW1 is switched simultaneously to OFF, the motor stops immediately with the
6W
L CCW If you wish to release the brake while the motor is stopped, apply voltage between the
CW Red
two brake lead wires (orange).
(1/50 HP)
Motor PE
15 W
5RK40GN-AW2MU R0 C0 Black
5RK40GN-CW2ME N Rotation Direction
ON Orange
SW1
ON To rotate the motor in a clockwise (CW) direction, turn SW2 to CW.
Electromagnetic To rotate the motor in a counterclockwise (CCW) direction, turn SW2 to CCW.
Orange
(1/30 HP)
Brake
R0 C0
25 W
Capacitor Specications
Switch Single-Phase Single-Phase Note
No. 110/115 VAC Input 220/230 VAC Input
(1/19 HP)
The electromagnetic brake will be released and the motor will rotate when SW1 is
60 W
L1(R)
(1/8 HP)
90 W
If you wish to release the brake while the motor is stopped, apply voltage between the
White
L2(S) two brake lead wires (orange).
Motor PE
5IK40GN-SW2M L3(T)
R0 C0 Black
Rotation Direction
Orange To change the rotation direction, change any two connections between L1(R), L2(S)
(1/4 HP)
200 W
Introduction
Specifications
Motor
This type of motor does not contain a built-in friction brake mechanism.
Induction
Motors
Output Starting
Model Rating Voltage Frequency Current Rated Torque Rated Speed Capacitor
Power Torque
Reversible
HP VAC Hz A oz-in oz-in r/min F
Motors
30 60 Single-Phase 110 380 405
5RK60GE-AW2MU 5RK60A-AW2MU 60 1.24 1450 20
minutes 1/12 Single-Phase 115 53 57
380 405
Single-Phase 220 60 0.61 1450
Brake Motors
53 57
magnetic
Electro-
30 60 470 490
5RK60GE-CW2ME 5RK60A-CW2ME 50 0.59 1200 5.0
minutes 1/12 66 69
Single-Phase 230
380 405
60 0.61 1450
53 57
V Series
600 450
50 0.50 1300
85 63
Three-Phase 200
60 500 380
5IK60GE-SW2M 5IK60A-SW2M Continuous 60 0.43 1550
1/12 71 53
Clutch &
Motors
Three-Phase 220 0.45
Brake
500 380
60 1600
Three-Phase 230 0.46 71 53
The U and E at the end of the model name indicate that the unit includes a capacitor. These letters are not listed on the motor nameplate.
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name. Page G-11
Synchronous Low-Speed
Details of safety standards Page G-2
Motors
Details of RoHS Directive Page G-38
: Contains a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
(The power supply to the electromagnetic brake is kept and the brake is released.)
When the motor temperature drops, the thermal protector closes and the motor restarts. Be sure to turn the motor power off before inspecting.
Synchronous Dust-Resistant
Motors
Electromagnetic Brake (Power Off Activated Type)
Voltage Frequency Current Input Holding Brake Torque
Motor Model mNm
Watertight,
Motors
VAC Hz A W oz-in
5RK60GE-AW2MU Single-Phase 110 500
60 0.13 10
5RK60A-AW2MU Single-Phase 115 71
Single-Phase 220 60
5RK60GE-CW2ME 500
Motors
Torque
50 0.07 10
5RK60A-CW2ME Single-Phase 230 71
60
50
Single-Phase 200
5IK60GE-SW2M 60 500
Right-Angle
0.07 10
Gearheads
5IK60A-SW2M Single-Phase 220 71
60
Single-Phase 230
Heads
Linear
Brake Pack
Accessories
Installation
Product Line A-134 / Characteristics A-135 / Dimensions A-135 / Connection Diagrams A-137 A-133
Standard AC Motors
Product Line
Motor Parallel Shaft Gearhead/Right-Angle Gearhead
Model (Sold separately)
Pinion Shaft Type Round Shaft Type Gearhead Type Gearhead Model Gear Ratio
5RK60GE-AW2MU 5RK60A-AW2MU Parallel Long Life
5RK60GE-CW2ME 5RK60A-CW2ME 5GESA 3, 3.6, 5, 6, 7.5, 9, 12.5, 15,
Shaft GE-S Gearhead
5IK60GE-SW2M 5IK60A-SW2M 18, 25, 30, 36, 50, 60, 75, 90,
Right-Angle Hollow Shaft 5GERH
100, 120, 150, 180
(1/125 HP)
The following items are included in each product. Shaft Solid Shaft 5GERAA
6W
A colored background ( ) indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite
direction.
The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
(1/8 HP)
The actual speed is 220% less than the displayed value, depending on the load.
90 W
To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio 10:1) between the gearhead and the motor.
In that case, the permissible torque is 20 Nm (177 lb-in).
50 Hz
(1/4 HP)
Speed
Model 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
r/min
Motor/
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Gearhead
1.2 1.4 2.0 2.4 3.0 3.6 4.5 5.4 6.4 8.1 9.7 11.6 16.2 19.4 20 20 20 20 20 20
5RK60GE-CW2ME 5GESA
10.6 12.3 17.7 21 26 31 39 47 56 71 85 102 143 171 177 177 177 177 177 177
1.1 1.3 1.8 2.2 2.7 3.3 4.1 4.9 5.9 7.4 8.9 10.7 14.9 17.8 19.9 20 20 20 20 20
5IK60GE-SW2M 5GESA
9.7 11.5 15.9 19.7 23 29 36 43 52 65 78 94 131 157 176 177 177 177 177 177
Speed
Model 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
r/min
Motor/
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Gearhead
5RK60GE-AW2MU 0.98 1.2 1.6 2.0 2.5 3.0 3.7 4.4 5.3 6.7 8.0 9.6 13.4 16.0 17.9 20 20 20 20 20
5GESA
5RK60GE-CW2ME 8.6 10.6 14.1 17.7 22 26 32 38 46 59 70 84 118 141 158 177 177 177 177 177
0.92 1.1 1.5 1.8 2.3 2.8 3.5 4.2 5.0 6.3 7.5 9.0 12.5 15.0 16.8 20 20 20 20 20
5IK60GE-SW2M 5GESA
8.1 9.7 13.2 15.9 20 24 30 37 44 55 66 79 110 132 148 177 177 177 177 177
150 150
Introduction
Braking Time
Overrun [Rotations]
Overrun [Rotations]
Braking Time
Time [ms]
Time [ms]
5 100 5 100
Starting Time
Induction
Motors
4 Starting Time 4
3 3
50 50
2 2
Reversible
Overrun
Motors
Overrun
1 1
0 0
0 0.25 0.5 0.75 1 1.25 0 0.25 0.5 0.75 1 1.25
Brake Motors
[104 kgm2] [104 kgm2]
magnetic
Electro-
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
Load Inertia J [oz-in2] Load Inertia J [oz-in2]
V Series
Dimensions Unit = mm (in.)
Mounting screws are included with gearheads. Dimensions for mounting screws Page A-310
Motor/Gearhead
Clutch &
Motors
Brake
Mass: Motor 3.4 kg (7.5 lb.)
Gearhead 1.5 kg (3.3 lb.)
A470U
0
15.8750.011
Synchronous Low-Speed
164 (6.46) 65 (2.56) 38 0 92 (3.62) 0.5 )
0.62500.0004 (5/8")
Motors
7.5 7 (1.50) 4 .02
90 (3.54) 10 9 0
(0.30) (0.28) 29.50.5 (1.160.02) 0
( 4.
28.58 (1.13)
Synchronous Dust-Resistant
(1.34)
34
Motors
92 (3.62)
90 (3.54)
18 (0.71)
17 (0.67)
Watertight,
Motors
(0.57)
14.5
5 (0.20)
Motors
Torque
Protective Earth
2 Brake Leads UL Style 3266, AWG22 Terminal M4
Cable direction can be switched to the opposite direction.
Right-Angle
Gearheads
21.5 (0.85)
Heads
Linear
(0.65)
+0.1
16.5
2.743
0
M4 0 +0.040
28.580.2 4.7630.03 4.763 0
(1.1250.008) (0.18750.0012
0
) (0.1875+0.0016
0 )
Brake Pack
Product Line A-134 / Characteristics A-135 / Dimensions A-135 / Connection Diagrams A-137 A-135
Standard AC Motors
0
40 (1.57) 21
2 (0.83)
(1/125 HP)
(0.08)
6W
37
2 (1.46) 92 (3.62)
0
(3.26770.0014)
90 (3.54)
0.5
(0.08) 46.5 (0.256) Thru 104 )
830.035
0.02
(4.09
0
(1/50 HP)
0
11 (0.43)
15 W
30
90 (3.54)
(1.18) 0.5
104 2)
92 (3.62)
0.0
(4.09
410.8 (0.425) Thru
(1/30 HP)
25 W
M4 27
(1/19 HP)
(1.06)
40 W
A B C
60 W
Included
58 29 41 93
5RK60GE-CW2ME 5RK60A-CW2ME CH50BFAUL
(1/8 HP)
4.3
(0.28)
20
7
(0.169) (
0.79)
(0.39)
(1/4 HP)
6 (0.24)
200 W
AMP#187
10
R
(R 10
0.3
C
9)
(0.16)
4
Introduction
CCW CW When SW1 is switched simultaneously to OFF, the motor stops immediately with the
R0 C0
electromagnetic brake and holds the load.
White
SW2
Single-Phase Motor
L CCW If you wish to release the brake while the motor is stopped, apply voltage between the
CW Red two brake lead wires (orange).
Induction
Motors
Motor PE
5RK60GE-AW2MU R0 C0 Black
5RK60GE-CW2ME Rotation Direction
N
ON Orange To rotate the motor in a clockwise (CW) direction, turn SW2 to CW.
SW1
ON
Electromagnetic To rotate the motor in a counterclockwise (CCW) direction, turn SW2 to CCW.
Reversible
Orange
Motors
Brake
R0 C0
Capacitor
Specications
Switch Single-Phase Single-Phase Note
No. 110/115 VAC Input 220/230 VAC Input
Brake Motors
magnetic
125 VAC 5 A minimum 250 VAC 5 A minimum
Electro-
SW1 Switched Simultaneously
SW2 (Inductive Load) (Inductive Load)
V Series
The electromagnetic brake will be released and the motor will rotate when SW1 is
switched simultaneously to ON.
CW
When SW1 is switched simultaneously to OFF, the motor stops immediately with the
R0 C0
electromagnetic brake and holds the load.
Red
Clutch &
Three-Phase Motor
L1(R)
Motors
Brake
If you wish to release the brake while the motor is stopped, apply voltage between the
White
L2(S) two brake lead wires (orange).
Motor PE
5IK60GE-SW2M R0 C0 Black
L3(T)
Rotation Direction
Synchronous Low-Speed
Orange To change the rotation direction, change any two connections between L1(R), L2(S)
Motors
SW1 Electromagnetic and L3(T).
Orange Brake
Switch
R0 C0 Specications Note
No.
Synchronous Dust-Resistant
250 VAC 5 A minimum
Motors
SW1 Switched Simultaneously
(Inductive Load)
Watertight,
R0 and C0 indicate CR circuit for surge suppression. [R0 = 5200 , C0 = 0.10.2 F, 200 WV (400 WV)]
Motors
EPCR1201-2 (CR circuit) is available as an accessory. Page A-302
How to connect a capacitor Page A-313
Motors
Torque
Space-Saving Instantaneous Stop Accessories
Right-Angle Gearheads Brake Pack
Page A-239 Page A-277 Page A-287
Right-Angle
Gearheads
Heads
Linear
Brake Pack
Accessories
Installation
Product Line A-134 / Characteristics A-135 / Dimensions A-135 / Connection Diagrams A-137 A-137
Standard AC Motors
Specifications
6W
Motor
This type of motor does not contain a built-in friction brake mechanism.
(1/50 HP)
15 W
Output Starting
Model Rating Voltage Frequency Current Rated Torque Rated Speed Capacitor
Power Torque
90 600 730
5RK90GE-CW2ME 5RK90A-CW2ME 30 minutes 50 0.82 1200 7.0
1/8 85 103
Single-Phase 230
590 605
60 0.96 1450
83 85
(1/12 HP)
850 680
60 W
50 0.64 1300
120 96
Three-Phase 200
90 700 570
5IK90GE-SW2M 5IK90A-SW2M Continuous 60 0.59 1550
1/8 99 80
(1/8 HP)
60 1600
Three-Phase 230 0.61 99 80
The U and E at the end of the model name indicate that the unit includes a capacitor. These letters are not listed on the motor nameplate.
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name. Page G-11
Details of safety standards Page G-2
(1/4 HP)
200 W
Introduction
The following items are included in each product. Shaft Solid Shaft 5GERAA
Motor, Capacitor, Capacitor Cap, Operating Manual Parallel Long Life
5GE10XS (Decimal Gearhead)
Only for single-phase motors Shaft GE-S Gearhead
Enter the gear ratio in the box () within the model name.
Induction
The following items are included in each product.
Motors
Parallel Shaft Gearhead
Gearhead, Mounting Screws, Parallel Key, Operating Manual
Hollow Shaft Gearhead
Gearhead, Mounting Screws, Parallel Key, Safety Cover (with screws), Gasket, Operating Manual
Reversible
Motors
Solid Shaft Gearhead
Gearhead, Mounting Screws, Parallel Key, Gasket, Operating Manual
Brake Motors
Gearmotor Torque Table
magnetic
Electro-
Gearheads and decimal gearheads are sold separately.
Enter the gear ratio in the box () within the gearhead model name.
A colored background ( ) indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite
V Series
direction.
The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual speed is 220% less than the displayed value, depending on the load.
Clutch &
To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio 10:1) between the gearhead and the motor.
Motors
Brake
In that case, the permissible torque is 20 Nm (177 lb-in).
Synchronous Low-Speed
Motors
Speed
Model 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 12.5 10 8.3
r/min
Motor/
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Gearhead
Synchronous Dust-Resistant
Motors
1.8 2.1 3.0 3.5 4.4 5.3 6.7 8.0 9.6 12.0 14.5 17.3 20 20 20 20 20 20 20 20
5RK90GE-CW2ME 5GESA
15.9 18.5 26 30 38 46 59 70 84 106 128 153 177 177 177 177 177 177 177 177
1.7 2.0 2.8 3.3 4.1 5.0 6.2 7.4 8.9 11.2 13.5 16.2 20 20 20 20 20 20 20 20
5IK90GE-SW2M 5GESA
15.0 17.7 24 29 36 44 54 65 78 99 119 143 177 177 177 177 177 177 177 177
Watertight,
Motors
60 Hz Unit = Upper values: Nm/Lower values: lb-in
Speed
Model 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
r/min
Motors
Torque
Motor/
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Gearhead
1.4 1.7 2.4 2.8 3.6 4.3 5.3 6.4 7.7 9.7 11.6 13.9 19.3 20 20 20 20 20 20 20
5RK90GE-AW2MU 5GESA
12.3 15.0 21 24 31 38 46 56 68 85 102 123 170 177 177 177 177 177 177 177
Right-Angle
Gearheads
1.5 1.8 2.5 2.9 3.7 4.4 5.5 6.6 7.9 10.0 12.0 14.4 20 20 20 20 20 20 20 20
5RK90GE-CW2ME 5GESA
13.2 15.9 22 25 32 38 48 58 69 88 106 127 177 177 177 177 177 177 177 177
1.4 1.7 2.3 2.8 3.5 4.2 5.2 6.2 7.5 9.4 11.3 13.5 18.8 20 20 20 20 20 20 20
5IK90GE-SW2M 5GESA
12.3 15.0 20 24 30 37 46 54 66 83 100 119 166 177 177 177 177 177 177 177
Heads
Linear
Page A-17
Product Line A-139 / Characteristics A-140 / Dimensions A-140 / Connection Diagrams A-142 A-139
Standard AC Motors
150 150
(1/125 HP)
Braking Time
Braking Time
Overrun [Rotations]
6W
Overrun [Rotations]
Time [ms]
Time [ms]
5 100 5 100 Starting Time
(1/50 HP)
4
15 W
Starting Time 4
3 3
50 50
2 2 Overrun
(1/30 HP)
25 W
Overrun
1 1
0 0
0 0.25 0.5 0.75 1 1.25 0 0.25 0.5 0.75 1 1.25
(1/19 HP)
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
Load Inertia J [oz-in2] Load Inertia J [oz-in2]
(1/12 HP)
Dimensions
60 W
Unit = mm (in.)
Mounting screws are included with gearheads. Dimensions for mounting screws Page A-310
Motor/Gearhead
(1/8 HP)
90 W
0
15.8750.011
200 W
92 (3.62)
90 (3.54)
18 (0.71)
17 (0.67)
(0.57)
14.5
5 (0.20)
+0.1
2.743 0
0
4.7630.03
0
0 +0.040
(0.65)
Introduction
(0.08)
37
830.035
)
2 (1.46) 92 (3.62)
(3.26770.0014
0
90 (3.54)
0.5
104 )
830.035
(0.08) 46.5 (0.256) Thru 0.02
(4.09
0
0
Induction
Motors
11 (0.43)
30
90 (3.54)
(1.18) 0.5
104 2)
92 (3.62)
0.0
(4.09
410.8 (0.425) Thru
Reversible
Motors
Protective Earth Terminal
Brake Motors
(0.57)
14.5
27
magnetic
Electro-
M4
(1.06)
V Series
A B C
A Pinion Shaft Type Round Shaft Type Model g (oz.) Cap
58 35 50 140
B+15 (0.59)
Included
58 35 50 138
CH70BFAUL
Clutch &
5RK90GE-CW2ME 5RK90A-CW2ME
Motors
Brake
(2.28) (1.38) (1.97) (4.9)
4.3
(0.28)
20
7
(0.169) (
0.79)
Synchronous Low-Speed
(0.39)
Motors
AMP#187 6 (0.24)
10
R
(R 10
Synchronous Dust-Resistant
0.3
C
Motors
9)
(0.16)
4
Watertight,
Motors
Motors
Torque
Right-Angle
Gearheads
Heads
Linear
Brake Pack
Accessories
Installation
Product Line A-139 / Characteristics A-140 / Dimensions A-140 / Connection Diagrams A-142 A-141
Standard AC Motors
Connection Diagrams
The direction of motor rotation is as viewed from the shaft end of the motor. CW represents the clockwise direction, while CCW represents the
counterclockwise direction.
Connection diagrams are also valid for the equivalent round shaft type.
SW1 operates both motor and electromagnetic brake action.
The electromagnetic brake will be released and the motor will rotate when SW1 is
switched simultaneously to ON.
(1/125 HP)
When SW1 is switched simultaneously to OFF, the motor stops immediately with the
CCW CW
6W
L CCW
two brake lead wires (orange).
(1/50 HP)
CW Red
15 W
Motor PE
5RK90GE-AW2MU R0 C0 Black Rotation Direction
5RK90GE-CW2ME N To rotate the motor in a clockwise (CW) direction, turn SW2 to CW.
ON Orange
SW1
ON To rotate the motor in a counterclockwise (CCW) direction, turn SW2 to CCW.
Electromagnetic
(1/30 HP)
Orange Brake
25 W
R0 C0 Specications
Capacitor Switch Single-Phase Single-Phase Note
No. 110/115 VAC Input 220/230 VAC Input
(1/19 HP)
The electromagnetic brake will be released and the motor will rotate when SW1 is
60 W
L1(R)
(1/8 HP)
90 W
If you wish to release the brake while the motor is stopped, apply voltage between the
White
L2(S) two brake lead wires (orange).
Motor PE
5IK90GE-SW2M L3(T)
R0 C0 Black
Rotation Direction
Orange To change the rotation direction, change any two connections between L1(R), L2(S)
(1/4 HP)
200 W
Introduction
Features
Induction
High Power 200 W (1/4 HP) "Combination Type" for Easy Installation
Motors
Smallest frame size among 200 W (1/4 HP) motors The combination type comes with the motor and gearhead
Hypoid Gear-Employed Right-Angle Gearheads pre-assembled. This enables easy installation in equipment.
Reversible
Right-angle gearheads employ hypoid gears. Hollow shafts and solid
Motors
Combination Type:
shafts are available to enable space-saving.
The combination type comes with the motor and its dedicated
RoHS-Compliant gearhead pre-assembled, which simplifies installation in
equipment. Motors and gearheads are also available separately to
Brake Motors
The BH Series conforms to the RoHS Directive that prohibits the use facilitate changes or repairs.
magnetic
Electro-
of six chemical substances including lead and cadmium.
Details of RoHS Directive Page G-38
V Series
Output Starting
Model Voltage Frequency Current Rated Torque Rated Speed Capacitor
Power Torque
W Nm Nm
Clutch &
Combination Type Round Shaft Type
Motors
Brake
HP VAC Hz A oz-in oz-in r/min F
0.88
BHI62FMT-RH Single-Phase 110
200 124 1.27
BHI62FMT-RA BHI62FMT-A 60 3 1500 40
Synchronous Low-Speed
1/4 0.98 180
BHI62FMT- Single-Phase 115
Motors
139
0.98 1.27
Single-Phase 220 60 1.5 1500 10
139 180
BHI62EMT-RH
200 1.52
Synchronous Dust-Resistant
BHI62EMT-RA BHI62EMT-A 50 1250
1/4 210
Motors
BHI62EMT- 0.98
Single-Phase 230 1.5 10
139 1.27
60 1500
180
1.49 1.49
50 1250
Watertight,
210 210
Motors
Three-Phase 200 1.1
1.25 1.25
BHI62SMT-RH 60 1500
200 177 177
BHI62SMT-RA BHI62SMT-A
1/4 1.23 1.23
BHI62SMT- Three-Phase 220 60 1550
174 174
Motors
Torque
0.95
1.18 1.18
Three-Phase 230 60 1600
167 167
Enter the gear ratio in the box () within the model name. The values for each specification applies to the motor only.
Right-Angle
Details of safety standards Page G-2
Gearheads
List of safety standard approved products (Model, Standards, Standards File No., Certification Body) Page G-11
: Contains a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
(The power supply to the electromagnetic brake is kept and the brake is released.)
When the motor temperature drops, the thermal protector closes and the motor restarts. Be sure to turn the motor power off before inspecting.
Heads
Linear
Electromagnetic Brake (Power Off Activated Type)
Voltage Frequency Current Input Holding Brake Torque
Motor Model Nm
Brake Pack
VAC Hz A W oz-in
BHI62FMT-RH, BHI62FMT-RA Single-Phase 110 1.5
60 0.17 12
BHI62FMT-, BHI62FMT-A Single-Phase 115 210
1.5
Accessories
Characteristics A-145 / Dimensions A-146 / Connection Diagrams A-150 / Motor and Gearhead Combinations A-151 A-143
Standard AC Motors
Product Line
Combination Type Round Shaft Type
Right-Angle Shaft Voltage Model
Type Voltage Model Gear Ratio Single-Phase
BHI62FMT-A
Single-Phase 110/115 VAC
BHI62FMT-RH
110/115 VAC Single-Phase
BHI62EMT-A
Single-Phase 220/230 VAC
Hollow Shaft BHI62EMT-RH
(1/125 HP)
Single-Phase
Solid Shaft BHI62EMT-RA
220/230 VAC
Three-Phase
BHI62SMT-RA
200/220/230 VAC
(1/30 HP)
25 W
Enter the gear ratio in the box () within the model name.
The following items are included in each product.
Motor, Gearhead, Capacitor, Capacitor Cap, Parallel Key, Operating Manual
Only for single-phase motors
(1/19 HP)
40 W
Parallel Shaft
Voltage Model Gear Ratio
Single-Phase
BHI62FMT-
(1/12 HP)
110/115 VAC
60 W
3, 3.6, 5, 6, 7.5,
Single-Phase 9, 12.5, 15, 18, 25,
BHI62EMT-
220/230 VAC 30, 36, 50, 60, 75,
Three-Phase 90, 100, 120, 150, 180
BHI62SMT-
(1/8 HP)
200/220/230 VAC
90 W
Enter the gear ratio in the box () within the model name.
The following items are included in each product.
Motor, Gearhead, Capacitor, Capacitor Cap, Mounting Screws, Parallel Key,
(1/4 HP)
Operating Manual
200 W
Speed
300 250 200 167 120 100 83 60 50 42 30 25 20 17 15 12.5 10 8.3
Model r/min
Gear Ratio 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
5.5 6.7 8.3 10.0 13.9 16.6 20.0 27.7 33.3 36.0 40.0 43.0 47.0 51.5 54.5 60 60 60
BHI62EMT-RH/RA
48 59 73 88 123 146 177 240 290 310 350 380 410 450 480 530 530 530
5.4 6.5 8.2 9.8 13.6 16.3 19.6 27.2 32.6 36.0 40.0 43.0 47.0 51.5 54.5 60 60 60
BHI62SMT-RH/RA
47 57 72 86 120 144 173 240 280 310 350 380 410 450 480 530 530 530
Speed
360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
Model r/min
Gear Ratio 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
BHI62FMT-RH/RA 4.6 5.6 7.0 8.3 11.6 13.9 16.7 23.2 27.8 33.4 40.0 43.0 47.0 51.5 54.5 60 60 60
BHI62EMT-RH/RA 40 49 61 73 102 123 147 200 240 290 350 380 410 450 480 530 530 530
4.6 5.5 6.8 8.2 11.4 13.7 16.4 22.8 27.4 32.9 40.0 43.0 47.0 51.5 54.5 60 60 60
BHI62SMT-RH/RA (200 VAC)
40 48 60 72 100 121 145 200 240 290 350 380 410 450 480 530 530 530
4.5 5.4 6.7 8.1 11.2 13.5 16.2 22.4 26.9 32.3 40.0 43.0 47.0 51.5 54.5 60 60 60
BHI62SMT-RH/RA (220 VAC)
39 47 59 71 99 119 143 198 230 280 350 380 410 450 480 530 530 530
4.3 5.2 6.5 7.8 10.8 12.9 15.5 21.5 25.8 31.0 40.0 43.0 47.0 51.5 54.5 60 60 60
BHI62SMT-RH/RA (230 VAC)
38 46 57 69 95 114 137 190 220 270 350 380 410 450 480 530 530 530
Speed
500 417 300 250 200 167 120 100 83 60 50 42 30 25 20 17 15 12.5 10 8.3
Model r/min
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
4.1 4.9 6.8 8.2 10.3 12.3 16.3 19.6 23.5 32.7 39.2 40 40 40 40 40 40 40 40 40
BHI62EMT-
36 43 60 72 91 108 144 173 200 280 340 350 350 350 350 350 350 350 350 350
4.0 4.8 6.7 8.0 10.1 12.1 16.0 19.2 23.1 32.0 38.4 40 40 40 40 40 40 40 40 40
BHI62SMT-
35 42 59 70 89 107 141 169 200 280 330 350 350 350 350 350 350 350 350 350
Introduction
Parallel Shaft 60 Hz Unit = Upper values: Nm/Lower values: lb-in
Speed
600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
Model r/min
Induction
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Motors
BHI62FMT- 3.4 4.1 5.7 6.9 8.6 10.3 13.7 16.4 19.7 27.3 32.8 39.3 40 40 40 40 40 40 40 40
BHI62EMT- 30 36 50 61 76 91 121 145 174 240 290 340 350 350 350 350 350 350 350 350
3.4 4.1 5.6 6.8 8.4 10.1 13.4 16.1 19.4 26.9 32.3 38.7 40 40 40 40 40 40 40 40
BHI62SMT- (200 VAC)
Reversible
30 36 49 60 74 89 118 142 171 230 280 340 350 350 350 350 350 350 350 350
Motors
3.3 4.0 5.5 6.6 8.3 10.0 13.2 15.9 19.0 26.4 31.7 38.1 40 40 40 40 40 40 40 40
BHI62SMT- (220 VAC)
29 35 48 58 73 88 116 140 168 230 280 330 350 350 350 350 350 350 350 350
3.2 3.8 5.3 6.4 8.0 9.6 12.7 15.2 18.3 25.4 30.4 36.5 40 40 40 40 40 40 40 40
BHI62SMT- (230 VAC)
Brake Motors
28 33 46 56 70 84 112 134 161 220 260 320 350 350 350 350 350 350 350 350
magnetic
Electro-
Permissible Overhung Load and Permissible Thrust Load
Combination Type Page A-16
V Series
Round Shaft Type Page A-16
Clutch &
Motors
Brake
Page A-17
Synchronous Low-Speed
Starting and Braking Characteristics (Reference values)
Motors
Single-Phase Motor Three-Phase Motor
Single-Phase 50 Hz Three-Phase 50 Hz
Synchronous Dust-Resistant
250 250
Motors
Single-Phase 60 Hz Braking Time Three-Phase 60 Hz
200 200
Braking Time
Watertight,
Overrun [Rotations]
Overrun [Rotations]
Starting Time
Motors
Time [ms]
Time [ms]
Motors
Torque
4 100 4 100
3 Overrun 3
2 50 2 50 Starting Time
Right-Angle
Gearheads
1 1
0 0
0 0.5 1.0 1.5 2.0 0 0.5 1.0 1.5 2.0
[104 kgm2] [104 kgm2]
Heads
0 2 4 6 8 10 0 2 4 6 8 10 Linear
Load Inertia J [oz-in2] Load Inertia J [oz-in2]
Brake Pack
Accessories
Installation
Characteristics A-145 / Dimensions A-146 / Connection Diagrams A-150 / Motor and Gearhead Combinations A-151 A-145
Standard AC Motors
A384
6W
15 (0.59) 15 (0.59)
15 W
118 (4.65)
99 (3.90)
(1/30 HP)
16 (0.63)
25 W
10.5 (0.41)
(1/19 HP)
(0.16)
40 W
4
0 0
0
580.046 Flange Mounting Surface
(2.283500.0018) AA
(1/12 HP)
175 (6.89)
60 W
+0.033
(0.9843+0.0013)
58 (2.28)
+0.04
25 0 0
8
(1/8 HP)
0
0.5 02)
90 W
+0.0016 0 .
(
0.31 0 ) 12 72 0
( 4.
A
(1/4 HP)
200 W
104 (4.09)
(1.11)
28.3
Key
(The key is included with the gearhead)
(0.31500.0014
0
)
80.036
0 0
250.2 70.036
0
(0.98400.008) (0.27560.0014
0
)
Enter the gear ratio in the box () within the model name.
Introduction
103 (4.06)
118 (4.65)
99 (3.90)
16 (0.63)
Induction
Motors
10.5 (0.41)
Reversible
(1.570.02) 4 (0.16)
48 (1.89)
Motors
(1.26)
32
102 (4.02)
Brake Motors
220.021 (0.86610.0008)
0 0
magnetic
Electro-
400.5
24.5 (0.96)
580.046 (2.28350.0018)
0 0
V Series
175 (6.89)
100 (3.94) 32 (1.26) max. 74 (2.91)
24 (0.94)
58 (2.28)
Clutch &
Motors
Brake
0.5 2)
0 0.0
12 .72
(4
Synchronous Low-Speed
Motors
104 (4.09)
Synchronous Dust-Resistant
Motors
104 (4.09) 48.5 (0.335) Thru 66 (2.60)
Watertight,
Use cable with a diameter of 812 mm (0.310.47 in.).
Motors
Details of terminal box Page A-314
Motors
Torque
(0.236200.0012)
60.03
Right-Angle
0
Gearheads
0 18.50.1
320.2 60.03
(1.2600.008) (0.72800.004)
(0.23620.0012
0
)
Enter the gear ratio in the box () within the model name.
Characteristics A-145 / Dimensions A-146 / Connection Diagrams A-150 / Motor and Gearhead Combinations A-151 A-147
Standard AC Motors
24 (0.94)
6W
0
180.018
58 (2.28)
33.50.5 (0.708700.0007)
(1.320.02) 25 48.5
42 (0.81)
20.5
(0.98) (0.335) Thru
(1/50 HP)
15 W
(1.65)
103 (4.06)
104 (4.09)
20 (0.79)
(1/30 HP)
25 W
0.5
120 0.02)
(4.72
)
0.5710.004
0
(1/8 HP)
0
14.50.1
90 W
0
60.03
0
250.2 60.03
0
(0.9840.008) (0.23620.0012)
(
0
(1/4 HP)
200 W
58 (2.28)
140.018
0
30
(3.700800.0014)
103 (4.06)
(1.18)
104 (4.09)
940.035
0
0 .5
120 0.02)
2
(4.7
Enter the gear ratio in the box () within the model name.
B+15 (0.59)
BHI62FMT-RH
B
BHI62FMT-RA 58 41 58 175
CH400CFAUL2
BHI62FMT- (2.28) (1.61) (2.28) (6.2)
4.3
(0.28)
20 BHI62FMT-A
7
(0.169) ( Included
0.79) BHI62EMT-RH
Introduction
BHI62EMT-RA 58 35 50 132
CH100BFAUL
(0.39)
AMP#187 6 (0.24) BHI62EMT- (2.28) (1.38) (1.97) (4.7)
10
BHI62EMT-A
Enter the gear ratio in the box () within the model name.
R
(R 10
Induction
C 0.3
Motors
(0.16) 9)
4
Reversible
Motors
Mounting Method for Right-Angle, Hollow Shaft Type
Inner Diameter of Hollow Shaft and Recommended Load
Brake Motors
These figures below show how to mount loads depending on the
magnetic
Electro-
shape of the shaft. The tolerance of the inner diameter for the hollow Shaft Diameter Unit = mm (in.)
shaft is finished as shown in the table on the right, and "key slot"
Model BH6G2-RH
processing is given to mount the load shaft. Use the key provided + 0.033
Inner Diameter of Hollow Shaft H8 25 0 (0.9843+ 0.0013
0 )
with the product by fastening it to the shaft. Apply a coating of
25
V Series
0 0
Recommended Load Shaft Diameter h7 0.021 (0.9843 0.0008 )
molybdenum disulfide or similar grease to the surface of the load
Enter the gear ratio in the box () within the model name.
shaft and to the inner diameter of the load shaft to prevent sticking.
Recommended load shaft diameter and inner diameter of hollow
shaft are shown in the table on the right.
Clutch &
Motors
Brake
Stepped Load Shaft Straight Load Shaft
Hollow Shaft Spacer Hollow Shaft Spacer
Synchronous Low-Speed
Load Shaft Load Shaft Flat Washer
Motors
Flat Washer Bolt
Bolt
Synchronous Dust-Resistant
Spring Washer
Motors
Spring Washer Retaining Ring for Hole
Retaining Ring for Hole Spacer
Watertight,
Motors
Notes:
Be careful not to apply a shock to the hollow shaft when mounting a load shaft. It may damage the bearing inside the gearhead.
Bolts or other fasteners used to install the load shaft are not included. These parts must be purchased separately.
Motors
Torque
Right-Angle
Gearheads
Heads
Linear
Brake Pack
Accessories
Installation
Characteristics A-145 / Dimensions A-146 / Connection Diagrams A-150 / Motor and Gearhead Combinations A-151 A-149
Standard AC Motors
Connection Diagrams
The direction of motor rotation is as viewed from the shaft end of the motor. CW indicates clockwise direction, while CCW counterclockwise
direction.
Enter the voltage (F, E or S) in the box () within the model name.
Motor Type Single-Phase Motor Three-Phase Motor
CCW CW CW
Clockwise
R0 C0 R0 C0
(1/125 HP)
6W
N B B
15 W
BHI62MT-A ON
SW1 B B
ON Electromagnetic Electromagnetic
SW1
Brake Brake
R0 C0 PE PE
Capacitor R0 C0
(1/30 HP)
CCW CW CW
25 W
Clockwise
R0 C0 R0 C0
U2 L2(R) V
40 W
Motor Motor
Combination Type: Right Angle Shaft R0 C0 U1 R0 C0 W
L3(T)
BHI62MT-5180RA N B B
ON
BHI62MT-5180RH SW1
ON
B B
Electromagnetic SW1 Electromagnetic
(1/12 HP)
Brake Brake
60 W
R0 C0 PE PE
Capacitor R0 C0
Rotation Direction
90 W
The electromagnetic brake will be released and the motor will rotate when SW1 is switched simultaneously to ON.
When SW1 is switched simultaneously to OFF, the motor stops immediately with the electromagnetic brake and holds the load.
Specications
Switch
Single-Phase Single-Phase Note
No. Three-Phase 200/220/230 VAC Input
110/115 VAC Input 220/230 VAC Input
SW1 125 VAC 5 A minimum 250 VAC 5 A minimum 250 VAC 5 A minimum (Inductive Load) Switched Simultaneously
SW2 (Inductive Load) (Inductive Load)
Connect a CR circuit (R0 C0) for surge suppression shown on the diagrams to protect the contact.
R0=5200 C0=0.10.2 F 200 WV
EPCR1201-2 (CR circuit) is available as an accessory.
Note:
Change the direction of single-phase motor rotation only after bringing the motor to a stop. If an attempt is made to change the direction of
rotation while the motor is rotating, motor may ignore reversing command or change its direction of rotation after some delay.
Introduction
BHI62EMT-G2 BHI62SMT- BHI62SMT-G2
BHI62EMT-RA BH6G2-RA
Enter the gear ratio in the box () within the model name.
BHI62SMT-RH BH6G2-RH
BHI62SMT-G2
BHI62SMT-RA BH6G2-RA
Enter the gear ratio in the box () within the model name.
Induction
Motors
Accessories
Reversible
Accessories
Motors
Page A-287
Brake Motors
magnetic
Electro-
V Series
Clutch &
Motors
Brake
Synchronous Low-Speed
Motors Synchronous Dust-Resistant
Motors
Watertight,
Motors
Motors
Torque
Right-Angle
Gearheads
Heads
Linear
Brake Pack
Accessories
Installation
Characteristics A-145 / Dimensions A-146 / Connection Diagrams A-150 / Motor and Gearhead Combinations A-151 A-151
Standard AC Motors