Professional Documents
Culture Documents
100 Base-TX (Fast Ethernet) surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without
LEDS Integrated Magnetics Connector, designed to support applications such as: Set Top Box and
Network Interface Cars (NIC).
Features and Benefits:
RoHS peak wave reflow temperature rating 245C
J0C SMT product, reduced size and low cost alternative
SMT Contacts to JV series
JV0 Meets IEEE 802.3 specification
High performance for maximum EMI suppression
Minimum 1500Vrms isolation per IEEE 802.3 requirement
J0C
J30
Electrical Specifications @ 25C - Operating Temperature 0C to +70C
Insertion Return Loss Common Mode
Turns Tab Crosstalk Hipot
RoHS Loss (dB MIN) Rejection
Option LEDs BST EMI
1
Ratios (dB MIN) (Vrms MIN)
Compliant Finger (dB MAX) 100 (15) (dB MIN)
Up/Down L/R Circuit
Part No.
1-65 1-10 30 60-80 1-10 30-60 60-100 1-50 50-130 @ 60 Hz
TX RX MHz MHz MHz MHz MHz MHz MHz MHz MHz 1 MIN
J0C-0003NL 1CT:1 1CT:1 Down No No No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0004NL 1CT:1 1CT:1 Down No No Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0005NL 1CT:1 1CT:1 Down No Yes No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0006NL 1CT:1 1CT:1 Down No Yes Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
JV006I21NL 1CT:1 1CT:1 Down No No Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
JV011I21NL 1CT:1 1CT:1 Down No Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
JV026I21NL 1CTS:1 1CT:1 Down No Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3011G21DNL 1CT:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3026G01DNL 1CTS:1 1CT:1 Up G/Y Yes No -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3026G21DNL 1CTS:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
3
JX30-0005NL 1CT:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
Notes:
1. LEDs Left/Right:
3 G = green; Y = yellow.
2. Add suffix T for Tape & Reel option (e.g. J0C-0004T).
3. Extended Temperature: -40 to 85 C
USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768
CT 4 CT 4
75
TD- 2 1:1
2 TX- TD- 2 2 TX-
1:1
PCB SIDE TO PHY
PCB SIDE TO PHY
TRANSMIT TRANSMIT
CABLE SIDE
CABLE SIDE
RD+ 3 3 RX+ RD+ 3 3 RX+
CT 5 CT 5
75
RD- 6 6 RX- RD- 6 6 RX-
1:1
RECEIVE 1:1
4 RECEIVE 4
NC 7 5 NC 7 5
75
7 7
GND* 8 8 GND 8 8
75
NOTE: Connect GND to PCB ground.
CT 1 CT 1
TRANSMIT
CABLE
CABLE
CT 6 CT 6
RD- 5 6 RX-
RD- 5 1:1
6 RX- 1:1
RECEIVE
RECEIVE 4
4
75 75
5
5 75
75
7
7 0.001 75
8
8 C1
SHIELD
JV026
TD+ 2 1 TX+
CT 1
TD- 3 2 TX-
1:1
PCB SIDE TO PHY
TRANSMIT
RD+ 4 3 RX+
CABLE
CT 6
RD- 5 1:1
6 RX-
RECEIVE
75
4
5
75
75
7
0.001
8
C1 75
SHIELD
J3 Platform Schematics
J3011 J3026
1 TX+ TD+ 3 1 TX+
TD+ 3
CT 5
CT 5
TRANSMIT
CABLE
CABLE
CT 6 CT 6
6 RX-
RD- 8 1:1
6 RX- RD- 8 1:1
RECEIVE RECEIVE
4 4
75 75 75 75
9 5 N/C 9 5
75 75
7 7
0.001 0.001 75
75
10 8 10 8
C1
JX30-0005NL
TD+ 3 1 TX+
5 CT1
TD- 4 2 TX-
1:1
TRANSMIT
PCB SIDE TO PHY
RD+ 7 3 RX+
CABLE
6 CT2
RD- 8
1:1
6 RX-
RECEIVE
4
75 75 75
5
9
7
0.001 75
10 8
CT1
EMI Fingers
EMI Fingers
JV0XX121
Date Code
Country of Origin
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are .010
0,25
J3 Platform Mechanical
J3 Series
JX30-0005NL
& J3026G21D
J30XXGX1D J30-0005NL
Date of Code With EMI J3026G21D
Country of Origin
Tabs Date of Code
Country of Origin
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are .010
0,25
The JC0 series meets the stringent open circuit Note: Modules are packaged in trays, unless Tape & Reel
inductance requirements imposed by IEEE. When an 8mA is specified (ex: J0C-0003NL for Trays and J0C-0003NLT
DC current is applied across the transformer windings, the for Tape & Reel).
transformer will provide at least 350H. The transformers
J0C-0003NL/04NL Connector
1. For maximum EMI suppression (electromagnetic interference) 3. Connections between the 10/100 IC and the
place the decoupling capacitors adjacent to VCC and 50 SMT connector should be direct (ideally no change
connections. in direction) and of minimum length.
2. Connections to ground should be as short as possible.
JV Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector isolation, wide bandwidth with minimal attentuation and
Magnetics Modules has been specifically designed for fast rise times to minimize system level jitter.
the implementation of a 10Base-T and 100Base-TX
transmission over data-grade unshielded twisted pair The 1X1 SMT RJ45 connectors manufactured by Pulse
cable (UTP-3, 5e and 6). are designed to meet all published specifications after
exposure to surface mount soldering temperatures.
The connectors provide excellent EMI filtering and are The SMT are robust enough to withstand convection
suitable for adapter card and multiport applications. Pulse and infrared reflow solder temperatures. Additionally,
has worked closely with the leading IC manufacturers compliant leads provide excellent solder-joint reliability
in providing these 10/100 solutions, thereby assuring with a coplanarity of 0.10 (0.004).
compatibility with each transceiver.
Note: Modules are packaged in trays, unless Tape & Reel is
The JC0 series meets the stringent open circuit specified. Please add the suffix T for Tape & Reel orders
inductance requirements imposed by IEEE. When an 8mA (ex: JVO006121T). Add the suffix NL for RoHS compliant
DC current is applied across the transformer windings, the parts (ex: JV006I21NLT for Trays and JV006I21NLT for
transformer will provide at least 350H. The transformers Tape & Reel).
used in each module also provide 1500Vrms minimum
JV006I21 Connector
1. For maximum EMI suppression (electromagnetic interference) 3. Connections between the 10/100 IC and the
place the decoupling capacitors adjacent to VCC and 50 SMT connector should be direct (ideally no change
connections. in direction) and of minimum length.
2. Connections to ground should be as short as possible.
Tray Specification
Tray Specification
Tray Specification
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. Copyright, 2013. Pulse Electronics, Inc. All rights reserved.