Professional Documents
Culture Documents
mkumarsaravana@gmail.com
Unit 2 - Week 1
Course
outline Week1 Assignment
Due date for this assignment: 2017-08-02, 23:59 IST.
How to access
1) What is the unit of shear stress? 1 point
the portal
N/m3
Week 1
N/m2
Lecture 1: N/m
Introduction
N.m
Lecture 2:
Analysis of
2) What is the unit of shear strain? 1 point
Stress- I
No unit
Lecture 3: m
Analysis of
Stress- II m-1
Quiz : Week1 m2
Assignment
3) What is the unit of Youngs Modulus? 1 point
N/mm2
N/m2
Pa
All of the above
4) A uniform steel rod, 6mm in diameter and 0.5m long is subjected to a tensile force of 1 point
3kN. Find the stress in the bar and its elongation. (E=200 GPa)
https://onlinecourses.nptel.ac.in/noc17_ce22/unit?unit=5&assessment=14 1/3
7/27/2017 Strength of Materials - - Unit 2 - Week 1
79.57 MPa
39.7 Pa
79.57 Pa
39.8 MPa
7) Find the bearing stress between the bolts and the plates. The thickness of each plate 1 point
is 10 mm. P= 25 kN, diameter of the rivets= 20 mm.
62.5 MPa
125 MPa
62500 Pa
125000 Pa
8) Determine the resis ng shear stress in the rivets. P= 30 kN, diameter of rivets = 1 point
20 mm.
190.9 MPa
47.7 MPa
95.5 MPa
23.8 MPa
https://onlinecourses.nptel.ac.in/noc17_ce22/unit?unit=5&assessment=14 2/3
7/27/2017 Strength of Materials - - Unit 2 - Week 1
9) The state of stress at a given point is given as following. Calculate the principal 1 point
stresses.
Zero
Maximum
Minimum
Either maximum or minimum
You may submit any number of times before the due date. The final submission will be
considered for grading.
Submit Answers
Funded by
Powered by
https://onlinecourses.nptel.ac.in/noc17_ce22/unit?unit=5&assessment=14 3/3