Professional Documents
Culture Documents
Please Note: The Ubiquiti NanoStation Loco 2 has been discontinued. For an alternative, we
recommend the Ubiquiti NanoStation M2 MIMO, Point-to-Point Wireless Bridge/Base Station or
the Ubiquiti NanoStation M5 MIMO, Point-to-Point Wireless Bridge/Base Station.
The Ubiquiti NanoStations are not 802.3af compliant. You will require a Ubiquiti Instant 802.3af
outdoor Adapter. This allows you to power your device on an 802.3af compliant POE switch.
Alternatively, use the supplied Ubiquiti PoE-24 POE Adapter with our optional mains cable to
power from a mains point or a suitable Ubiquiti tough switch.
The Ubiquiti NanoStation Loco 2 provides a breakthrough in cost, reliability, & performance
featuring up to 10km of range performance, 25+Mbps of throughput performance, & the
powerful, intuitive AirOS from Ubiquiti.
Although approximately half the design of the original Ubiquiti NanoStation, The NanoStation
Loco 2 still exhibits outstanding antenna performance. Please visit the Ubiquiti Firmware page for
the latest Firmware upgrades
Ubiquiti NanoStation 2 Loco Technical Specifications
Hardware
Tx Power Specifications
802.11b
1Mbps @ 20dBm
2Mbps @ 20dBm
5.5Mbps @ 20dBm
11Mbps @ 20dBm
802.11g OFDM
6Mbps @ 20dBm
9Mbps @ 20dBm
12Mbps @ 20dBm
18Mbps @ 20dBm
24Mbps @ 20dBm
36Mbps @ 18dBm
48Mbps @ 16dBm
54Mbps @ 15dBm
Rx Sensitivity Specifications
802.11b
1Mbps @ -95dBm
2Mbps @ -94dBm
5.5Mbps @ -93dBm
11Mbps @ -90dBm
802.11g OFDM
6Mbps @ -92dBm
9Mbps @ -91dBm
12Mbps @ -89dBm
18Mbps @ -88dBm
24Mbps @ -84dBm
36Mbps @ -81dBm
48Mbps @ -75dBm
54Mbps @ -72dBm
Range
Antenna
Power
Physical
Standards Compliance
Please Enquire
Options available for Ubiquiti NanoStation Loco 2 Point-to-Point Wireless Bridge/Base Station :