You are on page 1of 2

DIGIX-2-1-0-24VDC Programmable Logic Controller

Features :
! Compact PLC with built in HMI
! 2 line 8 character LCD
! Analog Input Available
! Windows based user friendly software for ladder programming &
HMI configuration
! RS485 based communication with MODBUS protocol

Size: 70 x 90 x 66.4mm

Technical Specifications
Display Communication
Display 2 line X 8 characters LCD (Green backlight) Communication Port RS485 [Slave]
No. of keys 5 keys (4 - User configurable) RS485 [Master]
Commzzunication Protocol MODBUS RTU
Input Specifications Connector RJ25
Digital Input
Digital inputs 10 + 2(AI configurable as DI & AI) Functional Specifications
Input Type PNP Programming Method Windows based software for ladder
Input Voltage Range 5 - 30V DC programming and HMI configuration.
Response Time Typical 2 mSec (Based on ladder scan time) Memory Data memory : 32 kB
100 sec for fast Input Code memory : 240 kB
Isolation between EEPROM Memory : 1 kB
Power supply & Inputs Yes Max. no. of Objects 2000 (As per memory)
Isolation between Minimum Scan Time 200 Sec
Inputs & MCU No Typical Scan Time 2 mSec (Based on ladder scan time)
Debounce Time 0 to 255 mSec (Default 10 mSec)
Timer Accuracy 0.1% or 2 mSec (Whichever is greater)
Environmental Specifications
Analog Input Operating Temperature 0 to 55 OC
No of Channels 2 (AI0 & AI1) (Configurable as Digital input also) Storage Temperature -40 to 70 OC
Input type 0 to10V DC Humidity (non-condensing) 10% to 95% RH
Accuracy at 25 OC 0.5% or 5mV.
Resolution 12 Bit
Mechanical Specifications
Conversion time 100 mSec.
Mounting Din Rail
Input Impedence 330 kOhms
Weight Approx 320 gms.
Destructive Input 20V
Isolation between channels No
Polarity protection Yes Functional Features
Timer Operational Modes On Delay, Off Delay, Pulse,
Fast Counter Input Special [Up/Down] Timer
Fast Inputs 1 Timer Resolution 1 ms (Accurate only for 1 msec Timer block)
Frequency 5kHz Counter Up Counter, Down Counter,
Up/Down Counter, Special [Up/Down] Counter
Other Blocks Analog input, FTC, PID, Ramp Soak
Memory Retention 10 years
Output Specifications RTC No
Digital Output - Relay Clock Data Retention NA
Digital Outputs 8 (NO type with 4 COM points) Clock Drift NA
Contact Rating 5A @ 240V AC (Resistive)
5A @ 28V DC (Resistive) Supply Specification
Response Time 10 mSec Supply Voltage 24V DC (20 %)
Mechanical life 2000000 Cycles Power Consumption 4W
Isolation No

www.selec.com 1
DIGIX-2-1-0-24VDC Programmable Logic Controller

Dimensions (All dimensions are in mm)


Ordering Information
Order Code Description
44
70
Digix-2-1-0-24V 10+2 Inputs, 8 Outputs, RS485 Master, 24V Supply
90

45
B

Downloading Cable AC-USB-RS485-03

ACH-004 (RJ25 Cable)

62
Networking AC-IOEXP-03 (Expansion Adaptor)

AC-USB-RS485-02 (USB to RS485 Cable)

Terminal Connections
RS485 MSTR

+
NO0 DI11/AI1
RS485 SLV

+
NO1 DI10/AI0
C0 DI9
NO2 DI8
NO3 DI7
C1 DI6
NO4 DI5
NO5 DI4
C2 DI3
0V

NO6 DI2
24VDC

NO7 DI1
FC0
24V

C3 DI0

www.selec.com 2

You might also like