You are on page 1of 126

Huawei Certification Exam Outline (Partner)

Huawei Certification Exam Outline


(For Partner)

HUAWEI Learning Service


2013

COMMERCIAL IN CONFIDENCE 1
Huawei Certification Exam Outline (Partner)

Contents

1 Fixed Network ............................................................................................................................................ 4


1.1 Datacom Technology Certification Exam (Carrier) Outline ......................................................................... 4
1.1.1 Introduction of Datacom Technology Certification Exam .................................................................. 4
1.1.2 Huawei Certified Datacom Associate Huawei Networking Technology and Device
(HCDA-HNTD) Exam Outline ..................................................................................................................... 5
1.1.3 Huawei Certified Datacom ProfessionalBuilding Carrier Access Network (HCDP-BCAN) Exam
Outline 7
1.1.4 Huawei Certified Datacom Professional - Building Carrier Routing Network (HCDP-BCRN) Exam
Outline 9
1.1.5 Huawei Certified Datacom Professional-Building IP Telecom Network (HCDP-BITN) Exam Outline12
1.1.6 Huawei Certified Internetwork Expert Improve Carrier Network Performance (HCIE Carrier) Exam
Outline 14
1.2 Access Network Exam Outline ................................................................................................................. 18
1.2.1 Introduction of Access Network Exam ........................................................................................... 18
1.2.2 Huawei Certified Network Associate- Access Network Exam Outline ............................................ 18
1.2.3 Huawei Certified Network Professional- Access Network Exam Outline........................................ 20
1.3 Optical Network Exam Outline .................................................................................................................. 23
1.3.1 Introduction of Optical Network Exam ............................................................................................ 23
1.3.2 Huawei Certified Network Associate-Optical Network Exam Outline ............................................. 23
1.3.3 Huawei Certified Network Professional-Optical Network Exam Outline ......................................... 25
1.4 Microwave Product Exam Outline ............................................................................................................ 28
1.4.1 Introduction of Microwave Product Exam ...................................................................................... 28
1.4.2 Huawei Certified Network Associate-Microwave Product Exam Outline ........................................ 28
1.4.3 Huawei Certified Network Professional-Microwave Product Exam Outline .................................... 29
2 Core Network ........................................................................................................................................... 32
2.1 Mobile Soft Switch Exam Outline ............................................................................................................. 32
2.1.1 Introduction of Mobile Soft Switch Exam Outline ........................................................................... 32
2.1.2 Huawei Certified Network Associate- Mobile Soft Switch Exam Outline ........................................ 32
2.1.3 Huawei Certified Network Professional - Mobile Soft Switch Exam Outline ................................... 34
2.2 NGN Exam Outline ................................................................................................................................... 36
2.2.1 Introduction of NGN Exam Outline................................................................................................. 36
2.2.2 Huawei Certified Network Associate-NGN Exam Outline .............................................................. 36
2.2.3 Huawei Certified Network Professional-NGN Exam Outline .......................................................... 38
2.3 MGW&SBC Exam Outline ........................................................................................................................ 41
2.3.1 Introduction of MGW&SBC Exam Outline ...................................................................................... 41
2.3.2 Huawei Certified Network Associate- MGW&SBC Exam Outline................................................... 41
2.4 USC Exam Outline ................................................................................................................................... 43
2.4.1 Introduction of USC Exam Outline ................................................................................................. 43
2.4.2 Huawei Certified Network Associate-USC Exam Outline ............................................................... 43
2.4.3 Huawei Certified Network Professional -USC Exam Outline ......................................................... 46
2.5 SG Exam Outline ...................................................................................................................................... 49
2.5.1 Introduction of SG Exam Outline ................................................................................................... 49
2.5.2 Huawei Certified Network Associate-SG Exam Outline ................................................................. 49

1
Huawei Certification Exam Outline (Partner)

2.5.3 Huawei Certified Network Professional-SG Exam Outline ............................................................. 50


3 Wireless.................................................................................................................................................... 52
3.1 GSM Exam Outline ................................................................................................................................... 52
3.1.1 Introduction of GSM Exam Outline ................................................................................................ 52
3.1.2 Huawei Certified Network Associate-GSM Exam Outline .............................................................. 52
3.1.3 Huawei Certified Network Professional-GSM Exam Outline .......................................................... 54
3.2 WCDMA Exam Outline ............................................................................................................................. 57
3.2.1 Introduction of WCDMA Exam Outline ........................................................................................... 57
3.2.2 Huawei Certified Network Associate-WCDMA Exam Outline ......................................................... 57
3.2.3 Huawei Certified Network Professional-WCDMA Exam Outline .................................................... 59
3.3 CDMA Exam Outline................................................................................................................................. 62
3.3.1 Introduction of CDMA Exam Outline .............................................................................................. 62
3.3.2 Huawei Certified Network Associate-CDMA Exam Outline ............................................................ 62
3.3.3 Huawei Certified Network Professional-CDMA Exam Outline ........................................................ 64
3.4 Wimax Exam Outline ................................................................................................................................ 68
3.4.1 Introduction of Wimax Exam Outline .............................................................................................. 68
3.4.2 Huawei Certified Network Professional-Wimax Exam Outline ....................................................... 68
3.5 LTE Certification Exam Outline ................................................................................................................. 70
3.5.1 Introduction of LTE Certification ..................................................................................................... 70
3.5.2 Huawei Certified Network Associate LTE (HCNA-LTE) Exam Outline ....................................... 70
3.5.3 Huawei Certified Network Professional LTE (HCNP-LTE) Exam Outline .................................. 72
3.5.4 Huawei Certified Network Professional EPC (HCNP-EPC) Exam Outline ................................ 76
4 RNP&RNO ............................................................................................................................................... 79
4.1 GSM RNP&RNO Exam Outline ................................................................................................................ 79
4.1.1 Introduction of GSM RNP&RNO Exam Outline.............................................................................. 79
4.1.2 Huawei Certified Network Associate-GSM RNP&RNO Exam Outline ........................................... 79
4.1.3 Huawei Certified Network Professional-GSM RNP&RNO Exam Outline ....................................... 80
4.2 WCDMA RNP&RNO Exam Outline .......................................................................................................... 83
4.2.1 Introduction of WCDMA RNP&RNO Exam Outline ........................................................................ 83
4.2.2 Huawei Certified Network Associate-WCDMA RNP&RNO Exam Outline ...................................... 83
4.2.3 Huawei Certified Network Professional-WCDMA RNP&RNO Exam Outline ................................. 84
4.3 CDMA RNP&RNO Exam Outline .............................................................................................................. 87
4.3.1 Introduction of CDMA RNP&RNO Exam Outline ........................................................................... 87
4.3.2 Huawei Certified Network Associate-CDMA RNP&RNO Exam Outline ......................................... 87
4.3.3 Huawei Certified Network Professional-CDMA RNP&RNO Exam Outline ..................................... 88
4.4 Microwave RNP Exam Outline ................................................................................................................. 91
4.4.1 Introduction of RNP Exam Outline ................................................................................................. 91
4.4.2 Huawei Certified Network Associate-Microwave RNP Exam Outline ............................................. 91
4.4.3 Huawei Certified Network Professional-Microwave RNP Exam Outline ........................................ 92
5 Energy&Infrastructure............................................................................................................................... 95
5.1 Site and Power Exam Outline ................................................................................................................... 95
5.1.1 Introduction of Site and Power Exam Outline ................................................................................ 95
5.1.2 Huawei Certified Network Associate-Site and Power Exam Outline .............................................. 95
5.2 Hybrid Power Supply Exam Outline.......................................................................................................... 97
5.2.1 Introduction of Hybrid Power Supply Exam Outline ....................................................................... 97

2
Huawei Certification Exam Outline (Partner)

5.2.2 Huawei Certified Network Associate-Hybrid Power Supply Exam Outline ..................................... 97
6 Cloud ........................................................................................................................................................ 99
6.1 Cloud Computing Certification Exam Outline ........................................................................................... 99
6.1.1 Introduction of Cloud Computing Certification................................................................................ 99
6.1.2 Huawei Certified Network Associate-Huawei Cloud Technologies and Device (HCNA-HCTD) Exam
Outline 99
7 Telecom Design and Implementation...................................................................................................... 102
7.1 Telecom Survey and Design Exam Outline ............................................................................................ 102
7.1.1 Introduction of Telecom Survey and Design Exam Outline .......................................................... 102
7.1.2 Huawei Certified Network Associate-Telecom Survey and Design Exam Outline ........................ 102
7.2 Hardware Installation Supervision (excluding RF products) ................................................................... 104
7.2.1 Introduction of Enterprise Communiation Exam Outline .............................................................. 104
7.2.2 Huawei Certified Network Associate-Hardware Installation Supervision (excluding RF products)104
7.3 Huawei Certified Network Professional -Hardware Installation Supervision (including RF products) ..... 107
7.3.1 Introduction of Enterprise Communiation Exam Outline .............................................................. 107
7.3.2 Huawei Certified Network Professional-Hardware Installation Supervision (including RF products)107
7.4 Huawei Certified-ODN Design Exam Outline ......................................................................................... 109
7.4.1 ODN Design Certification Exam Introduction ............................................................................... 109
7.4.2 ODN Design Exam Outline .......................................................................................................... 109
7.5 Huawei Certified-ODN Implementation Exam Outline ............................................................................ 111
7.5.1 ODN Implementation Certification Exam Introduction .................................................................. 111
7.5.2 ODN Implementation Exam Outline ............................................................................................. 112
7.6 Huawei Certified-OSP Design Exam Outline .......................................................................................... 114
7.6.1 OSP Design Exam Introduction ................................................................................................... 114
7.6.2 OSP Design Exam Exam Outline ................................................................................................ 114
7.7 Huawei Certified-OSP Implementation Exam Outline............................................................................. 116
7.7.1 OSP Implementation Exam Introduction ...................................................................................... 116
7.7.2 OSP Implementation Exam Outline ............................................................................................. 117
7.8 Huawei Certified-Site Civil Work Implementation Exam Outline ............................................................. 119
7.8.1 Site Civil Work Implementation Exam Introduction ...................................................................... 119
7.8.2 Site Civil Work Implementation Exam Outline.............................................................................. 119
7.9 Huawei Certified-Site Design Exam Outline ........................................................................................... 120
7.9.1 Site Design Certification Exam Introduction ................................................................................. 120
7.9.2 Site Design Exam Outline ............................................................................................................ 121
8 Service Delivery flow and Skill ................................................................................................................ 123
8.1 Maintenance flow and Skill(for MS area Manager and Field Maintenance Leader) ................................ 123
8.1.1 HCNA- Maintenance flow and Skill subcontractor test................................................................. 123
8.1.2 HCNA- Maintenance flow and Skill Exam Outline........................................................................ 123
8.2 Training flow and Skill ............................................................................................................................. 124
8.2.1 HCNA- Maintenance flow and Skill subcontractor test introduction ............................................. 124
8.2.2 HCNA- Maintenance flow and Skill Exam Outline........................................................................ 124

3
Huawei Certification Exam Outline (Partner)

1 Fixed Network
1.1 Datacom Technology Certification Exam (Carrier)
Outline

1.1.1 Introduction of Datacom Technology Certification Exam

Exam Total Pass


Certificate Exam Name Exam Code Exam Name Item number
Duration Score Score

HCDA-HNTD 60
(Huawei Certified multiple-choice
Huawei Datacom Associate questions
Certified HCDA (single-answer
HC-211-ENU/HC-031-211-ENU Huawei 90 min 1000 600
Datacom HNTD and
Associate Networking multiple-answer),
Technology and true-false
Device) questions
60
HCDP-BCAN multiple-choice
(Huawei Certified questions
Datacom Professional (single-answer
HCDP-BCAN HC-121-ENU/HC-031-121-ENU 90 min 1000 600
and
Building Carrier
multiple-answer),
Access Network) true-false
questions
60
multiple-choice
Huawei HCDP-BCRN
questions
Certified (Huawei Certified
(single-answer
Datacom HCDP-BCRN HC-122-ENU/HC-031-122-ENU Datacom Professional 90 min 1000 600
and
Professional - - Building Carrier
multiple-answer),
Carrier Routing Network)
true-false
questions
60
multiple-choice
HCDP-BITN
questions
(Huawei Certified
(single-answer
HCDP-BITN HC-123-ENU/HC-031-123-ENU Datacom 90 min 1000 600
and
Professional-Building
multiple-answer),
IP Telecom Network)
true-false
questions
60
multiple-choice
HCIE (Huawei
questions
Certified Internetwork
(single-answer
Huawei HCIE-Carrier HC-031-161-ENU Expert Improve 90 min 1000 600
and
Certified Carrier Network
multiple-answer),
Internetwork Performance ) Exam
true-false
Expert - Carrier questions
Huawei Certified
HCIE Carrier 480
-- Internetwork Expert - -- -- --
Lab Exam minutes
Lab Exam

4
Huawei Certification Exam Outline (Partner)

1.1.2 Huawei Certified Datacom Associate Huawei

Networking Technology and Device (HCDA-HNTD) Exam


Outline

1.1.2.1 Prerequisites

No prerequisites.

1.1.2.2 Exam Content Overview

The HCDA-HNTD exam covers datacom basics, TCP/IP protocol stack basics, WAN
protocol principles such as Frame Relay and PPP and their implementation in Huawei
routers, Ethernet technology, STP, and VLAN principles and their implementation in Huawei
switches, basic principles of routing protocols such as RIP and OSPF and their
implementation in Huawei routers, and network security technologies and their
implementation in Huawei firewalls.

1.1.2.3 Exam results valid period

This exam result is valid for 3 years.

1.1.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
Huawei Certified
technology
Datacom Associate Pass any subject of the high-level certification in the field of the local
technology

1.1.2.5 Key Points of Exam

IP Network Basics
1. Datacom basics
2. Basic network concepts, IP network architecture, standardization organizations and
protocols
3. OSI and TCP/IP protocol models, functions at each layer, and packet encapsulation
4. ARP and RARP principles
5. TCP/UDP principles
6. IPv4 subnetting
7. Principles of common application layer protocols
8. Principles and application of common tools such as Ping, Tracert, FTP, and Telnet

5
Huawei Certification Exam Outline (Partner)

LAN Technologies
1. Basic principles of the Ethernet technology and switches
2. Basic principles of VLAN, STP, and VRRP and their implementation in VRP
3. How a small switching network is constructed by using VLAN, STP, and VRRP
technologies and Huawei switches

WAN Technologies
1. HDLC, PPP, and Frame Relay and their implementation in Huawei products

Routing Technologies
1. Static routing protocol principles, RIP principles, and OSPF principles, and their
implementation in VRP
2. How a small routing network is constructed by using routing technologies and Huawei
routers

Network Security
1. Firewall functions, types, and working principles
2. ACL and NAT principles and configuration of ACL and NAT in Huawei firewalls
3. How network security is ensured by using network security technologies and firewalls

Product Knowledge
1. VRP features, operations, and maintenance
2. Features of Huawei routers and switches and their implementation in IP networks

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

1.1.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :

http://www.vue.com/vtclocator/

1.1.2.7 References

Huawei Certified Datacom Training Courses HCDA: Huawei Network Technology and
Device (HNTD)
Huawei Certified Datacom Training Courses HCDA: Guide to Experiments on Huawei
Network Technology and Device (HNTD)
VRP Configuration Guide

6
Huawei Certification Exam Outline (Partner)

Huawei product manuals

1.1.2.8 Recommended Training Program

BOM Training Program Level Duration

HCDA-HNTD (Huawei Certified Datacom Associate-Huawei Networking


88980225 II 8
Technologies and Device) Training

1.1.3 Huawei Certified Datacom ProfessionalBuilding Carrier

Access Network (HCDP-BCAN) Exam Outline

1.1.3.1 Prerequisites

No prerequisites.

1.1.3.2 Exam Content Overview

The HCDP-BCAN exam covers the Ethernet and Ethernet HA technology, VLAN
technology, QinQ technology, STP/RSTP/MSTP technologies, PPP and PPPoE access
technologies, AAA technology, Huawei switches, and broadband access servers.

1.1.3.3 Exam results valid period

This exam result is valid for 3 years.

1.1.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Huawei Certified Pass any subject of the same level of certification in the field of the local
Datacom technology
Professional-Carrier Pass any subject of the high-level certification in the field of the local
technology

1.1.3.5 Key Points of Exam

Ethernet Technology
1. Ethernet evolution process, port auto-negotiation technology, port trunking, port
mirroring, working principles of a Layer 2 switch, and working principles of a Layer 3
switch

VLAN
1. 802.1Q encapsulation, implementation of VLAN in Huawei products
2. Inter-VLAN route and Super VLAN

7
Huawei Certification Exam Outline (Partner)

3. QinQ principles, configuration, and implementation

STP/RSTP/MSTP
1. STP principles and configuration
2. RSTP principles and configuration
3. MSTP principles and configuration

Huawei Switches
1. Hardware structure and working principles of Huawei switches
2. VRP software features of Huawei switches

Huawei ME60-X Series Broadband Access Servers


1. ME60-X series products hardware structure and working principle
2. ME60-X series products VRP software feature

Basic Access and Authentication Techniques


1. IPoE, IPoEoVLAN, IPoEoA, and static user access principles and their implementation
in Huawei BRAS; Web authentication, fast authentication, and binding authentication
principles and their implementation in the MA5200G
2. PPPoE, PPPoEoVLAN, PPPoEoA, and PPPoA access methods and their
implementation in Huawei BRAS
3. RADIUS principles and its implementation in Huawei BRAS

Ethernet HA technology
1. Ethernet link aggregation working princple and configuration
2. Smart link and monitor link working princple and configuration
3. VRRP working princple and configuration

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

1.1.3.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

1.1.3.7 References

Huawei Certified Datacom Training Courses HCDP-Carrier IP: Building Carrier Access
Network (BCAN)
Huawei Certified Datacom Training Courses HCDP-Carrier IP: Guide to Experiments on

8
Huawei Certification Exam Outline (Partner)

Building Carrier Access Network (BCAN)


VRP Configuration Guide
VRP Troubleshooting
VPR Feature Description

1.1.3.8 Recommended Training Program

BOM Training Program Level Duration

88980226
HCDP-BCAN (Huawei Certified Datacom ProfessionalBuilding III 6
Carrier Access Network) Training.

1.1.4 Huawei Certified Datacom Professional - Building Carrier


Routing Network (HCDP-BCRN) Exam Outline

1.1.4.1 Prerequisites

No prerequisites.

1.1.4.2 Exam Content Overview

The HCDP-BCRN exam covers IPv4 address planning, RIP, OSPF, IS-IS, and BGP routing
protocols, routing and routing control, multicast routing protocols, IPv6 basic protocols,
IPv6 routing protocol, and Huawei routers.

1.1.4.3 Exam results valid period

This exam result is valid for 3 years.

1.1.4.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Huawei Certified Pass any subject of the same level of certification in the field of the local
Datacom technology
Professional-Carrier Pass any subject of the high-level certification in the field of the local
technology

1.1.4.5 Key Points of Exam

IP Basics
1. IPv4 address planning: classless IP address planning, Classless Inter-Domain Routing
(CIDR), and NAT traversal
2. IPv6 basics: IPv6 packet structure, IPv6 address, ICMPv6 principles, basic neighbor
discovery principles, address autoconfiguration, PMTU auto-discovery principles, and
IPv6 address basic configuration

9
Huawei Certification Exam Outline (Partner)

Routing Basics
1. Basic principles and configuration of static routing
2. Basic principles of dynamic routing protocols

RIPs
1. Principles of distance vector routing protocols
2. RIP protocol principles, configuration, and implementation, and troubleshooting of
common faults
3. RIPng principles, configuration, and implementation

OSPF Routing Protocols


1. Basic principles of link state routing protocols
2. OSPF principles, configuration, and implementation: neighbor and adjacency, protocol
packet and LSA, database synchronization, intra-area route calculation, inter-area
route calculation, and external route calculation
3. Principles and configuration of OSPF special areas: stub area, totally stub area, and
not-so-stubby area (NSSA)
4. Basic methods of OSPF fault diagnosis
5. Basic principles and configuration of OSPFv3

IS-IS Routing Protocols


1. Basic principles, configuration, and implementation of IS-IS: basic protocol concepts,
adjacency, database synchronization, and route calculation
2. Basic methods of IS-IS fault diagnosis
3. Basic principles and configuration of IS-ISv6

BGP Routing Protocols


1. BGP principles: AS, BGP neighbors, route distribution methods, and route
advertisement rules
2. BGP path selection
3. BGP route aggregation
4. BGP routing policies: attributes and routings protocols commonly used in BGP
5. Basic principles and configuration of BGP route reflection and AS confederations for
BGP
6. BGP multi-homing
7. BGP fault diagnosis methods
8. Basic principles and configuration of MP-BGP for IPv6

Routing Control and Selection


1. Route filtering by using filtering tools such as ACL, route policy, IP-prefix, and AS-Path
2. Mutual route import between IP routing protocols and advertisement of default routes
3. Policy-based route

10
Huawei Certification Exam Outline (Partner)

Multicast Protocols
1. Basic principles and configuration of IGMPv1/v2/v3 and IGMP snooping
2. Basic principles and configuration of PIM-DM and PIM-SM

NE5000E/5000E-X16 and NE40E-X Series Routers


1. Hardware structure and working principles of NE routers
2. VRP software features of NE routers

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

1.1.4.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

1.1.4.7 References

Huawei Certified Datacom Training Courses HCDP-Carrier IP: Building Carrier Routing
Network (BCRN) Vol. I.
Huawei Certified Datacom Training Courses HCDP-Carrier IP: Building Carrier Routing
Network (BCRN) Vol. II.
Huawei Certified Datacom Training Courses HCDP-Carrier IP: Guide to Experiments on
Building Carrier Routing Network (BCRN)
VRP Configuration Guide
VRP Troubleshooting
VPR Feature Description

1.1.4.8 Recommended Training Program

BOM Training Program Level Duration

HCDP-BCRN (Huawei Certified Datacom Professional - Building


88980227 III 9
Carrier Routing Network) Training

11
Huawei Certification Exam Outline (Partner)

1.1.5 Huawei Certified Datacom Professional-Building IP


Telecom Network (HCDP-BITN) Exam Outline

1.1.5.1 Prerequisites

No prerequisites.

1.1.5.2 Exam Content Overview

The HCDP-BITN exam covers common technologies of IPTV, 3G, and NGN IP bearer
networks such as MPLS VPN, MPLS TE, QoS, and HA.

1.1.5.3 Exam results valid period

This exam result is valid for 3 years.

1.1.5.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Huawei Certified Pass any subject of the same level of certification in the field of the local
Datacom technology
Professional-Carrier Pass any subject of the high-level certification in the field of the local
technology

1.1.5.5 Key Points of Exam

QoS
1. IP QoS model and differentiated services (DiffServ) model
2. Basic principles of classification and marking, traffic policing and shaping, congestion
management, congestion avoidance, and link efficiency mechanisms and their
implementation in NE products
3. Class-based QoS principles and its implementation in NE products

High Availability (HA)


1. NSF/NSR/GR principles
2. Bidirectional Forwarding Detection (BFD) principles
3. Basic principles of IP reroute, IP FRR, LDP FRR, VPN FRR, and TE FRR
4. VRRP principles, configuration, and application

MPLS VPN
1. MPLS principles and implementation: MPLS frame format and encapsulation, MPLS
data forwarding process, LDP neighbor discovery and session establishment, LDP
label management, and MPLS loop avoidance
2. Basic principles and implementation of MPLS VPN: single-domain MPLS VPN

12
Huawei Certification Exam Outline (Partner)

principles and implementation; application of OSPF in MPLS VPN


3. MPLS VPN fault diagnosis: troubleshooting roadmap and debugging methods of
control plane faults; troubleshooting roadmap and debugging methods of data plane
faults

MPLS TE
1. MPLS TE principles and application: structure of MPLS TE and functions of its four
components, MPLS TE attributes, basic applications of MPLS TE, and basic
configuration and implementation of MPLS TE

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

1.1.5.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

1.1.5.7 References

Huawei Certified Datacom Training Courses HCDP-Carrier IP: Building IP Telecom


Network (BITN)
Huawei Certified Datacom Training Courses HCDP-Carrier IP: Guide to Experiments on
Building IP Telecom Network (BITN)
VRP Configuration Guide
VRP Troubleshooting
VPR Feature Description

1.1.5.8 Recommended Training Program

BOM Training Program Level Duration

HCDP-BITN (Huawei Certified Datacom Professional-Building IP


88980228 III 7
Telecom Network) Training

13
Huawei Certification Exam Outline (Partner)

1.1.6 Huawei Certified Internetwork Expert Improve Carrier


Network Performance (HCIE Carrier) Exam Outline

1.1.6.1 Prerequisites

For those who are ready to get the HCIE Carrier Certification, and become Huawei Certified
Network Specialist.

1.1.6.2 Exam Content Overview

HCIE Carrier certification includes Ethernet Technologies, VLAN, QinQ, STP/RSTP/MSTP,


PPP and PPPoE access technologies, AAA technologies, Huawei Switch and Broadband
Access Server; OSPFv2/v3, IS-ISv4/v6, BGP, MP-BGP for IPv6, IGMP, PIM-SM, PIM-DM;
MPLS, BGP MPLS VPN, QoS, VRRP, MPLS TE.

1.1.6.3 Exam results valid period

This exam result is valid for 3 years.

1.1.6.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
Huawei Certified
technology
Datacom Expert-Carrier
Pass any subject of the high-level certification in the field of the local
technology

1.1.6.5 Key Points of Exam

Ethernet Technologies
1. Etherenet History, Auto-negotiation, Link Aggregation, Port Mirroring, Working
principle of layer 2/3 switch
1. 802.1Q encapsulation, VLAN realization on Huawei products, Isolate-User-VLAN
2. VLAN inter-routing, Super VLAN, QinQ Theory and Configuration
3. GVRP protocol principle, Configuration and realisation
4. STP/RSTP/MSTP theory and configuration

IP Basic
1. IPv4 Address planning, classless IP address planning, Classless Inter Domain Routing,
NAT
2. IPv6 Basic, IPv6 packet format, IPv6 addreses, ICMPv6 theory configuration and
realization, Neighbor discovery, IPv6 address auto-configuration, PMTU auto
discovery theory, IPv6 address basic configuration

14
Huawei Certification Exam Outline (Partner)

RIP Routing Protocol


1. Distance-vector routing protocol
2. RIP basic principle and configuration and troubleshooting
3. RIPng basic principle and configuration

OSPF Routing Protocol


1. Link-state routing protocol algorithm
2. OSPF basic principle, configuration and realization: Neighbor and Adjacency, OSPF
protocol packet and LSA, Database synchronization, intra-area routing calculation,
inter-area routing calculation, external route calculation
3. OSPF special area principle and configuration: Stub, Totally Stub, NSSA
4. OSPF troubleshooting
5. OSPFv3 principle, configuration and realization

IS-IS Routing Protocol


1. IS-IS basic principle, configuration and realization: ISIS basic concepts, adjacency
relationship, database synchronization, route calculation
2. IS-IS Troubleshooting
3. IS-ISv6 basic priciple, configuration and realization

BGP Routing Protocol


1. BGP Basic priciple, configutaion and realization: AS, BGP neighbor, route
advertisement, BGP Route Advertisement Principles
2. BGP Route selection
3. BGP Route aggregation
4. BGP route policy: BGP route attribute and route policy
5. BGP RR and confederation principle, configutaion and realization
6. BGP multi-homing
7. BGP toubleshooting
8. MP-BGP for IPv6 basic priciple, configuration and realization

Route Control and Route Selection


1. Use ACL, route policy, IP-prefix, AS-Path as a route selection tools
2. Route redistribution between different routing protocolsdefault route distribution
3. Policy-based routing

Multicast
1. IGMPv1/v2/v3IGMP Snooping basic principle, configuration and realization
2. PIM-DMPIM-SM basic principle, configuration and realization

15
Huawei Certification Exam Outline (Partner)

Basic Access and Authentication Technologies


1. IPoE/IPoEoVLAN/IPoEoA/Static user access principle and realization on Huawei
BRAS products ; Web authentication, Fast authentication, Binding authentication
working principle, configuration and realization on Huawei BRAS products.
2. PPPoE/PPPoEoVLAN/PPPoEoA/PPPoA access mode and realization on Huawei
BRAS products
3. Radius protocol principle, configurationrealization and on Huawei BRAS products

MPLS VPN
1. MPLS basic principle and realization: MPLS frame mode encapsulation, MPLS data
forwarding, LDP neighbor discovery and session establishment, LDP label
management, MPLS loop avoidance
2. MPLS VPN basic principle, configuration and realization: single area MPLS VPN basic
principle and realization; Application of OSPF in MPLS VPN
3. MPLS VPN troubleshooting: control plane troubleshooting process and debugging
methods, data plane troubleshooting process and debugging methods

MPLS TE
1. MPLS TE basic principle, configuration and realization
2. MPLS TE four elements and function, MPLS TE attributes

Qos
1. IP QoS model, differentiated service model
2. Traffic classification and Marking, Traffic policing and shaping, congestion
management, congestion avoidance, Link Efficiency Mechanisms principle,
configuration and realization in Huawei products
3. Class-based QoS basic principle, configuration and realization in Huawei products

High Availability
1. ETH-TRUNKIP-TRUNKE-TRUNK basic principle
2. BFDBidirectional Forwarding Detectionbasic principle
3. IP RerouteIP FRRLDP FRRVPN FRRTE FRR basic principle, configuration and
realization
4. RPR basic principle, configuration and realization
5. VRRP basic principle, configuration and realization

IP Bearer Network and IP MAN Network Design


1. IP bearer Network, IP MAN Network structure and characteristic
2. IP bearer Network and IP MAN Network performance requirements
3. IGP COST design, dual plane switchover and protection

16
Huawei Certification Exam Outline (Partner)

1.1.6.6 Referenced Documents

VRP Feature Description


VRP Configuration Guide
VRP Troubleshotting

1.1.6.7 Participating in the Exam

HCIE-Carrier certification exam was published through the authorized exam center
Pearson VUE. You could take this certification exam in any Pearson VUE center. For more
information, please visit Pearson VUE official website (http://www.pearsonvue.com) or from
Pearson VUE center.

1.1.6.8 Recommended Training

BOM Training Program Level Duration

88980229/ HCIE (Huawei Certified Internetwork Expert-Improve Carrier


IV 25
88980230 Network Performance) Training

1.1.6.9 Huawei Certified Internetwork Expert - Lab Exam (HCIE Carrier Lab
Exam)

1) Lab exam will includes all the contents in HCIE-Carrier


2) Lab exam will involve network model which is similar to current network operator model,
such as, back bone, bearer network and also MAN network.
3) Lab exam need to involve 12 to 18 equipments, eg : NE40EME60S5300S3300
Firewall and so on
4) Lab exam is 8 hours, includes interview, network plaining and configuration,
troubleshooting
5) Lab exam will be focused on network operators network planning and roll-out. This will
be a simulation towards a real live-network roll-out and implementation. Emphasis on
the students understanding and ability to handle issues towards the real live network
6) During lab exam, students should be able to do the troubleshooting through critical
thinking. During the exam process, simulation of the real live network problem will be
done in the lab for the students to investigate, this is to emphasize on the students
technical understanding and ability to solve a technical issue efficiently and accurately.

The contents rovided to students is a general test paper; other related contents discussed might also
appear in the examinations.

17
Huawei Certification Exam Outline (Partner)

1.2 Access Network Exam Outline


1.2.1 Introduction of Access Network Exam

Exam Total
Certificate Exam Name Exam Code Exam Name Item number Pass Score
Duration Score

60 multiple-choice
HCNA Access HCNA Access questions (single-answer
HC-035-210-ENU 90 min 1000 600
Network Network and multiple-answer),
true-false questions

60 multiple-choice
HCNP Access HCNP Access questions (single-answer
HC-035-211-ENU 90 min 1000 600
Network Network and multiple-answer),
true-false questions

1.2.2 Huawei Certified Network Associate- Access Network


Exam Outline

1.2.2.1 Prerequisites

No prerequisites.

1.2.2.2 Exam Content Overview

This test covers: xDSL/ATM/GPON/EPON/DataCom basic theory. The following abilities


are required. Be familiar with hardware structure, features, standards, board types,
functions and interface. Know well about the detail steps of hardware installation,
commission, data configuration. Know how to use CLI of equipment to upgrade and be
familiar with HSIIPTVVOIP test and acceptance, understand how to use NMS, know
basic functions of SNMP, and can use NMS to add and monitor equipments.

1.2.2.3 Exam results valid period

This exam result is valid for 3 years.

1.2.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

1.2.2.5 Key Points of Exam

Theory
1. Know about basic theory of xDSL/ATM/GPON/EPON /DataCom/NMS/SNMP.

18
Huawei Certification Exam Outline (Partner)

Product
1. Know about structure, feathures, standards, board types, functions and interfaces of
access network products.

Service Configuration
1. Be familiar with network solution and basic configuration: VLAN/IP configuration and
can use NMS for equipment commissioning
2. Service configuration of HSIIPTVVOIP
3. Add and monitor equipment on NMS

Acceptance test
1. Know how to test service of HSIIPTVVOIP
2. Know how to use optical power meter.

Software upgrading
1. Function well with CLI of equipment to upgrade

Maintenance and troubleshooting


1. Know basic maintenance function on NMS alarm, equipments, problem information
collection of NMS and basic problem locating.

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

1.2.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :

http://www.vue.com/vtclocator/

1.2.2.7 References

HCAN-A (Huawei Certified Access Network-Associate)


Huawei product manuals

1.2.2.8 Recommended Training Program

Huawei Certified Network Associate-Huawei Access Network Technologies and Device

19
Huawei Certification Exam Outline (Partner)

BOM Training Program Level Duration


Huawei Certified Network Associate-Huawei Access Network
88980009 II 11
Technologies and Device

1.2.3 Huawei Certified Network Professional- Access Network


Exam Outline

1.2.3.1 Prerequisites

Past HCAN-A (Huawei Certified Access Network-Associate)

1.2.3.2 Exam Content Overview

This test covers: Theory of xDSL/ATM/GPON/EPON/DataCom, the following abilities are


required for the tester, usage of SNMP theory; knowing on troubleshooting of
xDSL/ATM/GPON/EPON; knowing about usage of DC upgrade tool, batch upgrade,NMS
upgrade; knowing how to do acceptance test for service of HSIIPTVVOIP, Familiar with
the typical solutions for Access Network migration and the usage of the migration tools

1.2.3.3 Exam results valid period

This exam result is valid for 3 years.

1.2.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

1.2.3.5 Key Points of Exam

Theory
1. Be familiar with xDSL/ATM/GPON/EPON /DATACOM; know theory of SNMP.

Product knowledge
1. Know hardware structure, features, standards, board type, fuction and interface.

Data configuration
1. Understand network solution and basic configuration: VLAN/IP configuration, and can
use NMS for equipment commissioning.
2. Know how to configure services on HSIIPTVVOIP.

20
Huawei Certification Exam Outline (Partner)

3. Know how to add and monitor equipments on NMS.


4. NMS single-server system installation.
5. Function well on data plan and network design for FTTx
6. Function well on the typical solutions for Access Network migration and the usage of
the migration tools.

Acceptance test
1. Service acceptance testing on HSIIPTVVOIP
2. Usage of optical power meter.
3. Usage of network migration tools.

Software upgrading
1. Usage of DC tool, batch upgrade and NMS upgrade.

Maintenance and troubleshooting


1. Know NMS alarms, problem information collection on NMS, basic troubleshooting.
Know NMS operating system and basic operation of database.

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

1.2.3.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :

http://www.vue.com/vtclocator/

1.2.3.7 References

HCAN-A (Huawei Certified Access Network-Associate)


HCAN -P(Huawei Certified Access Network-Professional)
Huawei product manuals

1.2.3.8 Recommended Training Program

Huawei Certified Network Professional-Huawei Access Network Technologies and Device


BOM Training Program Level Duration

Huawei Certified Network Professional-Huawei Access Network


88980010 III 13
Technologies and Device

21
Huawei Certification Exam Outline (Partner)

22
Huawei Certification Exam Outline (Partner)

1.3 Optical Network Exam Outline


1.3.1 Introduction of Optical Network Exam

Total Pass
Certificate Exam Name Exam Code Exam Name Exam Duration Item number
Score Score
60 multiple-choice
HCNA Huawei Certified questions
OPTICAL Network (single-answer and
HC-035-230-ENU 90 min 1000 600
NETWORK Associate-Optical multiple-answer),
Network true-false questions

60 multiple-choice
Huawei Certified questions
HCNP-Optical Network (single-answer and
HC-035-231-ENU 90 min 1000 600
Network Professional-Optical multiple-answer),
Network true-false questions

1.3.2 Huawei Certified Network Associate-Optical Network


Exam Outline

1.3.2.1 Prerequisites

No prerequisites.

1.3.2.2 Exam Content Overview

This test covers: SDH/WDM/datacom basic theory. The following abilities are required. Be
familiar with hardware structure, features, standards, board types, functions and interface.
Know well about the detail steps of hardware installation, commission, data configuration.
Know how to use DC tool, board-lever upgrade and package loading simulation and be
familiar with MSTP/HMSTP/WDM test and acceptance, understand how to use NMS, know
basic functions of SNMP, and can use NMS to add and monitor equipments.

1.3.2.3 Exam results valid period

This exam result is valid for 3 years.

1.3.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

23
Huawei Certification Exam Outline (Partner)

1.3.2.5 Key Points of Exam

Theory
2. Know about basic theory of SDH/WDM/datacom/NMS/SNMP.

Product
3. Know about structure, feathures, standards, board types, functions and interfaces of optical network
products.

Configuration
4. Be familiar with network solution and DCN configuration, NE ID/IP configuration, DWDM
commissoning
5. Service configuration of TDM(E1\STM-1\4\16\64), ETH, ODUK, GE, 40G\ANY
6. Protect service configuration of SNCP/MSP/APS/TPS/LAG
7. Add and monitor equipment on NMS

Acceptance test
8. Know how to test service of TDM(E1\STM-1\4\16\64), ETH, ODUK, GE, 40G\ANY
9. Know how to test SNCP/MSP/APS/TPS/LAG service.
10. Know how to use BER Tester and optical power meter.

Software upgrading:
11. Function well with DC tool, board-level upgrading and simulation package loading upgrade.

Maintenance and troubleshooting


12. Know basic maintenance function on NMS alarm, equipments, problem information collection of
NMS and basic problem locating.

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

1.3.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

1.3.2.7 References

HCNA (Huawei Certified Network Associate-Optical Network)


Huawei product manuals

24
Huawei Certification Exam Outline (Partner)

1.3.2.8 Recommended Training Program

Huawei Certified Network Associate-Huawei Optical Network Technologies and Device


Training
BOM Training Program Level Duration

Huawei Certified Network Associate-Huawei Optical Network Technologies


88980011 II 15
and Device Training

1.3.3 Huawei Certified Network Professional-Optical Network


Exam Outline

1.3.3.1 Prerequisites

No prerequisites.

1.3.3.2 Exam Content Overview

This test covers: Theory or usage of SDH/WDM/datacom/clock, the following abilities are
required for the tester, understand usage of SNMP theory/OAM of MSTP/QoS on NMS;
knowing on troubleshooting of SDH/WDM; knowing about usage of DC update tool,
board-lever update, updating simulation; knowing how to do acceptance test for service of
MSTP/HMSTP/WDM, function well with cutover, service miguration solution making and
acting.

1.3.3.3 Exam results valid period

This exam result is valid for 3 years.

1.3.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

1.3.3.5 Key Points of Exam

Theory
1. Be familiar with SDH/WDM/Datacom/Clock basics; know theory of SNMP/ASON.

Product knowledge
1. Know hardware structure, features, standards, board type, fuction and interface.

25
Huawei Certification Exam Outline (Partner)

Data configuration
1. Understand network solution and DCN configuration, NE ID/IP configuration, and can use NMS for
MSTP/HMSTP/WDM equipment commissioning.
2. Know how to configure services on TDM(E1\STM-1\4\16\64), ETH, ODUK, GE, 40G\ANY level.
3. Know how to configure protection of services such as SNCP/MSP/APS/TPS/LAG.
4. Know how to add and monitor equipments on NMS.
5. Know how to configure QoS/Clock/OAM of services.
6. NMS single-server system installation.
7. Function well on product data collection and basic service planning.
8. Function well on solution making and acting of cutover and service miguration.

Acceptance test
1. Service level on TDM(E1\STM-1\4\16\64)\ETH\ODUK\GE\40G\ANY
2. Know how to test protected service by SNCP/MSP/APS/TPS/LAG
3. Usage of BER Tester and optical power meter.
4. Usage of SDH analyzer, OSA, Smartbits.

Software upgrading
1. Usage of DC tool, board-level upgrading and simulation upgrading.

Maintenance and troubleshooting


1. Know NMS alarms, problem information collection on NMS, basic troubleshooting. Know NMS
operating system and basic operation of database.

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

1.3.3.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

1.3.3.7 References

HCNA (Huawei Certified Network Associate-Optical Network)


HCNP (Huawei Certified Network Professional-Optical Network)
Huawei product manuals

26
Huawei Certification Exam Outline (Partner)

1.3.3.8 Recommended Training Program

Huawei Certified Network Professional-Huawei Optical Network Technologies and Device


Training
BOM Training Program Level Duration
Huawei Certified Network Professional-Huawei Optical Network Technologies
88980012 III 10
and Device Training

27
Huawei Certification Exam Outline (Partner)

1.4 Microwave Product Exam Outline


1.4.1 Introduction of Microwave Product Exam

Exam Pass
Certificate Exam Name Exam Code Exam Name Item number Total Score
Duration Score
60 multiple-choice
Huawei Certified
HCNA questions (single-answer
Network
Microwave HC-035-240-ENU 90 min and multiple-answer), 1000 600
Associate-Microwave
Product true-false questions
Product
60 multiple-choice
Huawei Certified
HCNP questions (single-answer
Network
Microwave HC-035-241-ENU 90 min and multiple-answer), 1000 600
Professional-Microwave
Product true-false questions
Product

1.4.2 Huawei Certified Network Associate-Microwave Product


Exam Outline

1.4.2.1 Prerequisites

No prerequisites.

1.4.2.2 Exam Content Overview

The HCNA-HMTD exam covers digital microwave communication principle, ethernet basic,
RTN 600/900 product knowledge, RTN 600/900 installation and commissioning, hybrid
microwave configuration, acceptance test, software upgrade, routine maintenance.

1.4.2.3 Exam results valid period

This exam result is valid for 3 years.

1.4.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

1.4.2.5 Key Points of Exam

1. Digital microwave communication principle


2. Ethernet basic
3. Main characteristics of RTN 600/900 equipment
4. Hardware structure, function and application of RTN 600/900 equipment
5. Function and interface of boards in RTN 600/900

28
Huawei Certification Exam Outline (Partner)

6. Function and application of ODU/antenna


7. protection technologies in OptiX RTN 900 network
8. Installation procedure of RTN 600/900 equipment
9. RTN 600/900 commissioning
10. RTN 600/900 hybrid microwave configuration
11. RTN 900 acceptance test
12. RTN 900 software upgrade
13. RTN 600/900 routine maintenance
14. U2000-T Alarm and Performance

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

1.4.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

1.4.2.7 References

Huawei Certified Network Training Courses HCNA: Huawei Microwave Technology and
Device (HMTD)
Huawei product manuals

1.4.2.8 Recommended Training Program

Huawei Certified Network Associate-Huawei Microwave Technologies and Device Training.


BOM Training Program Level Duration

Huawei Certified Network Associate-Huawei Microwave


88980013 II 9 days
Technologies and Device Training.

1.4.3 Huawei Certified Network Professional-Microwave


Product Exam Outline

1.4.3.1 Prerequisites

No prerequisites.

29
Huawei Certification Exam Outline (Partner)

1.4.3.2 Exam Content Overview

The HCNP-HMTD exam covers digital microwave comunication, ethernet basic, PSN basic,
RTN 900 product knowledge, RTN 900 installation and commissioning, RTN 900 packet
microwave configuration, QoS/OAM/Clock configuration, RTN 900 acceptance test,
software upgrade, troubleshooting. U2000 Software Installation, U2000 product knowledge.

1.4.3.3 Exam results valid period

This exam result is valid for 3 years.

1.4.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

1.4.3.5 Key Points of Exam

1. Digital microwave communication principle


2. Ethernet basic
3. IP/MPLS/PWE3 basic
4. Main characteristics of RTN 900 equipment
5. Hardware structure, function and application of RTN 600/900 equipment
6. Function and interface of boards in RTN 600/900
7. Function and application of ODU/antenna
8. Installation procedure of RTN 600/900 equipment
9. RTN 900 commissioning
10. RTN 900 packet service configuration
11. RTN 900 MPLS APS configuration
12. RTN 900 QoS/OAM/Clock configuration
13. RTN 900 acceptance test
14. RTN 900 software upgrade
15. RTN 900 troubleshooting/data collection
16. U2000-T system knowledge
17. U2000 Single-Server System Software Installation

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

30
Huawei Certification Exam Outline (Partner)

1.4.3.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :

http://www.vue.com/vtclocator/

1.4.3.7 References

Huawei Certified Network Training Courses HCNP: Huawei Microwave Technology and
Device (HMTD)
Huawei product manuals

1.4.3.8 Recommended Training Program

Huawei Certified Network Professional-Huawei Microwave Technologies and Device


Training
BOM Training Program Level Duration

Huawei Certified Network Professional-Huawei Microwave


88980014 III 7
Technologies and Device Training

31
Huawei Certification Exam Outline (Partner)

2 Core Network
2.1 Mobile Soft Switch Exam Outline
2.1.1 Introduction of Mobile Soft Switch Exam Outline

Exam Total Pass


Certificate Exam Name Exam Code Exam Name Item number
Duration Score Score
60 single choice,
HCNA Mobile Huawei certified mobile
HC-035-311-ENU 90 minutes multiple choices, and 900 550
Soft Switch soft switch engineer
true or false
60 single choice,
HCNP Mobile Huawei certified mobile
HC-035-310-ENU 90 minutes multiple choices, and 900 550
Soft Switch soft switch senior engineer
true or false

2.1.2 Huawei Certified Network Associate- Mobile Soft Switch


Exam Outline

2.1.2.1 Prerequisites

No prerequisites.

2.1.2.2 Exam Content Overview

Mobile switching center and Media Gateway test covers the basic knowledge of mobile
core network communication, including TCP/IP, basic theory of mobile soft switch, SS7
signaling, hardware system of the MSOFTX3000 and UMG8900, data configuration for
network element interworking, common number analysis, basic call flow and the
corresponding protocols, MSOFTX3000 and UMG8900 fault troubleshooting, routine
maintenance and major maintenance and operation of the MSOFTX3000 and UMG8900.

2.1.2.3 Exam results valid period

This exam result is valid for 3 years.

2.1.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

2.1.2.5 Key Points of Exam

IP network
1. Basic concepts of network, layer 2 signaling exchanging, virtual local area network

32
Huawei Certification Exam Outline (Partner)

2. Architecture of the open systems interconnection protocol and the TCP/IP protocol,
functions of each layer and packet encapsulation
3. IPv4 subnetting

Knowledge and principle of the MSOFTX3000 and UMG8900


1. The basic principle and architecture evolution of the core network
2. Product knowledge of the CPCI and ATCA MSOFTX3000, and the board layout and
capacity planning of the UMG8900
3. Data configuration for interconnection between the MSOFTX3000 and the UMG8900
and the corresponding network elements
4. Common number analysis of MSOFTX3000
5. Routine maintenance and major maintenance and operation including version upgrade,
patch loading, and operation rollback

Basic call flow and the corresponding protocols


1. Signaling analysis during location upgrade, ordinary calls (mobile originated calls,
mobile terminated calls and inter-MSC calls), handovers and short messages. The
way how the protocols such as H248, BICC, and SIGTRAN are realized in each
interface of the MSOFTX3000 and UMG8900

Troubleshooting
1. Troubleshooting in hardware fault and replacement, location update, and common
calls

This document only provides a general guide for the candidates rather than an actual coverage of the test
content.

2.1.2.6 Participating in the Exam

N/A

2.1.2.7 Reference

For product knowledge of the MSC and MGW, refer to the customer product document and
manual.

2.1.2.8 Recommended Training Program

Huawei Certified Network Associate-Huawei Mobile Soft Switch Technologies and Device
Training
BOM Training Program Level Duration

Huawei Certified Network Associate-Huawei Mobile Soft Switch


88980015 II 21
Technologies and Device Training

33
Huawei Certification Exam Outline (Partner)

2.1.3 Huawei Certified Network Professional - Mobile Soft


Switch Exam Outline

2.1.3.1 Requirements for Candidates

No prerequisites.

2.1.3.2 Exam Content Overview

Medium-level mobile soft switch test covers the knowledge of the core network
communication, data configuration between interconnected network elements, integrated
number and route analysis , integrated signaling analysis and the corresponding protocols,
integrated fault location, MSC Pool and AOIP solutions.

2.1.3.3 Exam results valid period

This exam result is valid for 3 years.

2.1.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

2.1.3.5 Key Points of Exam

IP network
1. Basic concepts in network, layer 2 and layer 3 signaling exchanging, and IP subnetting
2. IP transformation in mobile communications

Product knowledge and principle


1. The principle and architecture of mobile soft switch in the core network; data
configuration for interworking between network elements
2. Integrated number and route analysis

The protocols used in mobile soft switch and signaling analysis


1. The protocols such as MAP, CAP, BSSAP/RANAP, BICC, SIP, BICC, SIGTRAN, H248
and SCTP in the mobile soft switching interfaces and the signaling analysis during
basic services, supplementary service, value-added services, mobility management,
and handovers

Integrated troubleshooting
1. Troubleshooting in the service, including bearer and signaling

34
Huawei Certification Exam Outline (Partner)

Product solutions
1. MSC Pool and AoIP

This document only provides a general guide for the candidates rather than an actual coverage of the test
content.

2.1.3.6 Participating in the Exam

N/A

2.1.3.7 Reference

For product knowledge of the mobile soft switch, refer to the customer product information.

2.1.3.8 Recommended Training Program

Huawei Certified Network Professional-Huawei Mobile Soft Switch Technologies and


Device Training
BOM Training Program Level Duration

Huawei Certified Network Professional-Huawei Mobile Soft Switch


88980016 III 21
Technologies and Device Training

35
Huawei Certification Exam Outline (Partner)

2.2 NGN Exam Outline


2.2.1 Introduction of NGN Exam Outline

Total Pass
Certificate Exam Name Exam Code Exam Name Exam Duration Item number
Score Score
60 multiple-choice
questions
(single-answer and
HCNA NGN HC-035-320-ENU Huawei Certified Network 90 min 1000 550
multiple-answer),
Associate-NGN
true-false questions

60 multiple-choice
questions
Huawei Certified Network (single-answer and
HCNP NGN HC-035-321-ENU 90 min 1000 550
Professional-NGN multiple-answer),
true-false questions

2.2.2 Huawei Certified Network Associate-NGN Exam Outline

2.2.2.1 Prerequisites

No prerequisites.

2.2.2.2 Exam Content Overview

The NGN Primary Engineer Certification exam covers NGN system architecture, NGN
protocol and Huawei U-SYS solution; Huawei NGN product data configuration, operation
and maintenance, and troubleshooting.

2.2.2.3 Exam results valid period

This exam result is valid for 3 years.

2.2.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

2.2.2.5 Key Points of Exam

NGN Basic Principle


1. The basic concepts, system architecture, services, networking and applications of
NGN.
2. The components, services, networking and applications of Huawei U-SYS solution.
3. The functions, features, applications, terms, stack structure and messages of NGN
protocols (MGCP, H.248, SIP, SIGTRAN).

36
Huawei Certification Exam Outline (Partner)

NGN Product Introduction


1. The network topology, services, functions, system structure, board functions, board
indicators, networking, applications and technical specifications of
SoftX3000/UMG8900/SG7000/MRS6100/SE2300.
2. The network topology, services and functions of U-Path.

NGN Basic Data Configuration


1. The hardware and local office data configuration of SoftX3000.
2. The hardware data configuration, MGW data configuration and IP bearer data
configuration.
3. The hardware data configuration of MRS6100.
4. The hardware data configuration and local office data configuration of SG7000.

NGN Data Configuration & Acceptance Testing


1. The service data configuration steps of SoftX3000, and the common service data
configuration (charging data configuration, media gateway data configuration, protocol
data configuration, SS7 signaling data configuration, routing data configuration, trunk
data configuration, number analysis data configuration, subscriber data configuration).
2. The service data configuration steps of UMG8900, and the common service data
configuration (TG data configuration, SG data configuration).
3. The service data configuration steps of MRS6100, and the system data configuration
and the voice file loading.
4.The service data configuration steps of SG7000, and the common service data
configuration (MTP data configuration, M3UA data configuration).
5. The service data configuration steps of SE2300, and the common service data
configuration (SNMP data configuration, signaling PROXY and media PROXY data
configuration).
6. The software installation and the service configuration of U-Path.

NGN Maintenance & Troubleshooting


1. The routine operation and maintenance of SoftX3000 (operator authority management,
database backup and restoration, data consistent checking between the host and
BAM, log management, alarm management, device management, media gateway
management, protocol and signaling management, trunk circuit management,
subscriber management, bill management).
2. The routine operation and maintenance of iGWB.
3. The routine operation and maintenance of UMG8900 (database backup, log
management, alarm management, device management, protocol tracing, service
management).
4. The routine operation and maintenance of MRS6100 (log management, alarm
management, device management, message tracing).
5. The routine operation and maintenance of SG7000 (database backup, log

37
Huawei Certification Exam Outline (Partner)

management, alarm management, device management, signaling tracing).


6. The routine operation and maintenance of SE2300 (log management, alarm
management, device management, signaling PROXY and media PROXY debugging).
7. The routine operation and maintenance of U-Path (log management, system status
browsing, and bill management).
8. The common troubleshooting of NGN equipment.

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

2.2.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

2.2.2.7 References

Huawei NGN product manuals

2.2.2.8 Recommended Training Program

Huawei Certified Network Associate-Huawei NGN Technologies and Device Training


BOM Training Program Level Duration

Huawei Certified Network Associate-Huawei UMG&SBC Technologies and


88980017 II 20
Device Training

2.2.3 Huawei Certified Network Professional-NGN Exam


Outline

2.2.3.1 Prerequisites

No prerequisites.

2.2.3.2 Exam Content Overview

The NGN Primary Engineer Certification exam covers NGN system architecture, NGN
protocol and Huawei U-SYS solution; Huawei NGN product data configuration, operation
and maintenance, and troubleshooting.

38
Huawei Certification Exam Outline (Partner)

2.2.3.3 Exam results valid period

This exam result is valid for 3 years.

2.2.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

2.2.3.5 Key Points of Exam

NGN Basic Principle


1. The command parameters and call processing procedure of NGN protocols.
2. The principle, application of NGN dual home.
3. The NGN C4 and C5 office migration solution.

NGN Product Introduction


1. The working principle and service processing procedure of SoftX3000.
2. The principle, processing procedure, operation and original bill format of NGN
charging system
3. The system structure and configuration of iGWB.
4. The means of improving voice quality of NGN.
5. The working principle and service processing procedure of UMG8900.
6. The working principle, announcement principle and service processing procedure of
MRS6100.

NGN Basic Data Configuration


1. The service data configuration of SoftX3000 (number changing data configuration, call
barring data configuration).
2. The language conversion of voice and voice loading of MRS6100.
3. The service data configuration of SG7000 (MTP load sharing data configuration).

NGN Data Configuration & Acceptance Testing


1. The data planning and data configuration of NGN dual home.
2. The NGN C4 and C5 office migration operation.

NGN Maintenance & Troubleshooting


1. The routine maintenance of NGN dual home.
2. The common problem analysis and processing of NGN protocols.
3. The troubleshooting of NGN network.

39
Huawei Certification Exam Outline (Partner)

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

2.2.3.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

2.2.3.7 References

Huawei NGN product manuals

2.2.3.8 Recommended Training Program

Huawei Certified Network Professional-Huawei NGN Technologies and Device Training


BOM Training Program Level Duration
Huawei Certified Network Professional-Huawei NGN Technologies
88980018 III 11
and Device Training

40
Huawei Certification Exam Outline (Partner)

2.3 MGW&SBC Exam Outline


2.3.1 Introduction of MGW&SBC Exam Outline

Exam Total Pass


Certificate Exam Name Exam Code Exam Name Item number
Duration Score Score

HCNA MGW&SBC 60 questions:


HCNA (Huawei Certified Single choice,
HC-035-330-ENU 90 minutes 1000 550
MGW&SBC Network multiple choices,
Associate-MGW&SBC) and true or false

2.3.2 Huawei Certified Network Associate- MGW&SBC Exam


Outline

2.3.2.1 Requirements for Candidates

No prerequisites.

2.3.2.2 Exam Content Overview

Test for MGW&SBC software commissioning engineer contains the UMG8900 and the
session border controller (SBC), the mainstream products in Huawei mobile soft switch
(NGN/GU and CDMA).The test covers hardware components and working principle of the
UMG8900 and the SBC, their position in the network and the networking architecture,
external interface type, principle of the corresponding protocols such as H.248, ATM, SIP,
and SIGTRAN, installation and commissioning, data configuration, operation and
maintenance, and troubleshooting methods.

2.3.2.3 Exam results valid period

This exam result is valid for 3 years.

2.3.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

2.3.2.5 Key Points of Exam

Principle
1. The position and function of the UMG8900/SBC in NGN/CS networking
2. System principle of the UMG8900
3. Common-used protocols such as SIP, ATM, H.248, SIGTRAN and No.7 signaling

41
Huawei Certification Exam Outline (Partner)

4. Location and function of the SBC in the network; working principle, hardware
specification and typical networking of NAT/ALG/PROXY.
5. Working principle of the media gateway system, data and singling processing flow
between boards
Produce knowledge
1. Hardware architecture and components of the UMG8900 and the SBC
2. Function of the hardware and the logical boards of the UMG8900 and the SBC
3. System configuration principle, cascading mode and typical board configuration of the
UMG8900 and the SBC

Software Installation
1. Software upgrade, tone file creating and loading, and troubleshooting during the
software commissioning of the UMG8900 and the SBC

Configuration Description
1. General flow of data configuration, hardware configuration and local office data
configuration of the UMG8900 and the SBC
2. Data configuration specifications of the UMG8900 and the SBC
3. Commissioning of the interconnection between the UMG8900 and the SBC and
troubleshooting capacity
4. Commissioning configuration of the interconnection between the UMG8900 and the
SBC on an NGN and CS
5. Board layout and capacity planning of the UMG8900 and the SBC

This document only provides a general guide for the candidates rather than an actual coverage of the test
content.

2.3.2.6 Participating in the Exam

The test is released by the authorized test center-Pearson VUE. You can select the nearest
Pearson VUE for application and to take the test.
For more details about the Pearson VUE, visit http://www.pearsonvue.com.cn.

2.3.2.7 Reference

Customer product information of the UMG8900/SBC

2.3.2.8 Recommended Training Program

Huawei Certified Network Associate-Huawei UMG&SBC Technologies and Device Training


BOM Training Program Level Duration

Huawei Certified Network Associate-Huawei UMG&SBC


88980019 II 9
Technologies and Device Training

42
Huawei Certification Exam Outline (Partner)

2.4 USC Exam Outline


2.4.1 Introduction of USC Exam Outline

Total Pass
Certificate Exam Name Exam Code Exam Name Exam Duration Item number
Score Score
SingleSDB HC-035-340-ENU 90 minutes 60 single-choice, 1000 550
multiple-choice, or true
or false questions
SingleSDB HC-035-341-ENU 90 minutes 60 single-choice, 1000 600
multiple-choice, or true
or false questions

2.4.2 Huawei Certified Network Associate-USC Exam Outline

2.4.2.1 Candidate Requirements

No prerequisites.

2.4.2.2 Examination Content

The SingleSDB primary examination covers the basic knowledge of the HLR in the CN,
including CN basic principles, HLR basic principles, and the networking architecture,
solutions, and basic principles of the SingleSDB.
Candidates should be able to:
Be familiar with the hardware structure of the SingleSDB
Understand the hardware installation flow, system cascading principles, and
procedure
Know the USC software architecture and software installation procedure
Have ever completed software installation, commissioning, and data configuration in
the laboratory or in practice
Understand the USC signaling, data, provisioning system, OM interconnection, and
commissioning
Familiarize themselves with the main service and service flow of the HLR
Understand how to perform subscriber data management, service management,
subscription management, and batch operations in Huawei HLR9820

2.4.2.3 Exam results valid period

This exam result is valid for 3 years.

2.4.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods

43
Huawei Certification Exam Outline (Partner)

To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

2.4.2.5 Key Points of Exam

Systematic Principles
1. General SingleSDB solutions
2. Networking of the SingleSDB, multiple-NE deployment, and features
3. Position of the HLR9820 in the network
4. Interfaces, functions, and protocol stack supported by the HLR9820
5. Software functions of the HLR9820: FE system function structure, function structure of
signaling processing subsystem; subscriber data management subsystem, data
service subsystem, data storage subsystem

Product Knowledge
1. Buses and functions of the ATCA platform
2. Hardware logical structure, cabinet, components, board classification, board function,
meaning of major indicators, board deployment rules, LAN switch deployment rules of
the HLR9820
3. Logical board functions, hardware configuration rules, and typical board configuration
rules of the HLR9820
4. Security performance, features, flow control, and multi-level backup mechanism of the
HLR9820
5. Inter-subrack cascading, hardware installation, and internal cable connection of the
HLR9820

Installation Procedure, Flow, and Operation


1. Conditions, general flow, and notes of hardware installation, and hardware acceptance
standards
2. Procedure and principles of software installation
3. Connection modes and interfaces used for the SingleSDB to interwork with the
maintenance network, provisioning system, and other devices
4. Rules for installing and deploying software of the HLR9820 and software installation of
the HLR9820
5. Software installation and system commissioning of the HLR9820

Data Configuration and Commissioning


1. Rules for deploying processes on boards
2. Commonly used numbering scheme in the GSM/UMTS network
3. Hardware configuration and reliability features of the HLR9820
4. Software structure and reliability features of the HLR9820
5. Basic concepts of the HLR9820 software system: site, NE, cluster, node, module

44
Huawei Certification Exam Outline (Partner)

6. Main service flows and implementation principles such as location update,


authentication, and voice calls
7. Data configuration of the USCDB
8. Data configuration of the GU HLR9820
9. Global data configuration
10. Rules and methods for signaling data configuration

Subscriber Data Management Function Provided by the HLR9820


1. Features and measurement of the HLR9820
2. Service processing flow, software architecture, MAP service flow processing path, and
service flow processing path of the provisioning system
3. Commonly used service and service management methods of the HLR9820
4. Subscription data management provided by the HLR9820
5. Batch operations provided by the HLR9820

NOTE
The examination content serves only as the guidelines for universal examinations. Other content that is not
mentioned in this document may appear in an examination.

2.4.2.6 Examination Participation

This examination is published through the examination center authorized by Pearson VUE.
You can choose the nearest examination center authorized by Pearson VUE to take the
examination.
To query information about the authorized examination center, visit
http://www.pearsonvue.com.cn.

2.4.2.7 References

SingleSDB (G/U HLR9820) Training Manual for Installation and Commissioning Engineers
Primary
Each product manual of the SingleSDB

2.4.2.8 Recommended Training Program

SingleSDB (G/U HLR9820) Training Manual for Installation and Commissioning Engineers
Primary
BOM Training Program Level Duration

SingleSDB (G/U HLR9820) Training Manual for Installation and


88980020 II 10
Commissioning Engineers Primary

45
Huawei Certification Exam Outline (Partner)

2.4.3 Huawei Certified Network Professional -USC Exam


Outline

2.4.3.1 Candidate Requirements

No prerequisites.

2.4.3.2 Examination Content

The advanced SingleSDB examination covers the networking and product knowledge of
the HLR in the core network (CN). Candidates need to not only understand the primary
knowledge but also be able to perform the following operations:
Main signaling and service flows
Networking and redundancy solutions and technologies
Routine operation and maintenance

2.4.3.3 Exam results valid period

This exam result is valid for 3 years.

2.4.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

2.4.3.5 Key Points of Exam

Systematic Principles
1. Software and hardware structure and basic principles of the SingleSDB
2. Networking solutions, architecture, and reliability design solutions of the SingleSDB
3. Typical service signaling flows of the HLR9820
4. Principles of the DS system, principles of data replication, synchronization, and
verification, and maintenance methods
5. Security performance, features, flow control, and multi-level backup mechanism of the
HLR9820

Product Knowledge
1. Networking solution differences and analysis of typical redundancy scenarios
2. Data layer redundancy, service layer redundancy, separated data and services,
distributed deployment, and redundancy principles
3. Internal networking and IP planning
4. External networking requirements and interconnection methods of the HLR9820

46
Huawei Certification Exam Outline (Partner)

5. System configuration, deployment rules, and typical scenarios analysis

Data Configuration
1. Typical networking and configuration of typical networking scenarios
2. Basic data configuration, global data configuration, and signaling data configuration of
the HLR9820
3. Commissioning and interconnection of the HLR9820
4. Subscriber data management provided by the HLR9820
5. Redundancy principles and commonly used maintenance and configuration:
redundancy operations, baseline creation, incremental data synchronization,
redundancy takeover, and switchback

Operation and Maintenance


1. Commonly used methods for operation and maintenance of the SingleSDB
2. Implementation principles and operation methods of performance measurement,
alarms, license, scheduled tasks, and NTP function
3. Detailed operations of database backup and recovery
4. Commonly used operation commands and methods
5. Various operation and maintenance scenarios and notes
6. Methods and detailed operations of system health check

Troubleshooting
1. Commonly used troubleshooting: fault classification, typical scenarios, fault
identification methods, and emergency handling

NOTE
The examination content serves only as the guidelines for universal examinations. Other content that is not
mentioned in this document may appear in an examination.

2.4.3.6 Examination Participation

This examination is published through the examination center authorized by Pearson VUE.
You can choose the nearest examination center authorized by Pearson VUE to take the
examination.
To query information about the authorized examination center, visit
http://www.pearsonvue.com.cn.

2.4.3.7 References

SingleSDB (G/U HLR9820) Training Manual for Installation and Commissioning Engineers
Advanced
Each product manual of the SingleSDB
SingleSDB Redundancy Manual

47
Huawei Certification Exam Outline (Partner)

2.4.3.8 Recommended Training

SingleSDB (G/U HLR9820) Training Manual for Installation and Commissioning Engineers -
Advanced
BOM Training Program Level Duration

SingleSDB (G/U HLR9820) Training Manual for Installation and


88980021 III 4
Commissioning Engineers - Advanced

48
Huawei Certification Exam Outline (Partner)

2.5 SG Exam Outline


2.5.1 Introduction of SG Exam Outline

Exam Total Pass


Certificate Exam Name Exam Code Exam Name Item number
Duration Score Score
Huawei Certified 60 multiple-choice
HCNA SG
Network questions (single-answer
(Huawei Certified
Associate-Huawei SG HC-035-350-CHS 90 min and multiple-answer), 1000 550
Network
Technologies and true-false questions
Associate-SG)
Device
Huawei Certified 60 multiple-choice
HCNP SG
Network questions (single-answer
(Huawei Certified
Professional-Huawei SG HC-035-351-CHS 90 min and multiple-answer), 1000 550
Network
Technologies and true-false questions
Professional-SG)
Device

2.5.2 Huawei Certified Network Associate-SG Exam Outline

2.5.2.1 Prerequisites

No prerequisites.

2.5.2.2 Exam Content Overview

The NGN Primary Engineer Certification exam covers SS7 signaling system, signaling
network, SIGTRAN protocol, data configuration, operation and maintenance, and
troubleshooting.

2.5.2.3 Exam results valid period

This exam result is valid for 3 years.

2.5.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

2.5.2.5 Key Points of Exam

SG7000 Protocol
1. The basic concepts, architecture, MTP functions of SS7 Signaling System and
signaling network.
2. The basic function of SCCP.
3. The format of SCCP message and the meaning of the message which are often used.
4. The basic concept of SIGTRAN, the structure and signaling procedures of

49
Huawei Certification Exam Outline (Partner)

M2PA/M3UA.

SG7000 Product Introduction


1. The SG7000 system structure and hardware architecture, including the cabinet, frame,
board and the performance features of SG7000.
2. The SG7000 logical architecture and signaling flow.
3. The hardware data, narrowband link data and broadband link data.
4. The common operation of maintenance such as message tracing, log management,
alarm management and link management.
5. The SG7000 client software installation.
6. The SCCP and M2PA data configuration of SG7000.

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

2.5.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

2.5.2.7 References

Huawei SG7000 product manuals

2.5.2.8 Recommended Training Program

Huawei SG7000 Primary Training.


BOM Training Program Level Duration

88980022 Huawei SG7000 Primary Training. II 5

2.5.3 Huawei Certified Network Professional-SG Exam Outline

2.5.3.1 Prerequisites

No prerequisites.

2.5.3.2 Exam Content Overview

The SG Engineer Certification exam covers MTP/SCCP loadsharing, SG advanced


troubleshooting.

50
Huawei Certification Exam Outline (Partner)

2.5.3.3 Exam results valid period

This exam result is valid for 3 years.

2.5.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

2.5.3.5 Key Points of Exam

1. The basic principle of MNP service.


2. The SG7000 MTP loadsharing data configuration.
3. The SG7000 SCCP loadsharing data configuration.
4. The troubleshooting method of SG7000.
5. The information collection of SG7000 trouble.
6. The hardware trouble, link trouble and SCCP layer trouble.

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

2.5.3.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

2.5.3.7 References

Huawei SG7000 product manuals

2.5.3.8 Recommended Training Program

Huawei SG7000 Professional Training.


BOM Training Program Level Duration

88980023 Huawei SG7000 Professional Training III 2

51
Huawei Certification Exam Outline (Partner)

3 Wireless
3.1 GSM Exam Outline
3.1.1 Introduction of GSM Exam Outline

Exam Pass
Certificate Exam Name Exam Code Exam Name Item number Total Score
Duration Score
60 multiple-choice
HCNA GSM
questions (single-answer
(Huawei Certified
HCNA-GSM HC-035-410-ENU 90 min and multiple-answer), 1000 600
Network
true-false questions
Associate-GSM)
60 multiple-choice
HCNP-GSM
questions (single-answer
(Huawei Certified
HCNP-GSM HC-035-411-ENU 90 min and multiple-answer), 1000 600
Network
true-false questions
Professional-GSM)

3.1.2 Huawei Certified Network Associate-GSM Exam Outline

3.1.2.1 Prerequisites

No prerequisites.

3.1.2.2 Exam Content Overview

HCNA GSM exam covering the basic principles of the GSM and GPRS systems, product
architecture and specifications, typical hardware configuration, engineering survey and
hardware installation, software commissioning and testing, acceptance testing,
maintenance and troubleshooting.

3.1.2.3 Exam results valid period

This exam result is valid for 3 years.

3.1.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

3.1.2.5 Key Points of Exam

Principles
1. The basic principle of GSM and GPRS technology
2. GSM system architecture and the wireless network interface

52
Huawei Certification Exam Outline (Partner)

Product knowledge
1. BSC6900 (GSM) system overview, hardware architecture and product specifications
2. BTS3900/DBS3900 (GSM) hardware architecture and module functions
3. Typical configuration of BTS3900/DBS3900 (GSM)
4. BTS3900/DBS3900 (MBTS) hardware architecture and module functions
5. Typical configuration of BTS3900/DBS3900 (MBTS)

Engineering survey and hardware installation


1. Engineering survey (product knowledge)
1) Engineering survey of site controller
2) Engineering survey of site
2. Installation design
1) Installation design of site controller
2) Installation design of site
3. Hardware installation
1) Hardware installation of site controller
2) Hardware installation of site (including feeder system, monitoring, and other
peripherals)

Software Commissioning
1. Remote/local commissioning of the site
2. Site integration
3. Site service testing
4. Testing tool and testing indicators

Acceptance testing
1. Hardware installation check
2. Acceptance of a single-site (including service testing)

Maintenance and troubleshooting


1. Site hardware replacement
2. Site information collection
3. Deal with site problems on-site
4. Deal with site emergency recovery on-site

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

53
Huawei Certification Exam Outline (Partner)

3.1.2.6 Participating in the Exam

3.1.2.7 References

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :http://www.vue.com/vtclocator/

3.1.2.8 Recommended Training Program

HCNA-GSM(Huawei Certified Network Associate-Huawei GSM Technologies and Device)


training.
BOM Training Program Level Duration

HCNA-GSM(Huawei Certified Network Associate-Huawei GSM


88980024 II 11
Technologies and Device) training.

3.1.3 Huawei Certified Network Professional-GSM Exam


Outline

3.1.3.1 Prerequisites

No prerequisites.

3.1.3.2 Exam Content Overview

GSM exam covering the basic principles of the GSM and GPRS systems, product
architecture and specifications, typical hardware configuration, engineering survey and
hardware installation, software commissioning and testing, acceptance testing,
maintenance and troubleshooting. Based on the HCNA examination, HCNP examination
add the containts below: basic signaling process of the GSM system, the M2000 and
CME-related product knowledge, data configuration, software commissioning of site
controler, site software upgrades.

3.1.3.3 Exam results valid period

This exam result is valid for 3 years.

3.1.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:

Certificate Re-certification Methods

54
Huawei Certification Exam Outline (Partner)

To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

3.1.3.5 Key Points of Exam

Principles
1. The basic principle of GSM and GPRS technology
2. The signaling process of GSM system

Product knowledge
1. BSC6900 (GSM) system overview, hardware architecture and product specifications
2. BTS3900/DBS3900 (GSM/MBTS) hardware architecture, module functions and typical
configuration
3. CME configuration tool principles and operational guidance
4. The M2000 system architecture and operating instructions

Engineering survey and hardware installation


1. Engineering survey (product knowledge) of controller and site
2. Installation design of controller and site
3. Hardware installation of controller and site (including feeder system, monitoring, and
other peripherals)

Software Commissioning
1. Remote/local commissioning, integration and service testing of the site
2. Testing tool and testing indicators
3. Data configuration(site controller and site)
4. Software commissioning of the controller
5. New site integration through M2000

Acceptance testing
1. Hardware installation check
2. Acceptance of a single-site (including service testing)
3. Acceptance of controller

Software Upgrade
1. Local upgrade of the site
2. Remote upgrade of the site

Maintenance and troubleshooting


1. Hardware replacement and information collection of controller
2. Deal with problems and emergency recovery of controller on-site

55
Huawei Certification Exam Outline (Partner)

3. Network inspection through NIC and OMSTAR tools

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

3.1.3.6 Participating in the Exam

he exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :http://www.vue.com/vtclocator/

3.1.3.7 References

3.1.3.8 Recommended Training Program

HCNP-GSM(Huawei Certified Network Professional-Huawei GSM Technologies and


Device) training.
BOM Training Program Level Duration

HCNP-GSM(Huawei Certified Network Professional-Huawei GSM


88980025 III 14
Technologies and Device) training.

56
Huawei Certification Exam Outline (Partner)

3.2 WCDMA Exam Outline


3.2.1 Introduction of WCDMA Exam Outline

Total Pass
Certificate Exam Name Exam Code Exam Name Exam Duration Item number
Score Score
60 multiple-choice
HCNA WCDMA
questions (single-answer
(Huawei Certified
HCNA-WCDMA HC-035-420-ENU 90 min and multiple-answer), 1000 600
Network
true-false questions
Associate-WCDMA)
60 multiple-choice
HCNP-WCDMA
questions (single-answer
(Huawei Certified
HCNP-WCDMA HC-035-421-ENU 90 min and multiple-answer), 1000 600
Network
true-false questions
Professional-WCDMA)

3.2.2 Huawei Certified Network Associate-WCDMA Exam


Outline

3.2.2.1 Prerequisites

No prerequisites.

3.2.2.2 Exam Content Overview

HCNA WCDMA exam covering the basic principles of the WCDMA and GPRS systems,
product architecture and specifications, typical hardware configuration, engineering survey
and hardware installation, software commissioning and testing, acceptance testing,
maintenance and troubleshooting.

3.2.2.3 Exam results valid period

This exam result is valid for 3 years.

3.2.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

3.2.2.5 Key Points of Exam

Principles
1. The basic principle of WCDMA technology
2. WCDMA system architecture and the wireless network interface

57
Huawei Certification Exam Outline (Partner)

Product knowledge
1. BSC6900 (WCDMA) system overview, hardware architecture and product
specifications
2. BTS3900/DBS3900 (WCDMA) hardware architecture and module functions
3. Typical configuration of BTS3900/DBS3900 (WCDMA)
4. BTS3900/DBS3900 (MBTS) hardware architecture and module functions
5. Typical configuration of BTS3900/DBS3900 (MBTS)

Engineering survey and hardware installation


1. Engineering survey (product knowledge)
1) Engineering survey process of controller
2) Engineering survey process of site
2. Installation design
1) Site Controller installation design
2) Site Installation design
3. Hardware Installation
1) Site controller Installation
2) Site (including feeder system, monitoring, and other peripherals) Installation

Software Conmmissioning
1. Remote/Local commissioning of the site
2. Site integration and site service testing
3. Testing indicators
4. Testing tool
5. Acceptance testing
1) Hardware installation check
2) Acceptance of a single-site (including service testing)

Maintenance and troubleshooting


1. Hardware Replacement
2. Information collection for site
3. Deal with problems on site
4. On-site emergency recovery for site

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

58
Huawei Certification Exam Outline (Partner)

3.2.2.6 Participating in the Exam

3.2.2.7 References

3.2.2.8 Recommended Training Program

Huawei Certified Network Associate-Huawei WCDMA Technologies and Device


BOM Training Program Level Duration

Huawei Certified Network Associate-Huawei WCDMA


88980026 II 9
Technologies and Device

3.2.3 Huawei Certified Network Professional-WCDMA Exam


Outline

3.2.3.1 Prerequisites

No prerequisites.

3.2.3.2 Exam Content Overview

WCDMA exam covering the basic principles of the WCDMA and GPRS systems, product
architecture and specifications, typical hardware configuration, engineering survey and
hardware installation, software commissioning and testing, acceptance testing,
maintenance and troubleshooting. Based on the HCNA examination, HCNP examination
add the containts below: basic signaling process of the WCDMA system, the M2000 and
CME-related product knowledge, data configuration, software commissioning of site
controler, site software upgrades.

3.2.3.3 Exam results valid period

This exam result is valid for 3 years.

3.2.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

3.2.3.5 Key Points of Exam

Principles
1. WCDMA system architecture ,The basic principle of WCDMA and the wireless network
interface
2. The signaling process of the WCDMA system

59
Huawei Certification Exam Outline (Partner)

Product knowledge
1. BSC6900 (WCDMA) system introduction, hardware architecture and product
specifications
2. Typical configuration of BTS3900/DBS3900 (WCDMA),BTS3900/DBS3900 (WCDMA)
hardware architecture and module functions
3. Typical configuration of BTS3900/DBS3900 (MBTS), hardware architecture and
module functions
4. CME configuration tool principles and operational guidance
5. The M2000 system architecture and operating instructions

Engineering survey and hardware installation


1. Installation design and Engineering survey (product knowledge)
1) Site Controller and site installation
2) Engineering survey process of controller
3) Engineering survey process of site
2. Hardware Installation
1) Hardware Installation of site controller
2) Hardware Installation of site (including feeder system, monitoring, and other
peripherals)

Software Conmmissioning
1. Remote/Local commissioning of the site
2. Site service testing and site integration
3. Testing indicators and testing tool
4. Data configuration(site controller and site)
5. Software commissioning of the controller
6. New site integration through M2000

Acceptance testing
1. Acceptance of a single-site and hardware installation check
2. Acceptance process of controller

Software Upgrade
1. Remote upgrade of the site
2. Local upgrade of the site

Maintenance and troubleshooting


1. Hardware Replacement
2. Information collection for controller
3. Deal with problems on site for controller
4. On-site emergency recovery for controller

60
Huawei Certification Exam Outline (Partner)

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

3.2.3.6 Participating in the Exam

3.2.3.7 References

3.2.3.8 Recommended Training Program

Huawei Certified Network Professional-Huawei WCDMA Technologies and Device


BOM Training Program Level Duration

Huawei Certified Network Professional-Huawei WCDMA


88980027 III 13
Technologies and Device

61
Huawei Certification Exam Outline (Partner)

3.3 CDMA Exam Outline


3.3.1 Introduction of CDMA Exam Outline

Exam Pass
Certificate Exam Name Exam Code Exam Name Item number Total Score
Duration Score
HCNA-CDMA 60 multiple-choice
(Huawei Certified questions (single-answer
HCNA-CDMA HC-035-440-ENU 90min 1000 600
Network and multiple-answer),
Associate-CDMA) true-false questions
HCNP-CDMA 60 multiple-choice
(Huawei Certified questions (single-answer
HCNP-CDMA HC-035-441-ENU 90min 1000 600
Network and multiple-answer),
Professional-CDMA) true-false questions

3.3.2 Huawei Certified Network Associate-CDMA Exam Outline

3.3.2.1 Prerequisites

No prerequisites.

3.3.2.2 Exam Content Overview

CDMA sub-contractors examination involved: cdma2000 1X & 1xEV-DO technology base


of knowledge, the technical characteristics and network structure of Trustar digital trunking
communication system, the transmission basic priciple and related products hardware
basic knowledge , hardware installation skill, basic maintenance knowledge.

3.3.2.3 Exam results valid period

This exam result is valid for 3 years.

3.3.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

3.3.2.5 Key Points of Exam

Principles
1. cdma2000 1X & 1xEV-DO basic technology (CDMA technology development road
signpostf cdma2000 1X/1xEV-DO technical characteristics and network structure,
key technology of cdma2000 1X and UM channel IntroductionEVDO new
technologies and UM channel Introduction) ;
2. The technical characteristics and network architecture of the the Trustar digital

62
Huawei Certification Exam Outline (Partner)

trunking communication system ;


Product knowledge
1. BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts products(hardware
components, the basic configuration rules and board function.);
2. The meaning of the BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts
products, the meaning of its board indicator light;
3. BTS3900/BTS36xx series of CDMA base station antenna and feeder cable
introduction (basic knowledge of radio waves, the basic principles of antenna radiation
of electromagnetic waves, introduced the concept of the antenna transmission cable,
the base station antenna and feeder cable systems) ;
4. The introduction of complementary products (room environment of the project site, the
power system , alarm boxes, etc.) ;
5. The controller and bts products survey content and survey Note;
6. The bts hardware distribution, delivery rules, methods, understanding Huawei BOQ
and the meaning of the packing list;
7. Controller and base station hardware installation and the Power On Self Test;

Data configuration and commissioning


NA

Acceptance Test
1. The BTS hardware installation quality inspection content and standards;
2. Grasp the power meter, sitemaster ,test terminal use method;

Chinese Edition adds the following:


1. The BSC hardware installation quality inspection content and standards;

Maintenance and Troubleshooting


1. Grasp the replacement method and operation procedure of
BSC6680/BSC6600/RAC6610/MSE9830 boardframe etc.
1. Grasp the replacement method and operation procedure of BTS36xx/39xx serial bts
boardBBU etc.

NOTE
The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

3.3.2.6 Participating in the Exam

3.3.2.7 References

The exam is delivered by Pearosn VUE authorized test centers.You can register with the

63
Huawei Certification Exam Outline (Partner)

nearest test center to take the exam.


To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :http://www.vue.com/vtclocator/

3.3.2.8 Recommended Training Program

Huawei Certified Network Associate-Huawei CDMA Technologies and Device

BOM Training Program Level Duration


7 7.5
working
Huawei Certified Network Associate-Huawei CDMA
88980028 II days no
Technologies and Device
practice

3.3.3 Huawei Certified Network Professional-CDMA Exam


Outline

3.3.3.1 Prerequisites

No prerequisites.

3.3.3.2 Exam Content Overview

CDMA sub-contractors examination involved: cdma2000 1X & 1xEV-DO technology base


of knowledge, the technical characteristics and network structure of Trustar digital trunking
communication system, the transmission basic priciple and related products hardware
basic knowledge , hardware installation skill, basic maintenance
knowledge,commissioning,acceptance.

3.3.3.3 Exam results valid period

This exam result is valid for 3 years.

3.3.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

64
Huawei Certification Exam Outline (Partner)

3.3.3.5 Key Points of Exam

Principles
1. cdma2000 1X & 1xEV-DO basic technology (CDMA technology development road
signpostf cdma2000 1X/1xEV-DO technical characteristics and network structure,
key technology of cdma2000 1X and UM channel IntroductionEVDO new
technologies and UM channel Introduction) ;
2. The technical characteristics and network architecture of the the Trustar digital
trunking communication system ;
3. Grasp transmission fundamentals (TCPIP protocol and subnetting, Ethernet / VLAN /
VRRP / Routing Fundamentals) ;

Product knowledge
1. BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts products(hardware
components, the basic configuration rules and board function.);
2. The meaning of the BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts
products, the meaning of its board indicator light;
3. BTS3900/BTS36xx series of CDMA base station antenna and feeder cable
introduction (basic knowledge of radio waves, the basic principles of antenna radiation
of electromagnetic waves, introduced the concept of the antenna transmission cable,
the base station antenna and feeder cable systems) ;
4. The introduction of complementary products (room environment of the project site, the
power system , alarm boxes, etc.) ;
5. The controller and bts products survey content and survey Note;
6. The bts hardware distribution, delivery rules, methods, understanding Huawei BOQ
and the meaning of the packing list;
7. Controller and base station hardware installation and the Power On Self Test;

Data configuration and commissioning


1. The BTS data and software loading process and methodology;
2. The BTS data configuration;
3. The BTS basic commissioning procedure;
4. The meaning of the BTS of the Engineering Indicators (VSWR, RSSIoutput power)
and test methodsFinish the BTS troubleshooting and quality inspection under the
guidance. ;
5. The BTS environment alarm configuration, debugging;
6. IP RAN network form and IPRAN BTS data configuration;

Chinese Edition adds the following


1. BSC6680 controller internal signals (signaling, traffic) processes procedure, the basic
rules of the system configuration;
2. Operation and maintenance system of BSC6680 (CDMA BSC6680 maintenance

65
Huawei Certification Exam Outline (Partner)

system agencies, system networking, maintenance system software structure, the


internal IP network, IP address planning) ;
3. BSC6680 data configuration (the basic configuration of BSC6680 system,, the file
loading procedure, the CDMA BSC6680 hardware, clock, interface, cell, carrier, and
cdma2000 1X/1xEV-DO business data configuration) ;
4. BSC6680 signaling procedure(voice, data services, short message, handoff signaling
process) ;
5. The BSC data configuration under IP RAN network;

Acceptance Test
1. The BTS hardware installation quality inspection content and standards;
2. The BTS software installation quality inspection content and standards;
3. Tthe LMT maintenance method of RSSI,VSWR, Transmit power tracing;
4. Single BTS acceptance range and standard;
5. Grasp the power meter, sitemaster ,test terminal use method;
6. The acceptance range and standard of BTS basic characteristics;

Chinese Edition adds the following:


1. The BSC hardware installation quality inspection content and standards;
2. The BSC software installation quality inspection content and standards;
3. The LMT maintenance method of signal tracing;
4. Single BSC acceptance range and standard;
5. The acceptance range and standard of BSC basic characteristics;

Maintenance and Troubleshooting


1. Grasp the replacement method of spare parts, clear procedure key points;
2. Familiar with some of the commonly used test tools (sitemaster, power meter, test
phone, etc.)
3. Familiar with the daily operation &maintenance of the 36xx/39xx Series BTS and
RAC6610/BSC6600/BSC6680 ,basic information collection methods, analysis and
process the common fault alarm base on online help;
4. Grasp MSE9830 board replacement methods, procedure and information collection
methods;
5. To understand the common fault scenarios of the 36xx/39xx Series bts, to grasp the
emergency fault information collection and recovery measures, quickly recovery
according the guidance;
6. The use method of FMA tools

NOTE
The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

66
Huawei Certification Exam Outline (Partner)

3.3.3.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :http://www.vue.com/vtclocator/

3.3.3.7 References

3.3.3.8 Recommended Training Program

Huawei Certified Network Professional-Huawei CDMA Technologies and Device

BOM Training Program Level Duration

5~16
working
Huawei Certified Network Professional-Huawei CDMA
88980029
Technologies and Device
III days no
practice

67
Huawei Certification Exam Outline (Partner)

3.4 Wimax Exam Outline


3.4.1 Introduction of Wimax Exam Outline

Pass
Certificate Exam Name Exam Code Exam Name Exam Duration Item number Total Score
Score
60 multiple-choice
HCNP-Wimax questions
(Huawei Certified (single-answer and
HCNP-Wimax HC-035-451-ENU 90 min 1000 600
Network multiple-answer),
Professional-Wimax)) true-false questions

3.4.2 Huawei Certified Network Professional-Wimax Exam


Outline

3.4.2.1 Prerequisites

No prerequisites.

3.4.2.2 Exam Content Overview

The HCNP-Wimax exam covers WiMAX basic description, Wimax hardware description,
Wimax commission, Wimax Acceptance. Wimax maintaince

3.4.2.3 Exam results valid period

This exam result is valid for 3 years.

3.4.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

3.4.2.5 Key Points of Exam

WiMAX basic description


1. Describe OFDM/OFDMA Basics
2. Describe WiMAX Features
3. Describe WiMAX Applications
4. Describe WiMAX system networking

WiMAX product description


1. Describe each board function of DBS3900 WiMAX

68
Huawei Certification Exam Outline (Partner)

2. Complete the inside connection of DBS3900


3. Describe WiMAX system networking
4. Outline DBS3900 WiMAX functions
5. Outline each board function of DBS3900 WiMAX

WiMAX installing description


1. Describe How to install DBS3900 in site
2. Describe how to install Antena system

Wimax commission
1. Finish basic data configuration for WiMAX DBS3900
2. Describe the two types of commissioning
3. Perform local commissioning
4. Perform remote commissioning

Wimax Acceptance
1. Finish bacis function Acceptance.
2. Can be done Deriver test

Wimax maintaince
1. Complete daily maintenance tasks
2. Can be change board basicly

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

3.4.2.6 Participating in the Exam

3.4.2.7 References

Huawei Certified Wimax Training Courses WIMAX: Huawei Network Technology and
Device (HNTD)
Huawei Certified Wimax Training Courses WIMAX: Guide to Experiments on Huawei
Network Technology and Device (HNTD)
Huawei product manuals

3.4.2.8 Recommended Training Program

HCNP-Wimax (Huawei Certified Network Professional-Huawei Wimax Technologies and


Device) Training.
BOM Training Program Level Duration

HCNP-Wimax (Huawei Certified Network Professional-Huawei


88980030 II 8
Wimax Technologies and Device) Training.

69
Huawei Certification Exam Outline (Partner)

3.5 LTE Certification Exam Outline


3.5.1 Introduction of LTE Certification

Exam Total Pass


Certificate Exam Name Exam Code Exam Name Item number
Duration Score Score
60 multiple-choice
questions
HCNA-LTE
Huawei Certified (single-answer
(Huawei Certified 90
Network HCNA-LTE HC-411-ENU/HC-031-411-ENU and 1000 600
Network Associate minutes
Associate - LTE multiple-answer),
LTE)
true-false
questions
60 multiple-choice
HCNP-LTE questions
Huawei Certified
(Huawei Certified (single-answer
Network 90
HCNP-LTE HC-031-421-ENU Network and 1000 600
Professional - minutes
Professional multiple-answer),
LTE
LTE) true-false
questions
60 multiple-choice
HCNP-EPC questions
Huawei Certified
(Huawei Certified (single-answer
Network 90
HCNP-EPC HC-031-431-ENU Network and 1000 600
Professional - minutes
Professional multiple-answer),
EPC
EPC) true-false
questions

3.5.2 Huawei Certified Network Associate LTE (HCNA-LTE)


Exam Outline

3.5.2.1 Prerequisites

No prerequisites.

3.5.2.2 Exam Content Overview

The HCNA-LTE exam covers LTE system basics such as E-UTRAN/EPC architecture,
principles of OFDM/OFDMA/SC-FDMA, EPC basic principles and HUAWEI LTE eNodeB
products overview.

3.5.2.3 Exam results valid period

This exam result is valid for 3 years.

3.5.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
Huawei Certified
technology
Network Associate - LTE
Pass any subject of the high-level certification in the field of the local
technology

70
Huawei Certification Exam Outline (Partner)

3.5.2.5 Key Points of Exam

LTE System Overview


1. Evolution of Cellular Networks
2. 3GPP Releases
3. E-UTRAN Architecture
4. E-UTRAN Interfaces and Protocols
5. EPC Architecture
6. EPC Interfaces and Protocols
7. Radio Interface Techniques
8. Principles of OFDM
9. LTE Channel Structures
10. LTE Frame Structure
11. Downlink OFDMA
12. Uplink SC-FDMA
13. Multiple Input Multiple Output
14. Multimedia Broadcast Multicast Service
15. The Huawei eNodeB family
16. Products and application scenarios
17. Operation and Maintenance

EPC Principle
1. EPC architecture
2. Function of each node in EPC
3. The protocol and interface used in EPC (GTP, PMIP, diameter, etc.)
4. PDN connection
5. EPC bearers and TFT(s)
6. Identifiers and legacy IDs
7. Security mechanisms in EPC
8. QoS in EPC
9. The selection function in EPC
10. Attach and detach procedure
11. Tracking area update procedure
12. Handover procedure
13. Bearer activation/modification/deactivation procedure

The exam content provided here serves only as a general guide to candidates. Other basic knowledge not
mentioned here may also be included in the actual exam.

3.5.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the

71
Huawei Certification Exam Outline (Partner)

nearest test center to take the exam.


To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

3.5.2.7 References

<<LTE System Overview>>


<<LTE Field Maintenance>>
<<EPC Principle>>

3.5.2.8 Recommended Training Program

HCNA-LTE (Huawei Certified Network Associate-LTE) Training.


BOM Training Program Level Duration

88980001 Huawei Certified Network Associate-LTE II 6 days

3.5.3 Huawei Certified Network Professional LTE (HCNP-LTE)


Exam Outline

3.5.3.1 Prerequisites

No prerequisites.

3.5.3.2 Exam Content Overview

The HCNP-LTE exam covers details principles of LTE air interface such as
OFDMA/SC-FDMA/LTE physical layers, LTE protocols and procedures such as EPS
interfaces/EPS protocols/RRC layer/RLC layer/MAC layer, HUAWEI LTE eNodeB
operation&maintenance/configuration/troubleshooting.

3.5.3.3 Exam results valid period

This exam result is valid for 3 years.

3.5.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Huawei Certified Pass any subject of the same level of certification in the field of the local
Network Professional - technology
LTE Pass any subject of the high-level certification in the field of the local
technology

72
Huawei Certification Exam Outline (Partner)

3.5.3.5 Key Points of Exam

LTE Air Interface


1. Radio Interface Techniques
2. Transmission Modes
3. Spectrum Usage
4. Channel Coding in LTE
5. Principles of OFDM
6. LTE Physical Layer
7. The Uu Interface
8. LTE Radio Interface Protocols
9. LTE Channel Structure
10. LTE Frame Structure
11. OFDM Signal Generation
12. Downlink OFDMA
13. LTE Physical Signals
14. Downlink Reference Signals
15. Downlink LTE Physical Channels
16. Downlink Control Signaling
17. LTE Cell Search Procedure
18. Uplink Transmission Technique
19. OFDMA Verses SC-FDMA
20. Uplink LTE Physical Channels
21. Timing Relationships
22. Uplink Reference Signals
23. Uplink Control Signaling
24. LTE Random Access Procedure
25. Uplink Power Control
26. Paging Procedures
27. HARQ Operation
28. Diversity Options
29. Scheduling Principles and Signaling
30. Intra LTE Mobility

LTE Protocols and Procedures


1. EPS Architecture
2. EPS Network Elements
3. EPS Interfaces
4. EPS Protocols
5. EPS Signaling
6. EPS Protocols
7. E-UTRAN Channel Mapping

73
Huawei Certification Exam Outline (Partner)

8. EPS Bearer Services and E-UTRA Radio Bearers


9. E-UTRA Radio Bearers
10. RRC Structure
11. RRC States
12. RRC Services
13. PDCP Operation
14. RLC Functions
15. RLC Modes and Formatting
16. MAC Functions
17. MAC Architecture
18. MAC Formatting
19. X2AP Functions and Procedures
20. S1AP Functions and Procedures
21. User Plane GTP Functions and Procedures
22. X2 Handover
23. S1 Handover
24. Inter RAT Handover

LTE Operation and Configuration


1. eNodeB System Overview
2. eNodeB System Structure
3. eNodeB Auxiliary Devices
4. eNodeB Typical Networking
5. Structure of operation and maintenance system
6. Login eNodeB O&M system
7. eNodeB equipment management
8. eNodeB transport management
9. eNodeB radio management
10. Backup eNodeB configuration file, query eNodeB version
11. Tracing and real time monitoring
12. eNodeB Data Configuration Introduction
13. Preparing eNodeB Data
14. Creating eNodeB Data
15. Adjusting eNodeB Data
16. Checking eNodeB Data
17. eNodeB Commissioning Overview
18. eNodeB Remote Commissioning on the M2000
19. SUMMARY introduction
20. Creating bulk eNodeBs with Summary
21. Checking data

74
Huawei Certification Exam Outline (Partner)

LTE Reconfiguration
1. Adding an FDD Cell
2. Changing the Cell Bandwidth
3. Adding an MME Connection
4. Adding an S-GW Connection
5. Changing the Cell EARFCNs
6. Changing the Cell PCI
7. Changing the Cell ID
8. Relocating an MME
9. Relocating an S-GW

LTE Troubleshooting
1. The procedure of eNodeB troubleshooting flow
2. The alarm management and analysis
3. The log collection
4. The main faults processing of device level
5. The main faults processing of transport level
6. The main faults processing of radio level

The exam content provided here serves only as a general guide to candidates. Other basic knowledge not
mentioned here may also be included in the actual exam.

3.5.3.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

3.5.3.7 References

<<LTE Air Interface>>


<<LTE Protocols and Procedures>>
<<LTE Operatoin and Configuration>>
<<LTE Reconfiguration>>
<<LTE Troubleshooting>>

3.5.3.8 Recommended Training Program

HCNA-LTE (Huawei Certified Network Associate-LTE) Training.

75
Huawei Certification Exam Outline (Partner)

BOM Training Program Level Duration


88980002 Huawei Certified Network Professional-LTE III 10 days

3.5.4 Huawei Certified Network Professional EPC


(HCNP-EPC) Exam Outline

3.5.4.1 Prerequisites

No prerequisites.

3.5.4.2 Exam Content Overview

The HCNP-EPC exam covers details of EPC ATCA Platform Routine Operation and
Maintenance USNHSS, EPC USN Data Configuration, EPC UGW Routine Operation
and Maintenance, EPC UGW Data Configuration, EPC HSS Data Configuration.

3.5.4.3 Exam results valid period

This exam result is valid for 3 years.

3.5.4.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Huawei Certified Pass any subject of the same level of certification in the field of the local
Network Professional - technology
EPC Pass any subject of the high-level certification in the field of the local
technology

3.5.4.5 Key Points of Exam

EPC ATCA Platform Routine Operation and Maintenance USNHSS


1. system structure and hardware structure of USN9810
2. software related installation and upgrade procedure
3. hardware operation and maintenance
4. security management
5. system information management
6. alarm management
7. trace management
8. data management
9. license management
10. performance management

76
Huawei Certification Exam Outline (Partner)

EPC USN Data Configuration


1. functions of protocol stacks of different interfaces
2. configuration of USN hardware
3. S1-MME Interface Data Configuration
4. S6a Interface Data Configuration
5. S10S11 Interface Data Configuration
6. MM SM Data Configuration

EPC UGW Routine Operation and Maintenance


1. system structure and hardware structure of UGW9811
2. software related installation and upgrade procedure
3. hardware operation and maintenance
4. authorization management
5. system information management
6. alarm management
7. trace management
8. log management
9. license management
10. patch management
11. data backup and restore

EPC UGW Data Configuration


1. functions of protocol stacks of different interfaces
2. UGW9811 S1-U interface data
3. UGW9811 S11 interface data configuration
4. UGW9811 S5/S8 interface data
5. UGW9811 other related interface data configuration
6. UGW9811 APN data configuration
7. UGW9811 VPN data configuration.
8. UGW9811 billing data configuration.

EPC HSS Data Configuration


1. HSS9820 product function and application
2. configuration of subscription data
3. the steps of HSS9820 data configuration
4. hardware and system data configuration
5. interface data configuration
6. basic data configuration steps of USCDB

The exam content provided here serves only as a general guide to candidates. Other basic knowledge not
mentioned here may also be included in the actual exam.

77
Huawei Certification Exam Outline (Partner)

3.5.4.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

3.5.4.7 References

<< EPC ATCA Platform Routine Operation and MaintenanceUSNHSS>>


<< EPC USN Data Configuration >>
<< EPC UGW Routine Operation and Maintenance >>
<< EPC UGW Data Configuration >>
<< EPC HSS Data Configuration >>

3.5.4.8 Recommended Training Program

HCNP-EPC (Huawei Certified Network Professional -EPC) Training.

BOM Training Program Level Duration

88980003 Huawei Certified Network Professional-EPC III 12 days

78
Huawei Certification Exam Outline (Partner)

4 RNP&RNO
4.1 GSM RNP&RNO Exam Outline
4.1.1 Introduction of GSM RNP&RNO Exam Outline

Pass
Certificate Exam Name Exam Code Exam Name Exam Duration Item number Total Score
Score
HCNA GSM RNP&RNO 60 multiple-choice
HCNA GSM (Huawei Certified questions
RNP&RNO HC-035-510-ENU Network 90min (single-answer and 1000 600
Associate-CDMA multiple-answer),
RNP&RNO) true-false questions
60 multiple-choice
Huawei Certified
questions
HCNP GSM Network
HC-035-511-ENU 90min (single-answer and 1000 600
RNP&RNO Professional-GSM
multiple-answer),
RNP&RNO
true-false questions

4.1.2 Huawei Certified Network Associate-GSM RNP&RNO


Exam Outline

4.1.2.1 Prerequisites

No prerequisites.

4.1.2.2 Exam Content Overview

The HCNA GSM RNP&RNO exam covers: GSM basic theories, wireless transmission
principle, telecomunicatios principle, GSM network planning and optimization knowledges.

4.1.2.3 Exam results valid period

This exam result is valid for 3 years.

4.1.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

4.1.2.5 Key Points of Exam

Principle
1. Understandable of the GSM basic theories /wireless transmission /telecomunicatios as
well as attenna and associated parameters.

79
Huawei Certification Exam Outline (Partner)

Planning knowledges
1. Familiar with radio transmission theoretics and the usual transmission model.

Optimization knowledges
1. Capable of independently writing the analysis of electromagnetic interference, and
providing preliminary resolutions for the target area accordingly.
2. Capable of independently finishing site survey and report upon request.
3. Capable of independently using related tools to survey radio parameters and quality of
antenna.
4. Capable of independently accomplishing DT/CQT test (single site verification) by Genex
Porbe, analyzing the problems of DT/CQT by Genex Assistant and deliver resolutions
accordingly.
5. Capable of dealing with common customers complaint by DT/CQT.
6. Familiar with the meaning and adjusting regulations of commonly used Network Design
parameterss

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

4.1.2.6 Participating in the Exam

4.1.2.7 References

4.1.2.8 Recommended Training Program

HCNA GSM RNP&RNO (Huawei Certified Network Associate-Huawei GSM RNP&RNO


Technologies)
BOM Training Program Level Duration

HCNA GSM RNP&RNO (Huawei Certified Network


88980031 II 7
Associate-Huawei GSM RNP&RNO Technologies)

4.1.3 Huawei Certified Network Professional-GSM RNP&RNO


Exam Outline

4.1.3.1 Prerequisites

Have qualifications for HCNA-Huawei GSM RNP&RNO Technologies.

4.1.3.2 Exam Content Overview

The HCNP-GSM RNP&RNO exam covers: GSM communication theory, GSM network
planning and optimization process, GSM network planning and optimization knowledges.

80
Huawei Certification Exam Outline (Partner)

4.1.3.3 Exam results valid period

This exam result is valid for 3 years.

4.1.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

4.1.3.5 Key Points of Exam

Principle
1. Familiar with GSM communication theory.
2. Master wireless network planning and optimazition process.

Planning knowledges
1. Master the GSM coverage planning, capacity planning, neighbor/frequency design,
location area design, parameters design and GPRS planning.
2. Master the related parameters and adjusting regulations of Network Design.
3. Master the way of CW testing and related data processing.
4. Master the corrective procedure of transmission model.

Optimization knowledges
1. Master the RF optimazition & procedure, methods and tools, capable of processing
GSM radio network RF optimazition.
2. Master the definition of traffic statistics and counter point in the wireless side of GSM
Network.
3. Master GSM common KPI analysis and network problem solution, such as drop call,
handover, voice quality and data traffic.
4. Capable of independently completing network optimazition reports and generating
problem analysis reports

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

81
Huawei Certification Exam Outline (Partner)

4.1.3.6 Participating in the Exam

4.1.3.7 References

4.1.3.8 Recommended Training Program

HCNP-GSM RNO&RNP (Huawei Certified Network Professional-Huawei GSM RNP&RNO


Technologies).
BOM Training Program Level Duration

HCNP-GSM RNO&RNP (Huawei Certified Network


88980032 III 8
Professional-Huawei GSM RNP&RNO Technologies).

82
Huawei Certification Exam Outline (Partner)

4.2 WCDMA RNP&RNO Exam Outline


4.2.1 Introduction of WCDMA RNP&RNO Exam Outline

Exam Pass
Certificate Exam Name Exam Code Exam Name Item number Total Score
Duration Score
60 multiple-choice
questions
HCNA WCDMA Huawei Certified Network
HC-035-520-ENU 90min (single-answer and 1000 600
RNP&RNO Associate-WCDMA multiple-answer),
RNP&RNO true-false questions
60 multiple-choice
Huawei Certified Network questions
HCNP WCDMA
HC-035-521-ENU Professional-WCDMA 90min (single-answer and 1000 600
RNP&RNO
RNP&RNO multiple-answer),
true-false questions

4.2.2 Huawei Certified Network Associate-WCDMA RNP&RNO


Exam Outline

4.2.2.1 Prerequisites

No prerequisites.

4.2.2.2 Exam Content Overview

The HCNA WCDMA RNP&RNO exam covers:WCDMA basic theories, wireless


transmission principle, telecommunication principle, WCDMA network planning and
optimization knowledges.

4.2.2.3 Exam results valid period

This exam result is valid for 3 years.

4.2.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

4.2.2.5 Key Points of Exam

Principle
1. Understandable of the WCDMA basic theories, wireless transmission,
telecomunications, attenna and associated parameters.

Planning knowledges
1. Master antenna selection.

83
Huawei Certification Exam Outline (Partner)

2. Initial grasp of network planning and optimization process, familiar with the site
survey, RF Tuning process.
3. Familiar with the theory of radio propagation and common propagation models.

Optimization knowledges
1. Independent output electromagnetic interference analysis, and existence of the
interference region is given a preliminary settlement proposals.
2. Be able to independently asked to complete the site investigation and reporting.
3. Be able to use the tools to verify the wireless working parameters and the quality of
the antenna and cable correction.
4. Be able to independently use the Genex Probe, completion of DT / CQT testing
(including single-station verification), Genex Assistant analysis of the problem in the
DT / CQT, the output of the corresponding solutions.
5. Deal with general customer complaints by DT / CQT.
6. Grasp the road test KPI the meaning and the testing method, independent
production test program and complete.
7. Master the cell parameters to verify the method, familiar with the meaning of the
parameters and adjust the basis of the common network rules

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

4.2.2.6 Participating in the Exam

4.2.2.7 References

4.2.2.8 Recommended Training Program

HCNA WCDMA RNP&RNO (Huawei Certified Network Associate-Huawei WCDMA


RNP&RNO Technologies).
BOM Training Program Level Duration
HCNP-GSM RNO&RNP (Huawei Certified Network
88980033 II 7
Professional-Huawei GSM RNP&RNO Technologies).

4.2.3 Huawei Certified Network Professional-WCDMA


RNP&RNO Exam Outline

4.2.3.1 Prerequisites

No prerequisites.

84
Huawei Certification Exam Outline (Partner)

4.2.3.2 Exam Content Overview

The HCNP-WCDMA RNP&RNO exam covers: WCDMA communication theory, WCDMA


network planning and optimization process, WCDMA network planning and optimization
knowledges.

4.2.3.3 Exam results valid period

This exam result is valid for 3 years.

4.2.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

4.2.3.5 Key Points of Exam

Principle
1. Familiar with the WCDMA communication theory.
2. Master the wireless network planning and optimization process

Planning knowledges
1. Master the UMTS coverage planning, capacity planning, and neighbor /
frequency planning, LAC planning, scrambling code planning.
2. Grasp the relevant parameters of the network planning and adjustment of principles.
3. Grasp the CW test method, the CW test data processing.
4. Master the propagation model calibration processes, methods

Optimization knowledges
1. Master the RF optimization of processes, methods, tools, with network RF
optimization capabilities.
2. Master the definition of traffic statistics and counter point in the wireless side of GSM
Network.
3. To master the problems of the common words of WCDMA system KPI analysis and
network processing, familiar, then the system KPIs (Access, retention and
mobility)optimization method.
4. Familiar with Huawei UMTS RNC maintenance operations.
5. Able to independently finish the network optimization reporting and problem
analysis report writing

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

85
Huawei Certification Exam Outline (Partner)

4.2.3.6 Participating in the Exam

4.2.3.7 References

4.2.3.8 Recommended Training Program

HCNP-WCDMA RNO&RNP (Huawei Certified Network Professional-Huawei WCDMA


RNP&RNO Technologies).
BOM Training Program Level Duration

HCNP-GSM RNO&RNP (Huawei Certified Network


88980034 III 11
Professional-Huawei GSM RNP&RNO Technologies).

86
Huawei Certification Exam Outline (Partner)

4.3 CDMA RNP&RNO Exam Outline


4.3.1 Introduction of CDMA RNP&RNO Exam Outline

Total Pass
Certificate Exam Name Exam Code Exam Name Exam Duration Item number
Score Score
60 multiple-choice
Huawei Certified
questions
HCNA CDMA Network
HC-035-540-ENU 90min (single-answer and 1000 600
RNP&RNO Associate-CDMA
multiple-answer),
RNP&RNO
true-false questions
60 multiple-choice
Huawei Certified
questions
HCNP CDMA Network
HC-035-541-ENU 90min (single-answer and 1000 600
RNP&RNO Professional-CDMA
multiple-answer),
RNP&RNO
true-false questions

4.3.2 Huawei Certified Network Associate-CDMA RNP&RNO


Exam Outline

4.3.2.1 Prerequisites

No prerequisites.

4.3.2.2 Exam Content Overview

The HCNA CDMA RNP&RNO exam covers: CDMA basic theories, wireless transmission
principle, telecommunication principle. CDMA network planning and optimization
knowledges.

4.3.2.3 Exam results valid period

This exam result is valid for 3 years.

4.3.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

4.3.2.5 Key Points of Exam

Principle
1. Understandable of the CDMA basic theories /wireless transmission /telecomunications
as well as attenna and associated parameters.

Planning knowledges
1. Familiar with radio transmission theoretics and the usual transmission model.

87
Huawei Certification Exam Outline (Partner)

Optimization knowledges
1. Capable of independently writing the analysis of electromagnetic interference, and
providing preliminary resolutions for the target area accordingly.
2. Capable of independently finishing site survey and report upon request.
3. Capable of independently using related tools to survey radio parameters and quality of
antenna.
4. Capable of independently accomplishing DT/CQT test(single site verification) by
Pioneer, analyzing the problems of DT/CQT by Navigator and deliver resolutions
accordingly
5. Capable of dealing with common customers complaint by DT/CQT.
6. Familiar with the meaning and adjusting regulations of commonly used Network
Design parameters.

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

4.3.2.6 Participating in the Exam

4.3.2.7 References

4.3.2.8 Recommended Training Program

HCNA CDMA RNP&RNO (Huawei Certified Network Associate-Huawei CDMA RNP&RNO


Technologies) Training.
BOM Training Program Level Duration

HCNA CDMA RNP&RNO (Huawei Certified Network


88980035 II 8
Associate-Huawei CDMA RNP&RNO Technologies) Training.

4.3.3 Huawei Certified Network Professional-CDMA RNP&RNO


Exam Outline

4.3.3.1 Prerequisites

No prerequisites

4.3.3.2 Exam Content Overview

The HCNP CDMA RNP&RNO exam covers: CDMA communication theory, CDMA network
planning and optimizationprocess, CDMA network planning optimization knowledges.

88
Huawei Certification Exam Outline (Partner)

4.3.3.3 Exam results valid period

This exam result is valid for 3 years.

4.3.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

4.3.3.5 Key Points of Exam

Principle
1. Familiar with CDMA communication theory.
2. Master wireless network planning and optimazition process.

Planning knowledges
1. Master the elements which impact on coverage and capacity. Familiar with the basic
principle of power configuration.
2. Master the Network structure of multi-trxs , familiar with the theories of PN, LAC and
Neighbour design.
3. Master the way of CW testing and related data processing.
4. Master the corrective procedure of transmission model.
5. Master the related parameters and adjusting regulations of Network Design.

Optimization knowledges
1. Master the RF optimazition & procedure, methods and tools, capable of processing
GSM radio network RF optimazition.
2. Master the definition of traffic statistics and counter point in the wireless side of CDMA
Network.
3. Master CDMA common KPI analysis and network problem solution, such as drop call,
handover, voice quality and data traffic .
4. Familiar with operating on HUA WEI CDMA BSCs flatform;
5. Capable of independently completing network optimazition reports and generating
problem analysis reports

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

89
Huawei Certification Exam Outline (Partner)

4.3.3.6 Participating in the Exam

4.3.3.7 References

4.3.3.8 Recommended Training Program

HCNP-CDMA RNO&RNP (Huawei Certified Network Professional-Huawei CDMA


RNP&RNO Technologies).
BOM Training Program Level Duration

HCNP-CDMA RNO&RNP (Huawei Certified Network


88980036 III 8
Professional-Huawei CDMA RNP&RNO Technologies).

90
Huawei Certification Exam Outline (Partner)

4.4 Microwave RNP Exam Outline


4.4.1 Introduction of RNP Exam Outline

Total Pass
Certificate Exam Name Exam Code Exam Name Exam Duration Item number
Score Score
60 multiple-choice
Huawei Certified questions
HCNA
Network (single-answer and
Microwave HC-035-550-ENU 90 min 1000 600
Associate-Microwave multiple-answer),
RNP
RNP true-false questions

60 multiple-choice
Huawei Certified questions
HCNP
Network (single-answer and
Microwave HC-035-551-ENU 90 min 1000 600
Professional-Microwave multiple-answer),
RNP
RNP true-false questions

4.4.2 Huawei Certified Network Associate-Microwave RNP


Exam Outline

4.4.2.1 Prerequisites

No prerequisites.

4.4.2.2 Exam Content Overview

The HCNA-MRNP exam covers Digital microwave communication principle, application of


Pathloss, Microwave LOS Survey method and procedure, Fundamentals of Microwave
Network Planning and Design.

4.4.2.3 Exam results valid period

This exam result is valid for 3 years.

4.4.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

4.4.2.5 Key Points of Exam

Digital Microwave communication principle


1. The detail of digital microwave and features
2. The function of microwave components
3. Common networking scheme and applications scenarios

91
Huawei Certification Exam Outline (Partner)

4. Microwave radiation fundamental and fading description


5. Various anti-fading technology
6. Microwave link design procedure and key points

Applications of Pathloss and LOS survey


1. Basic operation of Pathloss
2. LOS survey scenarios and evaluation method
3. LOSsurvey procedure

Networking planning and design


1. Microwave planning and design knowledege
2. HUAWEI microwave planning&design procedure

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

4.4.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

4.4.2.7 References

Huawei microwave products manuals(RTN600,RTN900 series)

4.4.2.8 Recommended Training Program

Huawei Certified Network Associate-Huawei Microwave RNP Technologies training.


BOM Training Program Level Duration
Huawei Certified Network Associate-Huawei Microwave RNP
88980037 II 3
Technologies training.

4.4.3 Huawei Certified Network Professional-Microwave RNP


Exam Outline

4.4.3.1 Prerequisites

No prerequisites.

92
Huawei Certification Exam Outline (Partner)

4.4.3.2 Exam Content Overview

The HCNP-MRNP exam covers microwave frequency planning,interference analysis


planning and design procedure, and basic Ethernet network knowledge.

4.4.3.3 Exam results valid period

This exam result is valid for 3 years.

4.4.3.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

4.4.3.5 Key Points of Exam

Microwave frequency planning, interference analysis


1. The meaning of frequency planning
2. The regulations of microwave selection
3. Frequency planning by Pathloss
4. Interference analysis by Pathloss

Microwave networking planning and design


1. The process of microwave planning and design
2. Frequency and equipment selection during planning

Datacom knowledge
1. TCP/IP model
2. IP address classification and IP route basis
3. The work mechanism of LAN and WAN
4. 802.1Q and QinQ

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

4.4.3.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :

93
Huawei Certification Exam Outline (Partner)

http://www.vue.com/vtclocator/

4.4.3.7 References

Huawei microwave products manuals(RTN600,RTN900 series)


Digital microwave communication principle

4.4.3.8 Recommended Training Program

Huawei Certified Network Professional-Huawei Microwave RNP Technologies Trainning


BOM Training Program Level Duration

Huawei Certified Network Professional-Huawei Microwave RNP


88980038 III 3
Technologies Trainning

94
Huawei Certification Exam Outline (Partner)

5 Energy&Infrastructure
5.1 Site and Power Exam Outline
5.1.1 Introduction of Site and Power Exam Outline

Exam Total Pass


Certificate Exam Name Exam Code Exam Name Item number
Duration Score Score
60 multiple-choice
Huawei Certified
HCNA questions (single-answer
Network
Primary HC-035-610-ENU 90 min and multiple-answer), 1000 600
Associate-Primary
Power System true-false questions
Power System

5.1.2 Huawei Certified Network Associate-Site and Power


Exam Outline

5.1.2.1 Prerequisites

No prerequisites.

5.1.2.2 Exam Content Overview

The SITE AND POWER SYSTEM exam covers Basic Knowledge of Power Distribution for
Telecom Power System, Battery Introduction and Application,ITS1000M and Power3000
product, installation, operations, maintenance, troubleshooting and Neteco knowledge.

5.1.2.3 Exam results valid period

This exam result is valid for 3 years.

5.1.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

5.1.2.5 Key Points of Exam

Basic Knowledge of Power Distribution for Telecom Power System


1. Basic Concepts about Power Distribution
2. Low-Voltage Electrical Devices
3. Power Distribution design inside the Power System
4. Power Distribution products description

95
Huawei Certification Exam Outline (Partner)

Battery Introduction and Application


1. Battery Brief introduction
2. Battery Terms
3. Battery Application Selection
4. Battery Operation and Maintenance

Product Knowledge
1. ITS1000M and Power3000 product features
2. ITS1000M and Power3000 operations, maintenance and troubleshooting

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

5.1.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

5.1.2.7 References

Huawei product manuals

5.1.2.8 Recommended Training Program

Huawei Certified Network Associate-Huawei Primary Power System Technologies and


Device Training
BOM Training Program Level Duration

Huawei Certified Network Professional-Huawei Microwave RNP


88980039 II 9
Technologies Trainning

96
Huawei Certification Exam Outline (Partner)

5.2 Hybrid Power Supply Exam Outline


5.2.1 Introduction of Hybrid Power Supply Exam Outline

Exam Total Pass


Certificate Exam Name Exam Code Exam Name Item number
Duration Score Score
60 multiple-choice
Huawei Certified questions
HCNA Hybrid Network (single-answer and
HC-035-620-ENU 90 min 1000 600
Power Supply Associate-Hybrid Power multiple-answer),
Supply true-false questions

5.2.2 Huawei Certified Network Associate-Hybrid Power


Supply Exam Outline

5.2.2.1 Prerequisites

No prerequisites.

5.2.2.2 Exam Content Overview

The HYBRID POWER SUPPLY exam covers Basic Knowledge of Power Distribution for
Telecom Power System, Training for the Diesel Generator Set, Power1000 and Power2000
product, installation, operations, maintenance, troubleshooting and Neteco knowledge..

5.2.2.3 Exam results valid period

This exam result is valid for 3 years.

5.2.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

5.2.2.5 Key Points of Exam

Basic Knowledge of Power Distribution for Telecom Power System


1. Basic Concepts about Power Distribution
2. Low-Voltage Electrical Devices
3. Power Distribution design inside the Power System
4. Power Distribution products description

Training for the Diesel Generator Set


1. D&G System Introduction

97
Huawei Certification Exam Outline (Partner)

2. D&G Installation and Commissioning


3. D&G Maintenance,
4. D&G Troubleshooting
5. D&G Onsite Operation

Product Knowledge
1. Power1000 and Power2000 product features
2. Power1000 and Power2000 operations, maintenance and troubleshooting

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

5.2.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :
http://www.vue.com/vtclocator/

5.2.2.7 References

Huawei product manuals

5.2.2.8 Recommended Training Program

Huawei Certified Network Associate-Huawei Hybrid Power Supply Technologies and


Device Traing
BOM Training Program Level Duration
Huawei Certified Network Professional-Huawei Microwave RNP
88980040 II 9
Technologies Trainning

98
Huawei Certification Exam Outline (Partner)

6 Cloud
6.1 Cloud Computing Certification Exam Outline

6.1.1 Introduction of Cloud Computing Certification

Exam Total Pass


Certificate Exam Name Exam Code Exam Name Item number
Duration Score Score
60 multiple-choice
HCNA-HCTD
questions
(Huawei Certified
Huawei Certified (single-answer
HC-031-511-ENU Network
Network Associate - HCNA HCTD 90 min and 1000 600
Associate-Huawei Cloud
Cloud multiple-answer),
Technologies and
true-false
Device)
questions

6.1.2 Huawei Certified Network Associate-Huawei Cloud


Technologies and Device (HCNA-HCTD) Exam Outline

6.1.2.1 Prerequisites

No prerequisites.

6.1.2.2 Exam Content Overview

The HCNA-HCTD exam covers IT Foundation for Cloud Computing, Fundamentals of


Cloud Computing and Desktop Cloud Administration. Candidates who successfully pass
the exam will have the knowledge and capability to perform the revelant tasks for
SingleCLOUD products

6.1.2.3 Exam results valid period

This exam result is valid for 3 years.

6.1.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Huawei Certified Pass any subject of the same level of certification in the field of the local
Network Professional - technology
Cloud Pass any subject of the high-level certification in the field of the local
technology

6.1.2.5 Key Points of Exam

IT Foundation for Cloud Computing


1. Describe Active Directory Service.
2. Describe Dynamic Host Configuration Protocol.
3. Describe Domain Name Service.

99
Huawei Certification Exam Outline (Partner)

4. Describe the Linux File System Structure.


5. Performing Linux Directory Operations.
6. Performing Linux File Operations.
7. Administering User Account.
8. Performing System Resources Management.
9. Performing Basic Network Configuration.
10. Describe the hierarchical structure of an IP network and the functions of each
layerDatacom basics

Fundamentals of Cloud Computing


1. Describe Cloud Computing Use Cases.
2. Describe Cloud Computing Key Characteristics.
3. Describe the Basic Concepts of Server Virtualization.
4. Describe the Basic Concepts of Network Virtualization.
5. Describe the Basic Concepts of Storage Virtualization.
6. Describe the Basic Concepts of Cloud Storage.
7. Identify the Storage Access Protocols.
8. Describe the RAID Features.
9. Describe Backup and High Availability for Storage

Desktop Cloud Administration


1. Describe the Position of Galax in SingleCLOUD.
2. Describe the Components of Galax.
3. Describe the Features of Galax.
4. Describe the Server Architecture.
5. Describe the Server PCBs.
6. Describe the Server Switch PCB.
7. Describe the Server Management PCB.
8. Describe the Features of Server.
9. Describe the Features of Storage Product.
10. Describe the Storage Architecture.
11. Describe the Storage Specification.
12. Describe the Features of Switch Product.
13. Describe the Switch Architecture.
14. Describe the Switch Specification.
15. Describe Galax8800 Operating System.
16. Performing System Login.
17. Performing System Management.
18. Performing Server Management.
19. Performing System Configuration.
20. Performing Virtualization Operations.
21. Viewing System Message.
22. Viewing System Alert.
23. Viewing System Log.
24. Understand the Management Port Features.
25. Performing Common Management Tasks.
26. Understand OceanStor Management Port Features.
27. Understand OceanStor Management Features.
28. Performing Common OceanStor Management Tasks.
29. Understand Switch Management Port Features.
30. Understand Switch Management Features.

100
Huawei Certification Exam Outline (Partner)

31. Performing Common Switch Management Tasks.


32. Describe VDesktop6000 networking.
33. Describe VDesktop6000 structure and functions.
34. Describe VDesktop6000 service flow.
35. Perform VDesktop6000 count management.
36. Perform VDesktop6000 asset management.
37. Perform VDesktop6000 DDC management.
38. Perform VDesktop6000 system backup.
39. Perform VDesktop6000 performance management.
40. Describe TCs Terminal Types.
41. Describe TCs Characteristics.
42. Understand TC Configuration and Management.

The exam content provided here serves only as a general guide to candidates. Other basic knowledge not
mentioned here may also be included in the actual exam.

6.1.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.To find the Pearosn VUE authorized test centers,
please log on the homepage of the Pearson VUE : http://www.vue.com/vtclocator/

6.1.2.7 References

Huawei SingleCLOUD VDesktop6000 Product Documentation, V100R002C01


Other Huawei SingleCLOUD product manuals

6.1.2.8 Recommended Training Program

BOM Training Program Level Duration

88996127 IT Foundation for Cloud Computing Training I 2 days

88996126 Fundamentals of Cloud Computing Training I 2 days

88996129 Desktop Cloud Administration Training II 5 days

101
Huawei Certification Exam Outline (Partner)

7 Telecom Design and Implementation


7.1 Telecom Survey and Design Exam Outline
7.1.1 Introduction of Telecom Survey and Design Exam Outline

Exam Item Total Pass


Certificate Exam Name Exam Code Exam Name
Duration number Score Score

HCNA Huawei Certified Network


Telecommunication HC-035-810-ENU Associate-Telecommunication 90 min 60 1000 600
Equipment Survey equipment survey

7.1.2 Huawei Certified Network Associate-Telecom Survey and


Design Exam Outline

7.1.2.1 Prerequisites

No prerequisites.

7.1.2.2 Exam Content Overview

The SURVEY exam covers the skills and procedure of Huawei products survey.

7.1.2.3 Exam results valid period

This exam result is valid for 3 years.

7.1.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

7.1.2.5 Key Points of Exam

The process of survey and basic knowledge of telecom


Survey knowledge of core network products
1. Hardware structure and networking of core network products
2. Survey knowledge of core network products

Survey knowledge of wireless products


1. Hardware structure and networking of wireless products
2. Survey knowledge of wireless products

102
Huawei Certification Exam Outline (Partner)

Survey knowledge of network products


1. Hardware structure and networking of network products
2. Survey knowledge of network products

The exam content provided here serves only as a general guide to candidates. Other contents not
mentioned here may also be included in the actual exam.

7.1.2.6 Participating in the Exam

The examination is published by Pearson VUE Authorized Test Center. You can select the
nearest Pearson VUE Authorized Test Center Application and take the test.
For inquiries authorized test center information, please visit: http://www.pearsonvue.com.cn

7.1.2.7 References

Survey guide of Huawei products


Templates of survey reports
Installation manuals of Huawei products

7.1.2.8 Recommended Training Program

Huawei Certified Network Associate-Telecommunication Equipment Survey Technologies


Training
BOM Training Program Level Duration

Huawei Certified Network Associate-Telecommunication


88980041 II 3
Equipment Survey Technologies Training

103
Huawei Certification Exam Outline (Partner)

7.2 Hardware Installation Supervision (excluding RF


products)

7.2.1 Introduction of Enterprise Communiation Exam Outline

Exam Total Pass


Certificate Exam Name Exam Code Exam Name Item number
Duration Score Score
60 questions
Hardware (multiple-choices
Huawei Certified Network
Installation with single answer,
Associate-Hardware
Supervision HC-035-820-ENU 90minutes multiple-choices 1000 600
Installation Supervision
(excluding RF with multiple
(excluding RF products)
products) answers, or
true/false question)

7.2.2 Huawei Certified Network Associate-Hardware


Installation Supervision (excluding RF products)

7.2.2.1 Prerequisites

No prerequisites.

7.2.2.2 Exam Content Overview

The test involves basic theories about hardware. And the following subjects should be
mastered:
1) Introduction to EHS management during engineering delivery
2) Telecom installation specifications
3) Specifications on common tools and wireless products installation
4) Required knowledge about installability
5) User guide for common tools of communication project
6) MA5600 hardware installation guide (multimedia material)
7) SOP of OptiX OSN 3500
8) Guide to core network UMG8900 cabinet cascaded optical fiber installation
9) Core network hardware installation training
10) Specifications on installing and laying out cables
11) Cable connector production

7.2.2.3 Exam results valid period

This exam result is valid for 3 years.

7.2.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:

104
Huawei Certification Exam Outline (Partner)

Certificate Re-certification Methods


To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

7.2.2.5 Key Points of Exam

Principle
1. Master the principles and methods of hardware installation, and be skilled in making
various cables.

Product Knowledge
1. Hardware structure, features, and specifications of the products, material categories,
and the use of common instruments and tools

Instruments and Tools


1. Features and usage of instruments and tools

Quality Abnormality Handling


1. Master the quality verification of hardware installation and know how to handle quality
issues.

7.2.2.6 Participating in the Exam

This test is released by Pearson VUE Authorized Test Center. Candidates can choose the
nearest Pearson VUE Authorized Test Center to sign in and take the test.
Please log in to the following website for information about the authorized test center:
http://www.pearsonvue.com.cn

7.2.2.7 Reference

1) Introduction to EHS management during engineering delivery


2) Telecom installation specifications
3) Specifications on common tools and wireless products installation
4) Required knowledge about installability
5) User guide for common tools of communication project
6) MA5600 hardware installation guide
7) SOP of OptiX OSN 3500
8) Guide to core network UMG8900 cabinet cascaded optical fiber installation
(2008.05.20)
9) Core network hardware installation training
10) Specifications on installing and laying out cables
11) Cable connector production

105
Huawei Certification Exam Outline (Partner)

The document just provides a general guidance for candidates; therefore, the test may cover other
contents not mentioned in this document.

7.2.2.8 Recommended Training Program

BOM Training Program Level Duration


Huawei Certified Network Associate-Hardware Installation Supervision
88980042 II 5
(excluding RF products) Training

106
Huawei Certification Exam Outline (Partner)

7.3 Huawei Certified Network Professional -Hardware


Installation Supervision (including RF products)
7.3.1 Introduction of Enterprise Communiation Exam Outline

Exam Total Pass


Certificate Exam Name Exam Code Exam Name Item number
Duration Score Score

60 questions
Hardware
Huawei Certified Network (multiple-choices
Installation
Associate-Hardware with single answer,
Supervision HC-035-820-ENU 90minutes 1000 600
Installation Supervision multiple-choices with
(excluding RF
(excluding RF products) multiple answers, or
products)
true/false question)

7.3.2 Huawei Certified Network Professional-Hardware


Installation Supervision (including RF products)

7.3.2.1 Requirement for Candidates

No prerequisites.

7.3.2.2 Description of Test Content

The test involves basic theories about hardware. And the following subjects should be
mastered:
1) Introduction to EHS management during engineering delivery
2) Telecom installation specifications
3) Introduction to telecommunications room environment
4) Specifications on common tools and wireless products installation
5) Required knowledge about installability
6) Introduction to common instruments and tools
7) BTS3900 hardware architecture and principle
8) DBS3900 hardware architecture and principle
9) Antenna and feeder system installation (Chinese video)
10) Quick installation guide to base station swap V1.0
11) Multimedia training material of tower installation
12) Specifications on installing and laying out cables
13) Training materials for making cable connectors (outdoor)
14) Microwave product installation and commissioning
15) Work instructions for the delivery of microwave co-base stations

7.3.2.3 Exam results valid period

This exam result is valid for 3 years.

7.3.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:

107
Huawei Certification Exam Outline (Partner)

Certificate Re-certification Methods


To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

7.3.2.5 Test Points

Principle
1. Master the principles and methods of hardware installation, and be skilled in making
various cables.

Product Knowledge
1. Familiar with the special installation requirements for different scenarios and products

Quality Abnormality Handling


1. Master the quality verification of hardware installation and know how to handle quality
issues.

7.3.2.6 Test Participation

This test is released by Pearson VUE Authorized Test Center. Candidates can choose the
nearest Pearson VUE Authorized Test Center to sign in and take the test.
Please log in to the following website for information about the authorized test center:
http://www.pearsonvue.com.cn

7.3.2.7 Reference

1) Introduction to EHS management during engineering delivery


2) Introduction to telecommunications room environment
3) Telecom installation specifications
4) Specifications on common tools and wireless products installation
5) Required knowledge about installability
6) Introduction to common instruments and tools
7) BTS3900 hardware architecture and principle
8) DBS3900 hardware architecture and principle
9) Antenna and feeder system installation (Chinese video)
10) Quick installation guide to base station swap V1.0
11) Multimedia training material of tower installation
12) Specifications on installing and laying out cables
13) Training materials for making cable connectors (outdoor)
14) Microwave product installation and commissioning
15) Work instructions for the delivery of microwave co-base stations

108
Huawei Certification Exam Outline (Partner)

The document just provides a general guidance for candidates; therefore, the test may cover other
contents not mentioned in this document.

7.3.2.8 Recommended Training Program

BOM Training Program Level Duration

Huawei Certified Network Associate-Hardware Installation Supervision


88980043 II 6
(including RF products) Training

7.4 Huawei Certified-ODN Design Exam Outline


7.4.1 ODN Design Certification Exam Introduction

Certification Exam Total Pass


Exam Code Exam Name Item number
Program Duration Score Score
60 multiple-choice
questions
Huawei Certified-ODN
ODN Design HC-035-850-ENU 90 min (single-answer and 1000 600
Design Engineer
multiple-answer),
true-false questions

7.4.2 ODN Design Exam Outline

7.4.2.1 Prerequisites

No prerequisites.

7.4.2.2 Exam Content Overview

The ODN Design exam covers Introduction to the GPON Technology, Presentation to ODN
Products, ODN Survey, ODN Design, ODN Design Review, Optical Cable Product
Description, Optical Splitting Strategy, ODN Topology and Cable Route Design Criteria,
OLT Capacity and Coverage Design Principle and ODN Design for FTTx Customer.

7.4.2.3 Exam results valid period

This exam result is valid for 3 years.

7.4.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods

109
Huawei Certification Exam Outline (Partner)

To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

7.4.2.5 Key Points of Exam

Introduction to the GPON Technology


1. GPON development background and concept;
2. Optical network architecture;
3. GPON protocols;
4. The key technology of GPON;

Presentation to ODN Products


1. ODN product function modules;
2. ODN cabinet and box key technologies;
3. ODN identifier system;

ODN Survey
1. The basic workflow of ODN survey;
2. The basic methods of ODN survey;
3. The precautions of ODN survey;

ODN Design
1. The common solutions of ODN;
2. Input and output content of ODN design;
3. Workflow of ODN design;
4. Methods of ODN design;
5. Principles of ODN design;
6. Key points of ODN design;

ODN Design Review


1. The various components of ODN design;
2. Methods of how to review ODN design;
3. Key points and precautions of how to review ODNdesign;

Optical Cable Product Description


1. Different types of fiber optic cable applications;
2. The basic structure of the fiber optic cable;
3. Markers of different types of fiber optic cable;
4. The cable selection methods in different scenarios;

Optical Splitting Strategy


1. The characteristics of one-stage and two-stage splitting;
2. How to determine the splitting level according to different environment;
3. Laying position of the splitter;
4. The use of uneven splitter;
5. The best one-stage or two-stage splitting solution in the special scenarios;

ODN Topology and Cable Route Design Criteria


1. The common optical network topology;
2. Network topology classification and characteristics of each;
3. The optical cable route design standards;
4. Device location selection methods;

110
Huawei Certification Exam Outline (Partner)

OLT Capacity and Coverage Design Principle


1. The calculation methods of OLT capacity and coverage area ;
2. The bandwidth requirements of different services;
3. The Optical link loss calculation method;

ODN Design for FTTx Customer


1. ODN common solutions;
2. The basic structure of the optical access network;
3. The classification of different types of users;
4. The different bandwidth requirements of the business;
5. The ODN user-based design;

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

7.4.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :

http://www.vue.com/vtclocator/

7.4.2.7 References

FTTx PON Technology and Testing


Optical Access Network Planning and Design Manual
FTTx PON Technology and Application
Communication Lines Engineering

7.4.2.8 Recommended Training Program

Huawei Certified-ODN Design


Huawei Certified-ODN Implementation

7.5 Huawei Certified-ODN Implementation Exam Outline

7.5.1 ODN Implementation Certification Exam Introduction

111
Huawei Certification Exam Outline (Partner)

Certification Exam Total Pass


Exam Code Exam Name Item number
Program Duration Score Score
60 multiple-choice
questions
ODN Huawei Certified-ODN
HC-035-855-ENU 90 min (single-answer and 1000 600
Implementation Implementation engineer
multiple-answer),
true-false questions

7.5.2 ODN Implementation Exam Outline

7.5.2.1 Prerequisites

No prerequisites.

7.5.2.2 Exam Content Overview

The ODN Implementation exam covers Introduction to the GPON Technology, Presentation
to ODN Products, ODN Implementation, ODN Test, Optical Cable Product Description,
ODN Topology and Cable Route Design Criteria, Application of the Fiber-blowing
Technique in FTTx Projects, Application of the Micro Trench Technique in FTTx Projects,
Training on Duct Fiber Optical Cable Engineering and Training on Aerial Fiber Optical
Cable Engineering.

7.5.2.3 Exam results valid period

This exam result is valid for 3 years.

7.5.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

7.5.2.5 Key Points of Exam

Introduction to the GPON Technology


1. GPON development background and concept;
2. Optical network architecture;
3. GPON protocols;
4. The key technology of GPON;

Presentation to ODN Products


1. ODN product function modules;

112
Huawei Certification Exam Outline (Partner)

2. ODN cabinet and box key technologies;


3. ODN identifier system;

ODN Implementation
1. FTTX implementation workflow;
2. Optical cable laying;
3. Branch and connection of optical cable;
4. Equipment installation;

ODN Test
1. The ODN testing tools;
2. The critical physical parameters of ODN testing;
3. The ODN testing workflow;

Optical Cable Product Description


1. Different types of fiber optic cable applications;
2. The basic structure of the fiber optic cable;
3. Markers of different types of fiber optic cable;
4. The cable selection methods in different scenarios;

ODN Topology and Cable Route Design Criteria


1. The common optical network topology;
2. Network topology classification and characteristics of each;
3. The optical cable route design standards;
4. Device location selection methods;

Application of the Fiber-blowing Technique in FTTx Projects


1. Fiber-blowing technology;
2. Equipment and materials of fiber-blowing ;

Application of the Micro Trench Technique in FTTx Projects


1. Micro-trenching technology;
2. Applications of micro-trenching technology;

Training on Duct Fiber Optical Cable Engineering


1. Duct optical cable enginerring implementation;
2. Materials and tools of duct optical cable engineering;
3. Construction process and techniques of duct optical cable engineering;
4. Testing and acceptance of duct optical cable engineering;

Training on Aerial Fiber Optical Cable Engineering


1. Aerial optical cable enginerring implementation;
2. Materials and tools of aerial optical cable engineering;
3. Construction process and techniques of aerial optical cable engineering;
4. Testing and acceptance of aerial optical cable engineering;

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

7.5.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.

113
Huawei Certification Exam Outline (Partner)

To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :

http://www.vue.com/vtclocator/

7.5.2.7 References

FTTx PON Technology and Testing


Optical Access Network Planning and Design Manual
FTTx PON Technology and Application
Communication Lines Engineering

7.5.2.8 Recommended Training Program

Huawei Certified-ODN Design


Huawei Certified-ODN Implementation

7.6 Huawei Certified-OSP Design Exam Outline

7.6.1 OSP Design Exam Introduction

Certification Exam Total Pass


Exam Code Exam Name Item number
Program Duration Score Score
60 multiple-choice
questions
Huawei Certified-OSP
OSP Design HC-035-840-ENU 90 min (single-answer and 1000 600
Design Engineer
multiple-answer),
true-false questions

7.6.2 OSP Design Exam Exam Outline

7.6.2.1 Prerequisites

No prerequisites.

7.6.2.2 Exam Content Overview

The HC-OD exam covers optical communication principles, knowledge about optical
transmission network, knowledge about optical fiber and optical cable, picking proper

114
Huawei Certification Exam Outline (Partner)

optical fiber type for engineering construction, knowledge about principles for choosing
optical cable route, preventive and protective measures for optical calbe line, basic
knowledge about optical cable engineering construction.

7.6.2.3

7.6.2.4 Exam results valid period

This exam result is valid for 3 years.

7.6.2.5 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

7.6.2.6 Key Points of Exam

Optical fiber
1. The basic knowledge of optical fiber communication
2. The sorting and basic structure of optical fiber
3. The basic knowledge of optical fiber
4. The manufacture method of optical fiber

Optical cable
1. The basic knowledge of optical cable
2. The designing and structure of optical cable
3. Sort about optical cable
4. The choice of optical fiber type
5. The performance and test of optical cable

Design
1. The basic knowledge of optical fiber communication
2. Survey and design of direct buried optical cable engineering
3. Survey and design of Pipe optical fiber cable engineering
4. Survey and design of aerial optical fiber cable engineering
5. OSP technical proposal

Construction
1. Re-checking route
2. Checking single-drum optical cables and equipment
3. Making a project implementation plan
4. Route construction
5. Loading/unloading and transporting optical cables
6. Distributing and laying optical cables
7. Jointing and leading-in of optical cables and construction test
8. Transmission feature test of the optical repeating section

115
Huawei Certification Exam Outline (Partner)

9. Preparing completion documents


10. Project acceptance

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

7.6.2.7 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :

http://www.vue.com/vtclocator/

7.6.2.8 References

Huawei Certified OSP Design Courses Optical Cable Engineering Plan and Design
Huawei Certified OSP Design Courses Guide to Outdoor Optical Cable Engineering
Optical Fiber Communications
Optical Cable Product Manuals

7.6.2.9 Recommended Training Program

HC-OI (Huawei Certified OSP Implementation) Training.

7.7 Huawei Certified-OSP Implementation Exam Outline

7.7.1 OSP Implementation Exam Introduction

Certification Exam Total Pass


Exam Code Exam Name Item number
Program Duration Score Score
60 multiple-choice
questions
OSP
HC-035-845-ENU Huawei Certified-OSP 90 min (single-answer and 1000 600
Implementation Implementation Engineer multiple-answer),
true-false questions

116
Huawei Certification Exam Outline (Partner)

7.7.2 OSP Implementation Exam Outline

7.7.2.1 Prerequisites

No prerequisites.

7.7.2.2 Exam Content Overview

The HC-OD exam covers optical communication principles, knowledge about optical
transmission network, knowledge about optical fiber and optical cable, picking proper
optical fiber type for engineering construction, knowledge about principles for choosing
optical cable route, preventive and protective measures for optical calbe line, basic
knowledge about optical cable engineering construction, Be familiar with fusion and
mechanical splice methods; knowledge about making use of optical cable fusion splicer
and mechanical splicer to connect optical cable;

7.7.2.3 Exam results valid period

This exam result is valid for 3 years.

7.7.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

7.7.2.5 Key Points of Exam

Optical fiber
1. The basic knowledge of optical fiber communication
2. The sorting and basic structure of optical fiber
3. The basic knowledge of optical fiber
4. The manufacture method of optical fiber

Optical cable
1. The basic knowledge of optical cable
2. The designing and structure of optical cable
3. Sort about optical cable
4. The choice of optical fiber type
5. The performance and test of optical cable

117
Huawei Certification Exam Outline (Partner)

Design
1. The basic knowledge of optical fiber communication
2. Survey and design of direct buried optical cable engineering
3. Survey and design of Pipe optical fiber cable engineering
4. Survey and design of aerial optical fiber cable engineering
5. OSP technical proposal

Construction
1. Re-checking route
2. Checking single-drum optical cables and equipment
3. Making a project implementation plan
4. Route construction
5. Loading/unloading and transporting optical cables
6. Distributing and laying optical cables
7. Jointing and leading-in of optical cables and construction test
8. Transmission feature test of the optical repeating section
9. Preparing completion documents
10. Project acceptance

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

7.7.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :

http://www.vue.com/vtclocator/

7.7.2.7 References

Huawei Certified OSP Design Courses Optical Cable Implementation Engineering


Huawei Certified OSP Implementation Courses Guide to Outdoor Optical Cable
Implementation Engineering
Optical Fiber Communications
Optical Cable Product Manuals

7.7.2.8 Recommended Training Program

HC-OI (Huawei Certified OSP Implementation) Training.

118
Huawei Certification Exam Outline (Partner)

7.8 Huawei Certified-Site Civil Work Implementation


Exam Outline

7.8.1 Site Civil Work Implementation Exam Introduction

Certification Exam Total Pass


Exam Code Exam Name Item number
Program Duration Score Score
60 multiple-choice
Huawei Certified- Site questions
Site Civil Work
HC-035-835-ENU Civil Work 90 min (single-answer and 1000 600
Implementation
Implementation engineer multiple-answer),
true-false questions

7.8.2 Site Civil Work Implementation Exam Outline

7.8.2.1 Prerequisites

No prerequisites.

7.8.2.2 Exam Content Overview

The site design exam covers basically on Site Civil Work Implementation. It also contains
site survey and design procedure, Huawei site business service solutions, etc.

7.8.2.3 Exam results valid period

This exam result is valid for 3 years.

7.8.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

7.8.2.5 Key Points of Exam

Civil work implementation


1. Telecom Site Construction Introduction
2. Site lightning protection, Shelter, Tower Foundation, Power System implementation

119
Huawei Certification Exam Outline (Partner)

3. Civil Works Quality Mangement and acceptance


4. Site Construction Safety

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

7.8.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :

http://www.vue.com/vtclocator/

7.8.2.7 References

# Ref.

1 Telecom Site Construction Introduction (video)

2 Guide to Building Huawei Wireless Sites Lightning Protection and Grounding System

3 Guide to Building Huawei Wireless Sites Shelter and Air Conditioner Installation

4 Guide to Building Huawei Wireless Sites Tower Foundation and Installation


Guide to Building Huawei Wireless Sites Equipment Civil Engineering and Enclosing Wall
5
Installation
6 Guide to Building Huawei Wireless Sites Power System Installation

7 Site Construction Project Acceptance1

8 Site Construction Safety Guide

9 Civil Works Quality Mangement Manual V1.0

7.8.2.8 Recommended Training Program

Huawei Certified -Site Civil Work Implementation Training.

7.9 Huawei Certified-Site Design Exam Outline

7.9.1 Site Design Certification Exam Introduction

120
Huawei Certification Exam Outline (Partner)

Certification Exam Total Pass


Exam Code Exam Name Item number
Program Duration Score Score
60 multiple-choice
questions
Huawei Certified-Site
Site Design HC-035-830-ENU 90 min (single-answer and 1000 600
Design engineer
multiple-answer),
true-false questions

7.9.2 Site Design Exam Outline

7.9.2.1 Prerequisites

No prerequisites.

7.9.2.2 Exam Content Overview

The site design exam covers basically on 3 modules of knowledge, telecom survey &
design, civil work survey & design, .and electrical design. It also contains site survey and
design procedure, Huawei site business service solutions, etc.

7.9.2.3 Exam results valid period

This exam result is valid for 3 years.

7.9.2.4 Re-certification Methods

Before your certification expires, you should re-certify with the following methods:
Certificate Re-certification Methods
To re-certify, pass ONE of the following before the certification expiration date:
Pass any subject of the same level of certification in the field of the local
technology
Pass any subject of the high-level certification in the field of the local
technology

7.9.2.5 Key Points of Exam

Telecom survey & design


1. General telecom survey & design key elements
2. Survey & design knowledge on radio network products

Civil work survey & design


1. Introduction of towr structure and foundation
2. Introduction of Site civil work design

Site electrical design


1. Electrical deisgn for radio site
2. Lightning protection and earthing design

121
Huawei Certification Exam Outline (Partner)

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

7.9.2.6 Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the
nearest test center to take the exam.
To find the Pearosn VUE authorized test centers. , please log on the homepage of the
Pearson VUE :

http://www.vue.com/vtclocator/

7.9.2.7 References

# Ref.

1 Survey Design Services

2 GULM Wireless Base Station Survey


The Design of the Tower Structure and
3
Foundation
4 Brief Instruction of Site Civil Structure Design

5 Detailed Design Process for Wireless Sites


Typical Wireless Site Model Configuration and
6
Design
7 Power Distributing System Design
Lightning Protection and Earthing Solution for
8
Base Station
9 Site_New_Build_Service_Technical_Proposal

10 Huawei Site Modernization Technical Proposal

7.9.2.8 Recommended Training Program

Huawei Certified -Site Design Training.

122
Huawei Certification Exam Outline (Partner)

8 Service Delivery flow and Skill


8.1 Maintenance flow and Skill(for MS area Manager and
Field Maintenance Leader)
8.1.1 HCNA- Maintenance flow and Skill subcontractor test

8.1.1.1 introduction

Certification Exam Exam Total


Exam Name Item number Pass Score
Program Code Duration Score
40
multiple-choice
Huawei Certified questions
HCNA- HC-03
Network (single-answer
Maintenance 5-120- 90min 1000 600
Associate-Mainten and
flow and Skill ENU
ance flow and Skill multiple-answer),
true-false
questions

8.1.2 HCNA- Maintenance flow and Skill Exam Outline

8.1.1.2 Prerequisites

The examination to the examinee no specific requirements(Here the examination requirements is to


point to, the examinee should have before the exam the capacity requirements or qualification
requirements, such as intermediate before exams, whether to need to have primary certificate, or
requirements in some specific training, etc)

8.1.1.3 Exam Content Overview

Maintenance sub-contractors examination involved: Basic service regulations, Basic process


knowledge, Basic on-site service guide.

8.1.1.4 Key Points of Exam

Service regulations
1. Equipment Room Safety Management Regulations
2. Shift and Shift Relief Regulations
3. Equipment Owner Regulations
4. Regulations for Important Communication Insurance and
5. Regulations for Network Equipment Operation Security
6. Regulations for Document Material Management
7. Regulations for Spare Part, Instrument, Meter, and Tool Management
8. Test Regulations
9. Data Backup Regulations
10. Confidentiality Regulations
11. Troubleshooting and Report Regulations

123
Huawei Certification Exam Outline (Partner)

Process knowledge
1. corrective service knowledge point
2. Preventive service knowledge point
3. Help desk knowledge point
4. Spare part knowledge point

On-site service guide

1. Preventive Maintenance guide


2. Site Refueling Management guide

Attention please

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

8.1.1.5 Participating in the Exam

8.1.1.6 References

Huawei_Managed_Service_Network_Operation_and_Maintenance_Guide_(Common_Volume)_V1.0

8.2 Training flow and Skill


8.2.1 HCNA- Maintenance flow and Skill subcontractor test
introduction
Certificati
Exam Exam Total Pass
on Exam Name Item number
Code Duration Score Score
Program
40 multiple-choice
HCNA- Huawei Certified
questions
Maintenan HC-035-1 Network
90min (single-answer and 1000 600
ce flow 20-ENU Associate-Maintenan
multiple-answer),
and Skill ce flow and Skill
true-false questions

8.2.2 HCNA- Maintenance flow and Skill Exam Outline

8.2.2.1 Prerequisites

The examination to the examinee no specific requirements(Here the examination requirements is to


point to, the examinee should have before the exam the capacity requirements or qualification
requirements, such as intermediate before exams, whether to need to have primary certificate, or
requirements in some specific training, etc)

124
Huawei Certification Exam Outline (Partner)

8.2.2.2 Exam Content Overview

Maintenance sub-contractors examination involved: Basic service regulations, Basic process


knowledge, Basic on-site service guide.

8.2.2.3 Key Points of Exam

Service regulations
1. Equipment Room Safety Management Regulations
2. Shift and Shift Relief Regulations
3. Equipment Owner Regulations
4. Regulations for Important Communication Insurance and
5. Regulations for Network Equipment Operation Security
6. Regulations for Document Material Management
7. Regulations for Spare Part, Instrument, Meter, and Tool Management
8. Test Regulations
9. Data Backup Regulations
10. Confidentiality Regulations
11. Troubleshooting and Report Regulations

Process knowledge
1. corrective service knowledge point
2. Preventive service knowledge point
3. Help desk knowledge point
4. Spare part knowledge point

On-site service guide

1. Preventive Maintenance guide


2. Site Refueling Management guide

Attention please

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned
here may also be included in the actual exam.

8.2.2.4 Participating in the Exam

8.2.2.5 References

Huawei_Managed_Service_Network_Operation_and_Maintenance_Guide_(Common_Volume)_V1.0

125

You might also like