Professional Documents
Culture Documents
The compact Aruba 207 Series AP delivers a maximum --Minimizes interference from 3G/4G cellular networks,
concurrent data rate of 867 Mbps in the 5GHz band and distributed antenna systems and commercial small
400 Mbps in the 2.4GHz band (for an aggregate peak cell/femtocell equipment.
data rate of 1.3Gbps). Featuring 2x2:2SS, and increased Quality of Service for Unified Communication apps
operating temperature, the 207 AP is designed for medium --Supports priority handling and policy enforcement for
device density environments, such as schools, retail unified communication apps, including Microsoft Skype
branches, warehouses, hotels and enterprise offices, where for Business, with encrypted videoconferencing, voice,
Short guard interval for 20MHz, 40MHz and POWER SOURCES AND CONSUMPTION
80MHz channels The AP supports direct DC power and Power over
Space-time block coding (STBC) for increased range and Ethernet (PoE)
improved reception When both power sources are available, DC power takes
Low-density parity check (LDPC) for high-efficiency error priority over PoE
correction and increased throughput Power sources are sold separately
Transmit beam-forming (TxBF) for increased signal Direct DC source: 12Vdc nominal, +/- 5%
reliability and range --Interface accepts 2.1/5.5-mm center-positive circular
Supported data rates (Mbps): plug with 9.5-mm length
--802.11b: 1, 2, 5.5, 11 Power over Ethernet (PoE): 48 Vdc (nominal)
--802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.3af/802.3at compliant source
--802.11n: 6.5 to 300 (MCS0 to MCS15) --Unrestricted functionality with 802.3af PoE
--802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2 for Maximum (worst-case) power consumption: 12.3W (PoE)
VHT20/40/80 or 10.1W (DC)
802.11n high-throughput (HT) support: HT 20/40 Maximum (worst-case) power consumption in idle mode:
802.11ac very high throughput (VHT) support: 5.3W (PoE) or 4.4W (DC)
VHT 20/40/80
802.11n/ac packet aggregation: A-MPDU, A-MSDU MOUNTING
The AP ships with two (white) mounting clips to attach to a
WI-FI ANTENNAS 9/16-inch or 15/16-inch flat T-bar drop-tile ceiling.
AP-207/IAP-207: Two integrated dual-band downtilt Several optional mount kits are available to attach the
omni-directional antennas for 2x2 MIMO with peak AP to a variety of surfaces; see the Ordering Information
antenna gain of 3.4dBi in 2.4GHz and 6.6dBi in 5GHz. section below for details
Built-in antennas are optimized for horizontal ceiling
MECHANICAL
mounted orientation of the AP. The downtilt angle for
maximum gain is roughly 30 degrees. Dimensions/weight (unit, excluding mount accessories):
--Combining the patterns of each of the antennas of the --150mm x 150mm x 40mm
REGULATORY
FCC/ISED
CE Marked
RED Directive 2014/53/EU
EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
UL/IEC/EN 60950
EN 60601-1-1 and EN 60601-1-2
For more country-specific regulatory information and
approvals, please see your Aruba representative.
RELIABILITY
MTBF: 753,457hrs (86yrs) at +25C operating temperature
CERTIFICATIONS
CB Scheme Safety, cTUVus
UL2043 plenum rating
Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac
WARRANTY
Aruba limited lifetime warranty
RF PERFORMANCE TABLE
Maximum capability of the hardware provided (excluding antenna gain). Maximum transmit power is limited by local regulatory settings.
DATA SHEET
ARUBA 207 SERIES ACCESS POINTS
-5
-5
315
45
315
45
-10
-10
-15
-15
300
60
300
60
-20
-20
-25
-25
285
75
285
75
-30
-30
-35
-35
2.45GHz Wi-Fi (antennas W0, W1) 5.5GHz Wi-Fi (antennas W0, W1)
0
0
345
5
15
345
5
15
330
0
30
330
0
30
-5
-5
315
45
315
45
-10
-10
-15
-15
300
60
300
60
-20
-20
-25
-25
285
75
285
75
-30
-30
-35
-35
270
-40
90
270
-40
90
2.45GHz Wi-Fi (antennas W0, W1) 5.5GHz Wi-Fi (antennas W0, W1)
DATA SHEET
ARUBA 207 SERIES ACCESS POINTS
ORDERING INFORMATION
www.arubanetworks.com DS_AP207Series_071817