Professional Documents
Culture Documents
Editable setting
Restore Defaults
By using the (+ / ) or (- / ) key, can be set as No
No Operation Operation / All Settings / Setting Group 1 / Setting Group 2.
Editable setting
Active Settings
By using the (+ / ) or (- / ) key, can be set as Group 1
Group 1 / Group 2.
Editable setting
Copy From
By using the (+ / ) or (- / ) key, can be set as Group 1 /
Group 1 Group 2.
Editable setting
Copy To
By using the (+ / ) or (- / ) key, can be set as No Operation
No Operation / Group 1 / Group 2.
Editable setting
Setting Group 1
By using the (+ / ) or (- / ) key, can be Enabled or
Enabled Disabled.
Editable setting
Setting Group 2
By using the (+ / ) or (- / ) key, can be Enabled or
Disabled Disabled.
Editable setting
System Config
By using the (+ / ) or (- / ) key, can be
Disabled Enabled or Disabled.
Editable setting
Overcurrent
By using the (+ / ) or (- / ) key, can be Enabled or
Enabled Disabled.
Editable setting
Neg Sequence O/C
By using the (+ / ) or (- / ) key, can be
Disabled Enabled or Disabled.
Editable setting
Broken Conductor
By using the (+ / ) or (- / ) key, can be Enabled
Disabled or Disabled.
Editable setting
Earth Fault 1
By using the (+ / ) or (- / ) key, can be Enabled or
Enabled Disabled.
Editable setting
Earth Fault 2
By using the (+ / ) or (- / ) key, can be Enabled or
Enabled Disabled.
Editable setting
Thermal Overload
By using the (+ / ) or (- / ) key, can be Enabled
Disabled or Disabled.
Editable setting
Cold Load Pickup
By using the (+ / ) or (- / ) key, can be Enabled or
Disabled Disabled.
Editable setting
Measuret setup
By using the (+ / ) or (- / ) key, can be set as
ABC ABC / RYB.
Editable setting
UnderCurr Prot
By using the (+ / ) or (- / ) key, can be
Disabled Enabled or Disabled.
Editable setting
CB Fail
By using the (+ / ) or (- / ) key, can be Enabled or Disabled.
Disabled
Editable setting
Setting Values
By using the (+ / ) or (- / ) key, can be set as Primary
Secondary / Secondary.
Editable setting
Phase CT Primary
By using the (+ / ) or (- / ) key, can be set The
100 A setting range is from 1A to 30000A step 1A.
Editable setting
Phase CT Secy
By using the (+ / ) or (- / ) key, can be set as
1A 1A / 5A.
Editable setting
E/F CT Primary
By using the (+ / ) or (- / ) key, can be set The
100 A setting range is from 1A to 30000A step 1A.
Editable setting
E/F CT Secondary
By using the (+ / ) or (- / ) key, can be set as 1A /
1A 5A.