Professional Documents
Culture Documents
TM
.
Ready Made
Handrailing
.
Galvanised Finish
.
Wall Fixing Brackets
.
Lengths Of Tube
550
550
1100
1100
500
550
550
1100 1100
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com Web: www.lockinex-store.com
Lockinex
TM
B
All measurements in (mm)
Handrail termination flange.
A B C D E
A10 - 7 75 51 98 6 6
A10 - 8 85 54 112 10 6
165 -105
Two tubes can be joined with an angle range of between 105 degrees - 165 degrees.
Can be used for obtuse angle change in a handrail.
T 42.4/48.3mm
Handrail tube
( 3.2 mtr or 6.0 mtr) Galvanised finish
42.4 or 48.3
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com Web: www.lockinex-store.com
Lockinex
TM
T 42.4/48.3mm
Handrail tube pair ( 1.5mtr x 2) Galvanised finish
42.4 or 48.3
Flat washer
Rubber sleeve
Rubber sleeve designed for tarmac
expands when fixing.
bolt is tightened. M12 bolt
slots into rubber
sleeve.
All measurements in (mm)
M12 x 100mm bolt and washer complete with rubber sleeve. A hole must be drilled in the tarmac to accept
rubber sleeve. Hole must be 24mm dia and a depth of 80mm. This fixing can be used with Lockinex speed
humps, key clamp base plates, plastic bendy bollards and column guards.
12
M12 Thread
Washer
All measurements in (mm)
Lockinex F-M12 x 95 holding down bolt. This fixing can be used with key clamp base plates, bollards and column
guards (not to be used with speed humps). For use in concrete.
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com Web: www.lockinex-store.com