You are on page 1of 3

Subjject 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Average

General Aptitude (GA) 15 15 15 15 15 15 15 15 15 15 15 15


Geo-Technical Engineering 24 21 23 25 16 17 15 15 15 10 15 14.5
Engineering Mathematics 16 18 19 20 15 15 13 13 10 11 13 12.5

Environmental Engineering 20 15 15 14 14 9 11 10 10 9 8 9.5

Transportation Engineering 14 15 17 20 6 8 9 9 7 8 8 8.2

Hydrology & Irrigation 14 8 10 9 7 5 13 8 10 8 5 8.2

Concrete Structures 14 11 12 12 6 5 9 9 7 10 6 7.7

Fluid Mechanics &


17 17 16 16 7 7 1 7 5 6 11 6.2
Hydraulics

Structural Mechanics 10 6 9 6 2 3 8 7 8 8 3 6.2

Steel Structures 9 6 6 5 6 4 2 3 7 6 4 4.3

Mechanics 10 18 12 3 6 6 1 2 4 6 6 4.2

Surveying 0 10 10 9 5 3 3 2 2 3 6 3.6
Total 100
Geo-Technical Engineering

Environmental Engineering

Transportation Engineering

Fluid Mechanics & Hydraulics

Concrete Structures

Hydrology & Irrigation

Mechanics

Structural Mechanics

Steel Structures

Surveying
Weightage
Soil Mechanics (Consolidation, Permeability, Slope Stability,
Geo-Technical Engineering
Index properties) Foundation Design,Concrete Technology
Quality standards,Domestic wastewater treatment, air pollution
Environmental Engineering
meteorology
Highway Engineering, Transportation Infrastructure,Geometric
Transportation Engineering
design of railway track
Fluid statics, Kinematics, Dynamics, Laminar-Turbulent Flow,
Fluid Mechanics & Hydraulics
Pipe Flow, Open Channel Flow Hydraulics
Working stress, Limit state and Ultimate load design concepts;
Concrete Structures Design of beams, Bond and development length; Pre-stressed
concrete

Hydrologic cycle, ground water hydrology -steady state well


Hydrology & Irrigation
hydraulics,Canal regulatory works, cross-drainage structures,

 System of forces, free-body diagrams,Euler’s equations of 
Mechanics
motion;
Statically determinate and indeterminate structures by force/
Structural Mechanics
energy methods; Method of superposition; Analysis of trusses
Working stress and Limit state design concepts; Design of
Steel Structures tension and  compression members, Connections – simple and 
eccentric, Plastic analysis of beams and frames.
Basics of Geographical information system (GIS) and
Surveying
Geographical Positioning system (GPS).

You might also like