Professional Documents
Culture Documents
<Figure 1>
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc. 5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com
Company: Date: 13/12/2017
Anchor Designer™ Engineer: Page: 2/5
Software Project:
Version 2.5.6464.6 Address:
Phone:
E-mail:
<Figure 2>
Recommended Anchor
Anchor Name: AT-HP - AT-HP M16 - 5.8
Code Report: ETA-14/0383
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc. 5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com
Company: Date: 13/12/2017
Anchor Designer™ Engineer: Page: 3/5
Software Project:
Version 2.5.6464.6 Address:
Phone:
E-mail:
NRd,p = NRk,p /gMp = N0Rk,p(Ap,N / A0p,N)Ys,NpYg,NpYec,NpYre,Np /gMp [Eq. 3.2 & 5.2]
Ap,N [mm2] A0p,N [mm2] Ys,Np Yg,Np Yec,Np Yre,Np N0Rk,p [kN] gMp NRd,p [kN]
285529 109227 1.000 1.084 0.673 1.000 50.26 1.80 53.22
NRd,c = NRk,c /gMc = N0Rk,c(Ac,N / A0c,N)Ys,NYre,NYec,N /gMc [Eq. 3.2 & 5.3]
Ac,N [mm2] A0c,N [mm2] Ys,N Yre,N Yec,N N0Rk,c [kN] gMc NRd,c [kN]
335175 140625 1.000 1.000 0.701 70.58 1.80 65.53
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc. 5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com
Company: Date: 13/12/2017
Anchor Designer™ Engineer: Page: 4/5
Software Project:
Version 2.5.6464.6 Address:
Phone:
E-mail:
k Ap,N [mm2] A0p,N [mm2] Ys,Np Yg,Np Yec,Np Yre,Np N0Rk,p [kN]
2.0 285529 109227 1.000 1.084 0.903 1.000 50.26
Ac,N [mm2] A0c,N [mm2] Ys,N Yre,N Yec,N N0Rk,c [kN] gMc VRd,cp [kN]
335175 140625 1.000 1.000 0.913 70.58 1.50 171.38
VRd,c = VRk,c /gMc = V0Rk,c(Ac,V/ A0c,V)Ys,VYh,VYa,VYec,VYre,V /gMc [Eq. 3.2 & 5.8]
Ac,V [mm2] A0c,V [mm2] Ys,V Yh,V aV Ya,V Yec,V Yre,V V0Rk,c [kN]
336000 320000 0.925 1.000 6.7° 1.006 0.976 1.000 83.18
Shear Action Load, VSd [kN] Resistance, VRd [kN] Ratio Status
Steel 1.93 31.44 0.06 Pass
Pry-out 7.09 171.38 0.04 Pass
Concrete Edge 6.85 52.89 0.13 Pass (Governs)
AT-HP M16 - 5.8 meets the selected design criteria. Fixture hole size is 18 mm.
7. Installation
Installation instruction:
http://www2.strongtie.com/software/wwas/codes/?product=ATHP&design=etag&language=english
8. Warnings
- Designer must exercise own judgement to determine that the requirements in TR 029 Section 6 "Serviceability limit state" and Section 7
"Additional proofs for ensuring the characteristic resistance of concrete member" are fulfilled where required.
- Per TR 029 Section 5.2.2.5, splitting failure is avoided during anchor installation by complying with minimum values for edge distance Cmin,
spacing Smin, member thickness hmin and reinforcement as given in the relevant ETA.
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc. 5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com
Company: Date: 13/12/2017
Anchor Designer™ Engineer: Page: 5/5
Software Project:
Version 2.5.6464.6 Address:
Phone:
E-mail:
- Refer to manufacturer’s product literature for hole cleaning and installation instructions.
9. Contact Information
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc. 5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com