Professional Documents
Culture Documents
www.metrel.si
HV Insulation Diagnostics
www.metrel.si
METREL is one of the world leading Quality and traceability Electrical Instalations Safety 1
manufacturers and suppliers of high quality Eurotest 61557 1
• Supported trough certification in
electrical measurement and test instruments. Eurotest EASI 2
accordance with standard
Wealth and quality of living in all respects Eurotest EX 2
ISO 9001:2000.
require constant care, understanding and Instaltest 61557 2
innovative solutions for the following Installcheck 3
Earth-Insulation Tester 3
segments:
Smartec family 4
• electrical installations, machines and RCD / Loop / Line 4
appliances safety control, RCD (Fi) 4
• electrical power quality and Z / Loop / Line 4
• diagnostics of IT and telecommunication Insulation / Continuity 5
networks. Earth/ Clamp 5
Comparison table 6
METREL is in its segment on the very top of Line Tracer 7
technological development and invest over Demonstration board 7
10% of the total income in research and Power Quality Analysis 7
development projects annually. In METREL
Power Quality Analyser-Plus 8
we convey a broad spectrum of our
Power Quality Analyser 9
knowledge and expertise to an open market Metrel training center Power Harmonics Analyser 9
and to the end users of our instruments who Power Q Plus 10
• Cost-free, quick trainings for customers
benefit at: Power Simulator Set 10
who purchase new Metrel instruments.
- application consulting for various technical VoltScanner 11
• Trainings and seminars on the following Comparison table 11
and measurement projects, segments:
- technical support for a use of METREL - technical standards, HV Insulation Diagnostics 12
instruments, - measuring and test methods, TeraOhm 5 kV 12
- calibration and repair of instruments and - use and application of Metrel instruments. ISO test 12
- education and training in METREL Training Machines / Appliances /
center. Switchboards Safety 13
METREL test and measuring instruments are CE Multitester 13
developed and manufactured in accordance Multiservicer 13
with well known Low Voltage and EMC OmegaPAT, BetaPAT 14
Directives. Applied standards are IEC / EN AlphaPAT 14
61010 -1 for safety and EC / EN 61326 for AutoPAT 14
EMC. Comparison table 15
LAN Cabling Testing 16
Multi LAN 350 16
Warranty and Repair Service Multi LAN 200 17
• Waranty period is 24 months. Cable Scanner 17
• Economical repair service out of Indoor Environment Quality 18
warranty.
MultiNorm 18
FonS 18
Calibration Technical support Poly 18
• Calibration certificate is supplied with • Hints and tips on using Metrel Comparison table 19
every instrument and is included in price. instruments in various applications Optional Accessories 20
• Conformity declaration is included with and conditions.
each tester.
Metrel´s installation safety testers have been for a long time considered as a
benchmark on the market and we are proud to continue with a development and
supply of technically advanced and highly reliable instruments.
The range of Metrel´s electrical installation safety testers covers the needs of any installer,
constructor or inspector. Each instrument represents a strong tool for troubleshooting, testing
and diagnostic of safety on different types of installations in buildings. Instruments are
designed for testing all the main parameters on safety of electrical installations in buildings.
Instruments have been designed in accordance with international norms like IEC/EN
th
61557, IEC 60364, VDE 0100, BS 7671, 15 Edition, HD 384, CEI 64.8.
With their quality features, performances and advantages on one side and competitive
prices on the other, the Metrel installation testers are known as best buy on the market.
Additionally to highly successful Eurotest 61557 and Instaltest 61557 range a new line of
multifunctional testers has been launched.
Eurotest EASI MI3100 and the Eurotest XE MI3102 are the first of a series of five
EUROTEST new generation of digital testers designed for the installer/contractor market.
Attractive and lightweight design accompanied with advanced technical performance will
set a new standard on the installation testers market.
w! w!
A 1143 EURO-Z impedance adapter Ne A 1141 PALM Eurolink Ne A 1155 Pocket PC Eurolink
• High resolution • Eurolink Software compatible now with Pocket PC and
and accuracy PALM PDA.
impedance
measurement. • Preparing of the
• Test current up to report on the object
294 A, for testing side.
impedance from • With built-in Fuse
1 mOhm and Isc Base table and
up to 400 kA. characteristics.
1
Electrical Installations Safety
!
Eurotest EASI New Part No. MI 3100
!
Eurotest XE New Part No. MI 3102
resistances with Fuse evaluation table built-in, • TN/TT/IT Multi System support.
RCD test with Trip lock function, phase • Multi-functional tip commander for faster
sequence in 3-phase systems, on-line voltage execution of a measuring sequence.
monitor, 3-wire Earth resistance test with built-in • Rechargeable battery pack with a charger is
battery operated generator, Leakage Current included in a standard set.
test and test of Luminance with optional LUX • Dimensions (w x h x l): 230 x 103 x 115 mm.
meter probe.
• Mass (without accessories): 1.3 kg.
Additional features:
• Built-in internal memory for storing up to 500 Standard Set:
measurements. - Instrument Eurotest XE
- Tip commander with two function key
• Eurolink is MS® Windows compatible - Schuko-plug test cable
downloading software package. - Test cable Universal connection 3 x 1.5 m
• Eurotest XE is a typical representative from a
• Field proven Earth resistance measuring method - Earth test set (test lead 4 m + 2 x 20 m, 2 x test rods)
new line of Metrel´s installation safety - Handbook “Measurements on electric installations”on CD
which eliminates stray earth currents during the
testers. Key advantages like a lightweight measurement. - Power supply adapter + 6 NiMh AA accus
design and small dimensions are completed - PC SW Eurolink XE on CD
• Fast and reliable Loop resistance measurement - Test tip: blue, black, green
with extensive measurement features. This
without RCD tripping. - Alligator clip, 3 pcs
combination makes Eurotest XE a real - Soft carrying neck belt
• Built-in Fuse characteristics database for quick
working horse suitable for situations where - Soft carrying bag
evaluation of measuring results at ZLINE
performance and reliability are of a major - RS 232 / PS cable
measurement. - USB cable
importance.
• On-line voltage monitor shows voltage levels for - Instruction manual - short
• Measuring functions: DC insulation resistance, - Instruction manual on CD
L-L, L-N and L-PE during the measurement.
PE conductor continuity test, Line and Loop - Declaration of conformity
- Product verification data
2
Electrical Installations Safety
• All necessary measurements for electrical • Dimensions (w x h x l): 100 x 50 x 200 mm.
installation safety are included: DC • Mass (without accessories): 0.6 kg.
insulation resistance, Continuity test, Line
and Loop resistance, RCD test, wiring
check and phase sequence.
Standard Set:
• Pass/Fail visual and audio presentation of - Instrument Installcheck
results. - Carrying belt
- Shuko-plug test cable, 1m
- Safety test leads with fixed test tips, 1.5 m, 2 pcs.
- Instruction Manual
- Quick Application Guide
- Declaration of conformity
- Test Certificate
Circuit Autotest
Patent pending! Patent No. 200000308
3
Electrical Installations Safety
4
Electrical Installations Safety
Smartec blue line family of combined and single function installation testers:
•Five instruments for low voltage installation testing in accordance with IEC / EN 61557.
•Simplicity of use, low weight and robust design are key attributes of these instruments.
•Internal memory for saving up to 1000 measuring results with a downloading option.
•Optional PC Software package SmartLink, compatible with Windows operation systems for measuring results evaluation on a
personal computer.
•Simultaneous use of several different Smartec instruments on one location can essentially reduce needed time for execution of all
necessary measurements.
•Complete selection of optional accessories.
5
Earth-Insulation RCD
Instrument Type Eurotest EurotestEASI EurotestXE Instaltest Installcheck Tester Loop/Line RCD (FI) Z Loop/Line Insulation/Continuity Earth/Clamp
w! w!
Ne Ne
MI 2088
MI 2086 EU MI 2088-20
Measurement functions and other Part No.: MI 2086 ST MI 3100 MI 3102 MI 2087 MI 2150 MI 2088-50 MI 2120 MI 2121 MI 2122 MI 2123 MI 2123C MI 2124
Insulation Resistance
INSULATION from 100V from 100V 500V
Test voltage 50 V/100 V/250 V/1000 V DC
Continuity of PE Conductors
Automatic polarity exchange, Test current >200 mA
CONTINUITY Low Resistance Continuous measurement
No polarity exchange, Low test current
Line Impedance ZLINE / IPCS; L-L, L-N
Loop Impedance ZLOOP / IPCS; L-PE
Contact voltage at IPCS; Auxililary test rod method
LINE, LOOP
Line Resistance RLINE / IPSC; L-N
Loop Resistance RLOOP / IPSC; L-PE
Loop Resistance L-PE; Without tripping RCD, Test current 15 mA
Contact voltage; (Without tripping the RCD)
Earth-Loop resistance; (Without tripping the RCD)
Earth Resistance
RCD (FI) Test current ID N/2 (Without tripping the RCD), Auxililary test rod method
D
RCD Trip Out Time; Test current 0.5ID N, D I N, 5I N ID N
6
RCD Automatic Test
Total Earth Resistance; Test method with four /three / two test rods / / -/ /- / / / /
Particular Earth Resistance; Test method with two test rods and one clamp
EARTH Earth Resistance; Test method with two clamps
Specific Earth resistance; Test method with four test leads / four test rods
Electrical Installations Safety
Accurate
fuse locating
Standard Set:
- Demonstration Board MA 2067
- Jumper, 4 pcs
- Demonstration board support (for vertical use)
- Single phase matching cable (code no. 20 691 648)
- Instruction Manual
• Complete representation of a real low • Excellent tool for training and education
voltage installation in industrial and centres, schools and laboratories.
residential areas. The board includes all • Detailed instruction manual with profound
typical elements found in real systems: explanation of all typical measurements.
sockets, electrical loads, lightning and • Dimensions (w x h x l):
earthing systems for TT, TN and IT types - table: 680 x 175 x 450 mm,
of installations. - table support: 700 x 400 x 320 mm.
• 65 different measurements according to • Mass: - table: 12.5 kg,
IEC / EN61557 are supported. - table support: 3.5 kg.
• Fault situation simulation switches.
7
Power Quality Analysis
Different pre-set loggers within MI 2392 PowerQ Plus allow quick, on-site
power quality assessment without a need to download recorded data on a
PC. Examples show phase diagram which helps when connecting the
instrument on power supply network and U,I,f logger which is a useful Periodic measurement of basic power quality parameters (U,I, P, Q, S, PF, etc.)
feature for phase conditions evaluation. with harmonics analysis performed with MI 2092 Power Harmonics Analyzer.
8
Power Quality Analysis
Standard Set:
- Instrument Power Quality Analyser-Plus
- Current clamp 1000 A/1 V, 3 pcs
- Smal soft carrying bag for current clamps
- Test tip, red; 3 pcs
• Metrel´s top of the range three phase, - Safety flat clamp, 4 pcs
multifunction power quality analyser - Alligator clip, black; 4 pcs
with complete selection of test functions - Voltage measurements cables; 6 pcs
and diagnostics tools for wide range of - Mains cable
- RS 232 cable
applications. - 4 × 1.2 V NiCd batteries
• Automatic EN 50160 power quality - Power Link PC analysis and control SW package
assessment test. - Soft carrying bag
- Instruction manual
• Flicker measurement in accordance with - Declaration of conformity
IEC 61000-4-15. - Product verification data
- CD Modern Power Quality measurement techniques
• Modem communication support for
remote control of the instrument.
9
Power Quality Analysis
• Optional remote modem communication • Dimensions (w x h x l): 265 x 110 x 185 mm.
support. • Mass (without accessories): 2 kg.
• Optional: 110 V version.
Standard Set:
- Instrument Power Harmonics Analyser
- Current clamp 1000 A/1 V, 3 pcs
- Smal soft carrying bag for current clamps
- Test tip, red; 3 pcs
- Alligator clip, black; 4 pcs
- Voltage measurements cables; 6 pcs
- Mains cable
- RS 232 cable
- 4 × 1.2 V NiCd batteries
- Power Link PC analysis and control SW package
• Three phase, multifunction power quality - Soft carrying bag
analyzer suitable for performing all the - Instruction manual
most frequent measurements and - CD Modern Power Quality measurement techniques
diagnostics in different electrical systems. - Declaration of conformity
- Product verification data
!
New
Plus
Power QPlus Part No. MI 2392
• Simulation of transients, inrush currents, flic- • Dimensions (w x h x l): 265 x 110 x 185 mm.
kers, harmonics, power supply outages, etc. • Mass (without accessories): 2.4 kg.
• Load character adjustment, adjustable
current and voltage level with a simulation
of 22 different faulty conditions.
• Optional: 110 V version.
Standard Set:
- Instrument Power Simulator
- Short form quick guide plastic cards
- Power cord
• One phase, multi-purpose power - Current measuring cable
simulator for simulating typical situations - Instruction manual
in low voltage power supply systems. - CD Modern Power Quality measurement techniques
• Excellent tool for training and demon- - Declaration of conformity
- Product verification data
stration purposes.
10
Power Quality Analysis
• Recording of power supply outages and • Dimensions (w xh xl): 100 x 50 x 200 mm.
transient over voltages. • Mass (without accessories): 0.6 kg.
• Quick voltage quality assessment for
unskilled users. Standard Set:
- Instrument VoltScanner
• Windows compatible evaluation software - Mains measuring cable, 1.5 m
package ScanLink. - Battery-rechargeable NiCd 1.2 V, 4 pcs
• Optional: 110 V version. - Windows Software "ScanLink”
- RS 232 cable
- Instruction Manual
- Declaration of conformity
- Product verification data
Plus
Power Quality Analyser-Plus Power Quality Analyser Power Harmonics Analyser Power Q VoltScanner
!
N ew
11
High Voltage Insulation Diagnostics
12
Machine, portable appliance and switchgear electrical safety testers
13
Machine, portable appliance and switchgear electrical safety testers
• Test functions comprise dielectric withstanding • Dimensions (w x h x l): 345 x 160 x 335 mm.
test with 1500 V and 3000 V AC, DC • Mass (without accessories): 9 kg.
insulation resistance measurement, PE voltage
drop / earth bond continuity test, leakage
current measurement and functional test. Standard Set:
• 120 Pre-programmed Autotest sequences are - Instrument OmegaPAT- MI 2140 or BetaPAT MI 2141
stored in the instrument's memory and they - Earth Bond Clip
cover most of the test procedures required by - Flash Test Probe (only for MI 2140)
PAT standards. Autotest sequences give - PC SW Pat Link with RS 232 cable
information on allowed standard-set limits for - Instruction manual
all test parameters and essentially accelerate - Declaration of conformity
measuring procedure. - Production verification data
• Possibility to create and store Custom
Autotests sequences.
• Multifunction, alphanumeric keyboard allows
specific data entries (appliance description,
• Top of the range measuring instruments for location, etc.).
testing of electrical safety of portable • Appliance identification and access to the test
appliances, IT equipment and IEC cords in sequence via Barcode reader or RFID tags.
accordance with corresponding IEC/EN
and VDE standards. • Version BetaPAT MI 2141 is suitable for
applications where AC dielectric test is not
• OmegaPAT and BetaPAT are suitable for
required (e.g. periodic testing).
periodic testing, troubleshooting or as a tool
for electrical safety testing in workshops. • Optional: 110 V version.
.
14
CE Multitester MultiServicer MultiServicer OmegaPAT, BetaPAT AlphaPAT AutoPAT
/ / -/
(only
/ / MI 2140)
/ / - / - / - / - / / / - / / -
/ / / -/ / /- -/ / /-
15
/ / - / / -/ / - / /- -/ / - / /- / / / / / / / / /- /-/-/
(with current
clamp)
Machine, portable appliance and switchgear electrical safety testers
/- /- /- /- /-
/- /-
LAN Cabling Certification
• Set MI 2016 PS comprises of two Multi • Dimensions (w x h x l): 265 x 110 x 185 mm.
LAN 350 instruments that enable fast • Mass (without accessories): 2.1 kg.
execution of measurements and double
memory space for storing test results.
16
LAN Cabling Certification
• Connectivity supports UTP, STP, ScTP, FTP • Dimensions (w x h x l): 265 x 110 x 185 mm.
and coax cables. • Mass (without accessories): 2.1 kg.
• Tabelaric or graphic presentation of test
results.
• Windows compatible LAN Link software Professional LAN tester
package enables test results downloading with inbuilt TDR
and creation of a test report.
• Quick and easy determination of various • Connectivity supports UTP, STP, ScTP, FTP
wiring failures: crossed pairs, crosstalk, and coax cables.
short-circuit, mismatched pairs, bad • Dimensions (w xh xl): 156 x 100 x 190 mm.
contacts, no shield, etc. • Mass (without accessories): 1 kg.
• Part of a standard set are locators for fast
and simple numeration of LAN sockets.
• Optional remote unit S 2004 for
communication over the tested cable and Standard Set:
shorten test time. - Instrument Cable Scanner
- Cat 5 Patch Cable
- Standard Remote #1
- Locators (#1 - #4), 4 pcs
- Instruction manual
- Declaration of conformity
- Product verification data
• Cable Scanner is easy to use LAN tester
with wide variety of functions for fault
finding and troubleshooting on IT
cabling connections.
• TDR facility with adjustable NVP allows
determination of distance to the fault or
cable length measurement. Acoustic
generator combined with a receiver
enables pair determination in multi-pair
cables.
17
Indoor Environment Quality
Universal handheld instruments for the measurement, logging and analysing parameters
specific for indoor environments are designed to provide flexibility, versatility and
convenience to most demanding of professional users.
• (Depending on connected probes) they provide the measurement and analyses of temperature
(air, black globe and contact), air velocity, relative humidity, illuminance, luminance or act as a
sound level meter.
• They provide a dew point, a mass flow, a PMV (predicted mean vote), a PPD (predicted
percentage of dissatisfied), a WBGT (wet bulb globe temperature), the luminance contrast
calculations as well as, the real-time octave and one third octave sound frequency analyses.
• Provision of air temperature, air velocity, relative humidity measurement with only one
microclimatic probe at the time.
• Special design facilitates easy handling.
• Optional probe connection with extension cable (illuminance/luminance/sound) or telescopic
rod (air velocity, relative humidity and air temperature) available.
• Advanced features: an oversized graphic display 160x160 dots with backlight, a tripod holder
for an easy operation, the rechargeable batteries for up to 8 hours of continuous operation, an Complete system of ISO calibration
internal memory to store over 4000 readings, a self-management internal logger, a time and certification guarantees an overall quality
date display and the help menus. and accuracy especially since the probes
• Powerful logging software provided is used for data downloads to a computer and simplifies the and the instrument are calibrated together
creation of test reports. as an integral device.
• Complies with all major international standards such as EN ISO 7726, ISO 7730, ISO 7243
for IAQ, DIN 5032 (Part 1 Part 7) for luminance and illuminance, EN 12599 for HVAC, IEC
61672 and IEC 61260 Class 1 and Class 2 for sound.
• Target customers: IAQ inspectors, HVAC engineers, safety officers, building managers, industrial
hygienists and lab managers.
!
Multinorm New Part No. MI 6201
Two modes: in an on-line reading mode • Dimensions (w x h x l): 220 x 115 x 90 mm.
which displays current measurements and • Mass (without accessories): 0.70 kg.
in a logger mode, which automatically
stores all measurement values per logging Standard Set Part No. MI 6201 ST
interval. - Instrument Multinorm
• Additional measurement features are: a - Probe adapter A 1144
- Universal microclimatic probe A 1091
luminance measurement, a contrast, a
- Illumination probe type B A 1092
globe temperature, a thermocouple - Class 2 sound probe A 1151
(contact temperature), a PMV (predicted - Plastic shield A 1158
mean vote), a PPD (predicted percentage - Windscreen A 1157
of dissatisfied), a WBGT (wet bulb globe - Carrying case A 1133
temperature). - LabLink PC software with RS 232 cable A 1166
• LabLink PRO PC software with RS232 - Power supply adapter + 6 NiMH batteries A 1083
- Tripod adapter A 1129
cable and upgradeable firmware for
- Instruction manual
• Universal all-in-one instrument for additional probes. LabLink PRO is used for - Declaration of conformity
measurement of air temperature, air logged data analysis, charting and - Product verification data
velocity, relative humidity, illluminance, reporting. Optional frequency analysis PC
software SoundLink PRO is used for sound
luminance and the Class 1 (Pro Set) or
data analyses, charting and reporting.
Class 2 (Euro Set and Standard Set)
sound analyses.
• Measurement functions: air temperature, air
velocity/multipoint/mass flow calculations,
relative humidity/dew point, illuminance
and sound level meter and analyser.
Completely digitalised Class 1 (Pro Set) or
Class 2 (Euro Set and Standard Set) sound
level meter with two independent measuring
channels compliant with IEC 61672
standard. Each channel can be set with Euro Set Part No. MI 6201 EU
different time and frequency weighting. - Standard Set
Multinorm is also real-time octave and one - Complete System ISO Calibration Certificate
third octave frequency analyser compliant
Pro Set Part No. MI 6201 PR
with IEC 61260 standard. Operates in - Euro Set with Class 1 sound probe instead of Class 2
sound probe
18
Indoor Environment Quality
!
FonS New Part No. MI 6301
• The measurement functions (where letter X Euro Set Part No. MI 6301 EU
stands for A, C or Z frequency weighting, Y for - Instrument FonS
fast, slow or impulse time weighting applicable - Class 2 sound probe A 1151
to both first and second measuring channels): - Windscreen A 1157
- LXY, a time weighted sound level; - Plastic shield A 1158
- LXeq, a time average sound level, or - Windscreen A 1157
- Carrying case A 1133
equivalent continuous sound level; - SoundLink LITE PC software with RS232 cable A 1167
- LXYmax, a maximum time weighted sound level; - Power supply adapter + 6 NiMH batteries A 1083
- LXYmin, a minimum time weighted sound level; - Tripod adapter A 1129
- LXpeak, a peak sound level; - Instruction manual
- LXE, a sound exposure level; - Declaration of conformity
- L%, a percentile sound pressure level. - Product verification data
• A windscreen and a sound shield facilitate the - Complete system of ISO calibration certificate
• Completely digitalised Class 1 (Pro Set) or
Class 2 (Euro Set) sound level meter with two outdoor measurements by reducing the wind
independent measuring channels compliant noise and/or give a protection against the dust
with IEC 61672 standard. Each channel can or other small particles often found in the air of
be set to a different time and frequency harsh industrial environments.
weighting. FonS is also a real-time octave • SoundLink LITE PC software is used to
and one third octave frequency analyser download; review and export saved and
compliant with IEC 61260 standard. logged data to other spreadsheet software
• Operates in two modes: an on-line reading applications. Optional frequency analysis PC
mode which displays current measurements and software SoundLink PRO is used for data
logger mode, which automatically stores all analyses, charting and reporting.
Pro Set Part No. MI 6301 PR
measurement values per logging interval. • Dimensions (w x h x l): 220 x 115 x 90 mm.
- Euro Set with Class 1 sound probe instead of
• Mass (without accessories): 0.70 kg. Class 2 sound probe
!
Poly New Part No. MI 6401
19
Merilni instrumenti za preverjanje varnosti električnih inštalacij
Optional Accessories
Eurotest MI 2086, Instaltest MI 2087 Line Tracer MI 2093 Smartec Earth/Clamp MI 2124
A 1006 A 1020
Part No.
A 1164 A 1153 A 1154
Part No.
A 1020 A 1045 A 1111 A 1050
A 1168 - Plug commander (for MI 3100)
A 1095 A 1096 S 2012
A 1170 - Plug commander (for MI 3102)
S 2025 - Connection leads for mini clamp (for MI 3102) Part No.
A 1074 - Mini current clamp (for MI 3102) A 1095 - INS / SUB adapter
A 1018 - Measurement clamp, professional (for MI 3102) A 1096 - Adapter for hard connection
A 1160 - Fast 6 cells AA charger S 2012 - Continuity extension,10 m, set of 2 pcs
A 1007 A 1011 A 1055 A 1026
A 1169 - Fast 12 cells C, AA charger
A 1172 - Lux meter probe, type B
A 1173 - Lux meter probe, type C AlphaPAT MI 2142
A 1164 - Test lead, black 50 m (for MI 3102) A 1018 A 1117 A 1136 A 1106
A 1153 - Test lead, black 20 m (for MI 3100)
A 1013 A 1064 A 1014 A 1015 A 1016
A 1154 - Test lead, black 4 m (for MI 3100)
A 1110 - Three phase cable Part No.
A 1111 - Three phase adapter A 1007 - Carrying strap (for all types)
A 1011 - Universal test cable, 3 x 1.5 m (for MI 2121)
A 1013 - Aligator clip, black (for MI 2121)
Installcheck MI 2150 A 1014 - Test tip, black (for MI 2121)
A 1111 S 1112 A 1020 A 1015 - Test tip, blue (for MI 2121)
A 1016 - Test tip, red (for MI 2123)
A 1020 - Small soft carrying bag (for all types)
A 1026 - Test lead 20 m, red (for MI 2123) A 1103 A 1105 A 1107 A 1108
A 1045 - Battery charger with a set of
4 pcs NiCd batteries (for all types) Part No.
A 1050 - PC SW "Smart Link" with A 1018 - Measurement clamp - (professional, low
A 1114 A 1115 interface cable (for all types) current range type)
Part No. A 1055 - Universal test cable, 2 x 1.5 m (for MI 2123) A 1103 - Printer
A 1064 - Aligator clip, red (for MI 2123) A 1105 - Bar code reader
A 1020 - Small soft carrying bag
A 1111 - Three phase adapter (for MI 2122) A 1106 - Bar code labels
A 1111 - Three phase adapter
A 1107 - RFID reader / writer
A 1114 - Alligator clip, insulated
A 1108 - RFID tags, 50 pcs
A 1115 - Protection case
A 1117 - PC SW PAT link with RS 232 cable
S 1112 - Universal Test Cable 1.5 m with
3 safety test tips A 1136 - 110 V Adapter
20
Optional Accessories
Merilni instrumenti za preverjanje varnosti elektriènih inštalacij
A 1160
FonS MI 6301
A 1099 A 1100 A 1101
A 1159 - Tripod
A 1145 - Extension Cable
A 1160 - Fast cell charger
A 1152 - Sound calibrator Class 1
A 1165 - Sound calibrator Class 2
A 1162 - SoundLink PRO
A 1120 S 2014 S 2015
Part No. #2 - #6 #7 - #15 #5 - #16 #17 - #28
Naročniška
S 2005 številka
S 2006 A 1043 A 1044
Cena (SIT) Poly MI 6401
A 1037 - Current transformer 5 A/1 V
A 1039 - Clamp adapter Part No. A 1130 - Telescopic rod with 2.5 m cable
A 1069 - Mini clamp 100 A/1 V A 1006 - Soft carrying bag A 1127 - Humidity & air temperature probe
A 1099 - Current clamp 3000 A/1 V A 1007 - Carrying strap A 1128 - Thermocouple probe type K wire
A 1100 - Modem ST A 1043 - Locator set II (# 5 - #16) A 1132 - Luminance probe
A 1101 - Modem GSM A 1044 - Locator set III (# 17 - #28) A 1131 - Black globe thermometer
A 1120 - 3-phase flex-kit, 45 cm, 3000 A/1 V A 1082 - Tracer A 1159 - Tripod
A 1122 - Mini clamp 5 A /1 V A 1083 - Battery charger with a set of A 1161 - Tripod holder for black globe
A 1124 - Modem Entrance Key 6 pcs NiCd bateries A 1145 - Extension Cable
(for MI 2092 and MI 2192 only) S 2004 - Talk Remote Unit with headphones set A 1160 - Fast cell charger
S 2014 - Safety fuse adapters S 2005 - Standard remote set (# 2 - # 6), 5 pcs
S 2015 - Safety flat clamps
www.metrel.si
HV Insulation Diagnostics
www.metrel.si