Professional Documents
Culture Documents
Easy to see through 1) Must repel water from A glare free plastic is almost https://www.aptinting.com/the- Over time it will stop Apply a sealer that seals
the surface of the shield impossible and can become very importance-of-windshield-tint/ repelling due to sun the plastic and increases
to minimize sight loss costly. Films can also be applied to damage and if it doesn’t the repelling of water in
2) Must not create glare reduce glare but require a professional repel good enough then the addition to the film.
while in the sun that to install. rider will not be able to see.
obstructs sight The extra sealer will also
3) Easy to clean when it Cost increases by 30% when a film is Any scratches from help resist scratches
gets dirtied by bugs added. This film will also make bugs cleaning with a dirty rag
easier to remove. can cause a glare problem
Strong mounts 1) Must withstand 80MPH Mount must hold up with a constant https://sciencing.com/calculate- Removable mounts create a Add a part that doubles
+ wind gusts force from wind resistance. The wind wind-loads-wind-speeds- weaker structure over the portion that
2) Must be easily creates a torque on the lower mount. 6104140.html disconnects that will help
removable but maintain A mount weakened by easy support the shield
strength wind pressure per square foot = http://hyperphysics.phy- install or removability can
3) Strong mounts that are 0.00256 x the square of the wind astr.gsu.edu/hbase/torq.html break easier and possibly Have a safety tie that,
also easy to install and speed hurt the rider. incase of a mount failure
still are aesthetically will prevent it from
pleasing. Then the force on the centroid of the hurting the rider
shield can be roughly calculated.
With that the tourque on the mount
can be calculate my using T=Force*
Distance