Professional Documents
Culture Documents
Excellent RF performance in congested areas Remote control over Ethernet /RS232 /RS485 Easy set-up and control
Careful analogue design is the key issue to achieve the best The radio units have alternative ways of being remotely con- All parameters can be set and adjusted electronically from
collocation capabilities possible. The 7000 series of radios trolled, making them easy to fit into an existing infrastructure the front panel or from the remote interface. The front panel
is designed with no compromises regarding the synthesizers already available on the site. The radio units are controlled contains a graphical display, menu buttons and switches that
and analogue front end. This together with a linear power using SNMP v.2 (Simple Network Management Protocol) over are used to set up the radio – no external equipment like a PC
amplifier design, strictly controlled by an ultra fast digital sig- UDP (User Datagram Protocol), this together with 100BaseT or a signal generator are necessary to control the frequency
nal processor,makes the radio the ultimate choice for pro- Ethernet interface makes it easy to control the radios. Either or to adjust any parameter internally in the radio.
fessional G/Aapplications. by using Jotron’s dedicated Radio Access and Control Sys-
tem -RACS III or by a standard SNMP management applica- AM and D8PSK operation
Advanced digital signal processing (DSP) tion. Alternatively, set up and control can be done using the
serial RS232 or RS485 ports. The radio can be operated in the following modes: AM voice,
The receiver and transmitter use the most powerful digital AM data (ACARS) or D8PSK (VDL mode 2). The AM channel
signal processors to perform the intermediate frequency (IF) No tuneable parts bandwidth for voice operation (8.33 or 25 kHz) is automa-
and the audio frequency (AF) filtering. In addition, all the mo- tically selected by the frequency choice. AM-MSK mode is
dulation and demodulation tasks are performed in the signal There are no tuneable parts inside the radio units. used when the radio is operated as the physical ayer of an
processor. This means improved product control, less tunea- No tuning, or special tools are necessary when changing ACARS ground station. The D8PSK mode is used when the
ble parts and improved reliability. frequency / modulation or to maintain the radio. radio is operated as the physical layer of a VDL ground sta-
tion.
Most compact radio units available Keying options Offset operation
The receiver unit is a complete stand-alone receiver with Keying options available in the transmitter includes positive Setting the offset carrier is just as easy as setting the fre-
built in power supply weighting only 1.7 kg. The transmitter and negative voltages (up to 50V), keying to ground and quency of the transmitter. Up to 4 carriers offset is available
unit weights only 3.0 kg. A complete transceiver consists of phantom keying on the audio line. In addition the keying using the standard temperature controlled oscillator in the
3 units (transmitter, receiver and power supply) and the to- option includes in-band tone signalling both ways: ptt and transmitter. 5 carrier offset available upon request.
tal weight is only 6.0 kg. The modular and compact design squelch with configurable tones for easy integration with any
makes the radio the perfect choice for distant sites that are VCCS system.
hard to reach.
Continuous duty cycle
BITE system that detects failures
The transmitter is designed for continuous duty cycle. This
The BITE system continuously monitors vital points in the makes the radio the perfect choice for VOLMET and ATIS
radio units. An error is instantly detected and reported in applications requiring continuous transmission. The unique
multiple ways. The unique main/standby concept of the Jo- cooling concept used on the transmitter, keeps the tempera-
tron 7000 series can automatically switch the operation to ture low, and the operational lifetime of the equipment high.
a standby set upon an error, providing seamless com- muni-
cation for the user.
TECHNICAL SPECIFICATIONS
www.jotron.com
CONTACT INFORMATION
Jotron AS Jotron UK Ltd. Jotron Asia Pte. Ltd. Jotron USA, Inc.
P.O.Box 54 Crosland Park, Off Crowhall 19 Loyang Way, 10645 Richmond Avenue, Suite 140
3280 Tjodalyng Road Cramlington Changi Logistics Centre Houston, TX 77042
Norway Northumberland NE23 1LA, Rear Office Block 04-26 USA
Tel: +47 33 13 97 00 United Kingdom Singapore 508724 Tel: +1 713 268 1061
Fax: +47 33 12 67 80 Tel: +44 (0) 1670 712000 Tel: +65 65426350 Fax: +1 713 268 1062
sales@jotron.com Fax: +44 (0) 1670 590265 Fax: +65 65429415 contact.us@jotron-usa.com
sales@jotron.co.uk sales-asia@jotron-asia.com