NRP : 2108 030 021 Department : D3 Mechanical Eng. of FTI-ITS Advisor : Ir. Suhariyanto, MSc
ABSTRACT In the manufacturing of puli chips, there was cutting process. It was still using manual methods (manpower).So it takes A long time and the result was still used in small scale.
In this Final Project, a puli chips logs cutting machine
was designed. This tool uses chain conveyor to determine the thickness of pieces of chips. Cutting tool which is used using a single blade that moves by rotate and has a length of 43 cm so that cutting process can be performed four logs directly. There fore, this puli chips log cutting machine can be used by home industries.
From the calculation was obtained value engine capacity
was 1,54 kg/min, the power required was 85 Watt, uses a shaft machine diameter was 14,25 mm, while planning the shaft machine diameter was 12,88 mm. It uses a ball bearing type (ball bearing – single row – deep groove) with bearing number 6902z.
Key Word : A puli chips log machine, A blade, Cutting tool