Professional Documents
Culture Documents
DataType: umts_radio
A 41 27
nodeBId paShareRatio enableDPT
long:<default:0>
long:<default:0>
long:[0..65535] 1:Yes,
[0..50]
0:No
5025 0 0
maxUplinkCE maxDownlinkCE basebandPoolSwitch
1:Yes,
long:[1..65535] step 1 long:[1..65535] step 1 0:No
<default:1>
Indicate the maximum number of Indicate the maximum number of Indicate whether to enable the
Ces available for the NodeB Ces available for the NodeB Baseband Pool in Node B
uplink. downlink. function.
65535 65535 0
autoAssignBpResSwitch
{basebandPoolSwitch==0}[
1:{Yes},
0:{No}],
Indicate whether to automatically
{basebandPoolSwitch==1}[
allocate the baseband resource
0:{No}]
(BpDevice) for the local cell.
When the function is enabled,the
baseband resource will be
automatically allocated for local
cell, and user can not operate
Baseband Pool Object.
When the function is disabled,
the baseband resource will be
configuredR-W
by the user.
0
RESULT MODIND SubNetwork MEID
S:Success
A,D,M long:[0..999999] long:[0..999999999]
F:Fail
A:Add, D:Delete,
unique in an OMMB unique in subnetwork
M:Modify
A 41 27
A 41 27
sectorId userLabel band
3 3G_POPA_C 8
1 3G_POPA_A 8
txType txDevice rxType
long:<default:2>
1:No Diversity,
2:Diversity,
Tx Type Tx Device 9:2-RRU NOT DIV,
rx Type
long:<default:0>
4:2-RRU DIV,
0:No Diversity,
11:3-RRU NOT DIV,
2:2-RRU NOT DIV,
6:3-RRU DIV,
5:3-RRU NOT DIV,
8:4-RRU NOT DIV,
3:4-RRU NOT DIV, string
3:4-RRU DIV,
4:5-RRU NOT DIV,
10:5-RRU NOT DIV,
The7:6-RRU NOT DIV,
transmission type of 5:5-RRU DIV,
The receiving type of uplink
downlink8:MIMO,
signals, such as 12:6-RRU
(RackNo, ShelfNo, signals, such asNOT DIV, it is
whether
whether11:Dual Transmitand the
it is diversified
SlotNo):portNo;(RackNo, diversified7:6-RRU DIV,
and the diversity type.
diversity type. Different
ShelfNo, SlotNo):portNo Different13:MIMO(2RX)
receiving types can be
transmission types can be
eg:(51,1,1):1;(51,1,1):2 selected17:MIMO(4RX)
according to different
selected according to different 18:4-Diversity
application scenarios.
application scenarios.
R-W R-W R-W
0 (53,1,1):1 2
0 (51,1,1):1 2
rxDevice refQcellTxResGroup refQcellRxResGroup
(53,1,1):1;(53,1,1):2
(51,1,1):1;(51,1,1):2
RESULT MODIND SubNetwork MEID
A:Add, D:Delete,
unique in an OMMB unique in subnetwork
M:Modify
A 41 27
A 41 27
isAutoAssignBasebandResourc
localCellId userLabel
e
long:<default:1>
long:[0..268435455] string Only used1:Yes,
before NodeB
version V4.12.15.20(not
0:No
including V4.12.15.20). Indicate
whether to automatically
It represents the local cell ID. User-defined information.
allocate the baseband resource
You can set it within the value
(BpDevice) for the local cell. If
range. A local cell ID must be
automatic allocation is selected,
unique. It is an
the baseband resource will be
interconnection parameter,
automatically allocated for local
and must be consistent with
Primary Key R-W cell. If notR-W
selected, the
that of RNC.
baseband resource will be
50263 3G_POPA_C configured by the user.
50261 3G_POPA_A
priority refBpDevice USectorId refOperator
long:<default:0>
string long:[0..255] string
[0..63]
Fill in BPC and BPK's slot
It's valid only when number.
Automatically assign Pattern: BPSlot&BPSlot&...
baseband resource is If BPN or BPK_d, pattern:
Refers to the sheet "UMTS Please inpute
1. Range is from 0 to BPSlot#unit
63, priority is lower Sector" operator name
number&BPSlot#unit
when the value is number&...
smaller. Plus 20 for slot number of
R-W shelf 2'sR-W
BP board. R-I R-W-I
0 8#0&8#1 3 NA
0 8#0&8#1 1 NA
txFreq rcvFilterBandwidth cellRadius txOffset
unsiged long:<default:0>
long:<default:0> double:<default:255>
Maximum transmission 0:0-250km/h,
[-63..63] [0.01..200]
power of the local cell. It 1:250-350km/h
must be larger than or
equal to the transmission Terminal moving rate supported by
It is used to adjust the
power configured for RNC. the local cell. If it is set to relatively
uplink channel delay of
The sum of transmission high value (250-350km/h), the
the cell and the uplink
power of all local cells that baseband uplink adjustment
search window position.
the same RU power performance will be degraded.
amplifier bears must be
R-W R-Wthe rated
smaller than R-W
power (Pa.powewr).
0 255 0
0 20 0
enhancedVamEna
coverageType enableEnergySaving enableVAM
ble
Enable E-VAM
Coverage Type Enable electric-saving mode Support VAM function
function
unsiged unsiged
unsiged long:<default:1> unsiged long:<default:0>
long:<default:0> long:<default:0>
0:Indoor, 1:Yes,
1:Yes, 1:Yes,
1:Outdoor 0:No the power-
Indicate whether 0:No Indicate0:No
whether to
saving mode is used in the local Indicate whether VAM
enable E-VAM
cell. If the power-saving mode is function is enabled in
function when
used and the base station is the cell. This function
Cell coverage type, including indoor VAM function is
also configured with the power- can only be configured
coverage and outdoor coverage. enabled. If E-VAM
saving mode, the local cell will when the sector
is disabled, the
be blocked to save power when transmission type is
common VAM
the external power supply is MIMO.
R-W R-W R-W function
R-Wis used.
faulty.
1 0 0 0
1 0 0 0
enableDynCode
Enable dynamic
code
unsiged
long:<default:0>
1:Yes,
Configure0:No
whether
the dynamic code
resource allocation
function is enabled
in local cell. If it is
enabled, the service
performance will be
improved.
R-W
1
1
RESULT MODIND SubNetwork MEID ref1ULocalCell
ManagedElement
Modify Indication SubNetwork ID Primary Cell ID
ID
Result
S:Success long:
A,D,M long:[0..999999] long
F:Fail [0..999999999]
Refers to the sheet "UMTS Local Refers to the sheet "UMTS Refers to the sheet "UMTS
Cell" Local Cell"(Only available Local Cell"(Only available
when type is 0) when type is 0)
Relation Type
long:<default:0>
0:Multi Cell HSDPA,
1:Dual Band Dual Cell HSDPA,
2:Dual Cell HSUPA
Specify relation type of multi-carrier
cell.
R-W
RESULT MODIND SubNetwork MEID
S:成功
A,D,M long:[0..999999] long:[0..999999999]
F:失败
A:Add, D:Delete,
unique in an OMMB unique in subnetwork
M:Modify
long:[0..19] string
Indicate the baseband pool ID. It must Fill in BPC and BPK's slot
be unique and can be customized within number.
the value range. Pattern: BPSlot&BPSlot&...
If BPN or BPK_d, pattern:
BPSlot#unit number&BPSlot#unit
number&...
Plus 20 for slot number of shelf
Primary Key 2's R-W-I
BP board.
refULocalCell
string
R-W-I
RESULT MODIND SubNetwork MEID
Object ID of Qcell Tx Resource It indicates the related optical It indicates the Rx device
Group.. It must be unique and can port device. The optical port connected to optical port.
be customized within the value must be that of (RackNo, ShelfNo,
range. corresponding to PB1000. SlotNo):portNo;(RackNo,
(RackNo, ShelfNo, ShelfNo, SlotNo):portNo
SlotNo):portNo;(RackNo, eg:(51,1,1):1;(51,1,1):2
ShelfNo, SlotNo):portNo
Primary Key R-I
eg:(51,1,1):1;(51,1,1):2 R-I
RESULT MODIND SubNetwork MEID