Professional Documents
Culture Documents
Using PES and PVDF for the functional layer of the membrane and PET non-woven fabric as the base layer allows the membrane
to exhibit superior physical strength and chemical stability. Uniform 0.08µm pore size results in consistently high water
permeability with minimal pore clogging.
Each membrane cartridge is constructed by ultrasonically welding two membrane sheet and one non-woven space layer in the
middle. This designed make membrane cartridge compact and chemical in-line cleaning in place (CIP)
The membrane material of EcoSepro™ membrane sheet is permanent hydrophilic PES or PVDF. This combines the antifouling
property of hydrophilic membranes and high flux property and the chemical stability.
Only 3.0mm membrane sheet construction thickness is 1/2 of others flat-frame/plate membrane sheet construction. Therefore
the packing density can be much higher than others flat-frame/plate modules.
The pressure loss in permeate suction pipes is minimized because two permeate tubes (permeate channels) is located in the
central part of the membrane sheet. Because these designs, the pressure is uniform upon the membrane permeate and
Chemical inline cleaning.
Reduced module fouling from human hair and other obstructive substance. Therefore, it results in fewer chemical cleaning.