Professional Documents
Culture Documents
We note that each quantity is in general a function of position in space (here expressed in terms
of a position vector ~r, which will be dropped for compactness. Each quantity is a function of time
t unless where are considering an electrostatic situation.
Constitutive relations, which relate some of the parameters are, for simple (linear, isotropic,
reciprocal, non-dispersive, and homogenous) media:
~ r, t) = E(~
D(~ ~ r, t) (1)
~ r, t) = µH(~
B(~ ~ r, t) (2)
J~ (~r, t) = σ E(~
~ r, t), (3)
where , µ, and σ are the permittivity, permeability, and conductivity (respectively) of the medium
where the equations are evaluated. For the purposes of this course, we will only consider the case
where these quantities are scalars (i.e. not tensors, which are associated with anisotropic media).
Furthermore, we will restrict ourselves to µ = µ0 (non-magnetic materials only), and σ ≥ 0
(passive media). In free space, 0 = 8.854 × 10−12 F/m, µ0 = 4π × 10−7 H/m, and σ0 = 0 S/m.
It’s easiest to recall Maxwell’s equations by starting with some well-known relations we remember
from electrostatics, and the extending these relations to electrodynamics, from which Maxwell’s
equations are borne.
2 Gauss’ Law
Gauss’ law in integral form is
" ˚
~ r, t) · d~s = Q(t) =
E(~
ρv (~r, t)
dv, (4)
S 0 V 0
where Q(t) is the total charge enclosed by the surface S, or conversely the volume V . In simple
media, Gauss’ law is often written as
" ˚
~ r, t) · d~s = Q(t) =
D(~ ρv (~r, t)dv, (5)
S V
Prof. Sean Victor Hum ECE422: Radio and Microwave Wireless Systems
Review of Maxwell’s Equations Page 2
The divergence theorem allows a closed surface integral to be replaced by a volume integral, or vice
verse, depending on what is more convenient to evaluate. Equating the integrand of Equation (4)
with that of Equation (6), we have the first of Maxwell’s equations in so-called “differential” or
“point” form:
~ r, t) = ρv (~r, t).
∇ · D(~ (7)
Succinctly, Gauss’ Law says that electric flux densities always diverge away from electric sources
(charges).
For magnetic fields, no such singular source of magnetic fields lines is known to exist: even the
~ r, t) (or proportionately, B(~
simplest source of a magnetic field produces a magnetic field H(~ ~ r, t)) in
concentric circles that do not diverge, as shown in the illustration below. Similarly, an elementary
magnetic field source such as an infinite line current produces a magnetic field that encircles the
current filament, as shown.
Prof. Sean Victor Hum ECE422: Radio and Microwave Wireless Systems
Review of Maxwell’s Equations Page 3
Hence, "
~ r, t) · d~s = 0
B(~ (9)
S
and using the Divergence Theorem
" ˚
~ r, t) · d~s =
B(~ ~ r, t)dv 0 = 0,
∇ · B(~ (10)
S V
which yields
~ r, t) = 0.
∇ · B(~ (11)
This equation says that if one encloses a source of magnetic flux, the net flux density through the
enclosing surface must be zero. This is demonstrated graphically the drawing below, which shows
an arbitrary closed surface enclosing a source of magnetic field lines.
The divergence across the surface is zero, since for each magnetic field line that exits the surface,
there is a corresponding re-entrance of the field line at some other point on the surface, yielding
a net divergence of zero over the surface. Succinctly, this second law states that magnetic field
lines always formed closed loops, i.e., they do not diverge.
4 Faraday’s Law
You will recall in electrostatics that
˛
~ r) · d~` = 0.
E(~ (12)
C
The right hand side of this equation is zero due to the the conservative nature of a static electric
field. Like a gravitational field, the amount of net work done in moving a charge/object along a
closed path in the presence of a conservative field is zero.
Recall that Stokes’ theorem can be used to transform a closed line integral to a surface integral:
˛ ¨
~ r) · d~` =
E(~ ~ r) · d~s0 ,
(∇ × E)(~ (13)
C S
Prof. Sean Victor Hum ECE422: Radio and Microwave Wireless Systems
Review of Maxwell’s Equations Page 4
so
~ r) = 0
∇ × E(~ (14)
for electrostatics.
You will recall that in electrodynamics, the only difference with Faraday’s law is that the right
hand side of Equation (14) is no longer 0. Instead, in a closed circuit, a time-varying magnetic
field can induce an electromotive force (EMF) or voltage in the circuit equal to
˛
~ r, t) · d~` = − dΦ(t) ,
E(~ (15)
C dt
where we note the time dependence in the equation now, and recall that the (-) sign is due to
Lenz’ Law. Using Equation (8), we can subsequently write
¨
dΦ d ~ r, t) · d~s.
= B(~ (16)
dt dt S
We can move the time derivative inside the integral, bearing in mind that B(~ ~ r, t) is also a function
of position1 , yielding
¨ ~ r, t)
dΦ ∂ B(~
= · d~s. (17)
dt S ∂t
Applying Stokes’ theorem,
¨ ~ r, t) ˛ ¨ h
∂ B(~ ~ r, t) · d~` =
i
~ r, t) · d~s.
− · d~s = E(~ ∇ × E(~ (18)
S ∂t C S
5 Ampere’s Law
Maxwell’s fourth equation for electrodynamics comes from Ampere’s Law, which you may recall
for statics is: ˛ ¨
~ ~
H(~r) · d` = I = J~ (~r) · d~s. (20)
C S
Again, Stokes tells us that
˛ ¨ ¨
~ ~
H(~r) · d` = I = ~
[∇ × H(~r)] · d~s = J~ (~r) · d~s. (21)
C S S
Therefore,
~ r) = J~ (~r)
∇ × H(~ (22)
1
Note partial derivative
Prof. Sean Victor Hum ECE422: Radio and Microwave Wireless Systems
Review of Maxwell’s Equations Page 5
~ r, t) = ρv (~r, t)
∇ · D(~ (29)
~ r, t) = 0
∇ · B(~ (30)
~
~ r, t) = − ∂ B(~r, t)
∇ × E(~ (31)
∂t
~ ~
~ r, t) = J~ (~r, t) + ∂ D(~r, t) = J~src (~r, t) + σ E(~
∇ × H(~ ~ r, t) + ∂ D(~r, t) . (32)
∂t ∂t
Prof. Sean Victor Hum ECE422: Radio and Microwave Wireless Systems
Review of Maxwell’s Equations Page 6
In the last equation, the current density J~ (~r, t) has been split into a source term J~src (~r, t),
which is imposed by an external source, and a conduction current density term σ E(~ ~ r, t) which
results from conduction losses in the material. An important observation about these equations
is that the terms ρv (~r, t) and J~src (~r, t) are the ultimate sources or driving terms for all the other
quantities in Maxwell’s equations. In fact, the equation of continuity (24) relates ρv (~r, t) and
J~src (~r, t), so ultimately, electric currents are responsible for producing all of the field quantities
in Maxwell’s equations. An antenna is simply a conducting structure along which electric currents
are formed to produce fields that propagate on their own into space.
The equation
cos(ωt + φ) (34)
can be written as
Re ej(ωt+φ) = Re ejωt · ejφ .
(35)
We write the phasor form of E~ by dropping the harmonic term and removing the Re() to create
a general complex quantity:
~ r)ejφ .
E(~r) = A(~ (36)
Note the use of the bold Roman symbol to denote phasor-vector quantities. To convert back to
the general real time-varying vector field, simply multiply by ejωt and take the real part. Think of
this as a sort of “phasor transform”:
~ r, t) = Re E(~r)ejωt .
E(~ (37)
∂
Therefore, we simply replace ∂t
by jω when we have harmonic time dependence. Maxwell’s
equations in phasor form are:
~ r,t)
Consider the evaluation of ∇ × E(~~ r, t) = − ∂ B(~ using the frequency domain representation of
∂t
the fields and an inverse Fourier transform:
ˆ ∞ ˆ
1 ~ r, ω)ejωt dω = 1 ∂ ∞ ~
∇× E(~ − B(~r, ω)ejωt dω (45)
2π −∞ 2π ∂t −∞
ˆ ∞h ˆ ∞h
1 i
~ r, ω)ejωt dω = 1 i
~ r, ω) ejωt dω.
∇ × E(~ −jω B(~ (46)
2π −∞ 2π −∞
Equating integrands,
~ r, ω) = −jω B(~
∇ × E(~ ~ r, ω), (47)
demonstrates that the resulting form of Maxwell’s third equation is similar to the phasor form.
The same can be shown for the other three equations.
= 0 − j00 (48)
Prof. Sean Victor Hum ECE422: Radio and Microwave Wireless Systems
Review of Maxwell’s Equations Page 8
where 00 = ωσ > 02 To see how this comes about we consider Maxwell’s curl equation for H in
a source-free region (J src = 0). Since σ is nonzero now, a conduction current density J = σE
will be produced, and the equation becomes:
9 Poynting Vector
Let’s consider a quantity quantity P (~r), called the time average Poynting vector, as follows3 :
1
P (~r) = E(~r) × H ∗ (~r). (54)
2
Since the units of E are V/m, and the units of H are A/m, we can see the units of P are W/m2 .
Hence, P (~r) represents the power density of the fields in question4 .
Knowing the power density, the total time-average power leaving a closed surface S can be found
as " "
1 ∗
W = (E(~r) × H (~r)) · ds = P (~r) · ds. (55)
2 S S
The concept of power and power density is very important in RF systems because the performance
of the communication system is directly determined by the received signal power at the receiver.
The reason for this is that the presence of noise in all systems degrades signal quality, and we
know that noise is described in terms of power densities. Hence, to overcome a given noise power,
we must have sufficient signal power, in order to accurately detect a signal.
Example: Show that the time-average Poynting vector for a uniform plane wave travelling in
free space in the +z direction is5
|E0 |2
P = ẑ. (56)
2η0
2
Usually, in advanced texts, 00 is used to account for the damping of the vibrating dipole moments (complex
electric susceptibility) produced in lossy dielectrics, and ohmic losses produced by σ treated separately. However,
here we will assume the bulk of the loss originates from the medium’s conductivity, rather than damping.
3
In ECE320, time-average Poynting vector only considered the real part of P (~r), but in general, power flux
density can have both real and imaginary parts.
4
Note that S is used in some books (e.g. Ulaby) to denote power density. Since we will be carrying out surface
integrals over a surface denotes by S, we choose P for clarity.
5
You may need to consult the notes on uniform plane waves first.
Prof. Sean Victor Hum ECE422: Radio and Microwave Wireless Systems
Review of Maxwell’s Equations Page 9
1
P = E × H∗ (57)
2 ∗
1 −jk·r 1 −jk·r
= E 0e × n̂ × E 0 e . (58)
2 η
This result shows that the power delivered by a uniform plane wave is in the same direction as its
k-vector.
Prof. Sean Victor Hum ECE422: Radio and Microwave Wireless Systems