Prosiens + 224
PROBLEMS
Sl. Determine the force in each member of the truss
and state if the members are in tension or compression,
Set P; = 800 KN and P; = 400 KN.
52, Determine the force on each member of the truss
‘and state if the members are in tension or compression,
‘500 KIN and Py = 100 KN.
Set P;
m Prabs 5-12
5-3, ‘The truss, used (0 support a balcony, is subjected to
the loading shown. Approximate each joint as a pin and
termine the force in each member. State whether the
‘members are in tension or compression. Set Py = 600 KN,
Py = 400 KN,
5.4, The (russ, used to support a balcony, is subjected
to the loading shown, Approximate each joint as a pin
and determine the force in each member, State whether
the members are in tension or compression. Set
Py = 800 KN, P2 =
P, 1
A |,
al a a
4m.
z.
2
ee
55, Determine the force in each member of the teuss
and state if the members are in tension or compression.
‘Assume each joint as a pin. Set P= 4 KN.
5-6, Assume that each member of the truss is made of
steel having @ mass per length of 4 kp/m. Sct P= 0,
determine the farce in each member, and indicate if the
members are in tension or compression. Neglect the
‘weight of the gusset plates and assume each joint isa pin
Solve the problem by assuming the weight of each
‘member can be represented as a vertical force, half of
‘which is applied at the end of each member.
|
4m am
T
Prods. 516
51, Determine the force in each member of the truss
and state if the members are in tension or compression,
Bin ox2+ CHAPTER 5 Structural Analysis
‘& Determine the force in each member of the truss
d state if the members are in tension or compression,
UPS 2KN and Py = 1.5 KN.
4. Determine the force in each member of the trust
4 state if the members are in tension or compression.
tReR
5:12, Determine the force in each member ofthe truss
and state if the members are in tension or compression.
Set P, = IOKN, P; = 1S KN.
543. Determine the force in each member of the truss
and state if the members are in tension or compression,
Set Py = 0, P= 20KN.
Prabs. 819
(0. Determine the force in each member of the truss
d state if the members are in tension or compression.
UPL = 0, Pp = 100 KN,
UL. Determine the force in each member of the truss
state if the members are in tension or compression,
LP) = SOKN, Pa = 150 kN.
5:14, Determine the force in each member of the truss
and state if the members are in tension or compression.
Set Py = 1OKN, Py = 20 KN, P3 = 30 KN,
545, Determine the force in each member of the truss
and state if the members are in tension or compression,
Set Py = 40 KN, P, = 40 KN, Ps = 0.
Prohs, 10/11
robs, 14/15