Professional Documents
Culture Documents
DESCRIPTION
In XM application V2.3 we introduced wireless communication for use with the 3COM 275
USB Dongle (kit part number ABR05-053822) and fits in the USB port underneath the scale.
The purpose of this document is to detail the configuration.
RECOMMENDED ACTION
Page 1 / 2
Technical Bulletin
Once in Manager Mode go to Machine Setup > Comms Setup > Wireless Setup
These settings can only be accessed if the USB RF Device can be detected by the application.
Care Notes:
• Please note that we currently only recommend infrastructure mode
• When configuring the IP address of the RF Dongle then this must be on a different
subnet mask to the wired IP address
© Avery Berkel 2010. All rights reserved. This publication is issued to provide outline information only
which, unless agreed in writing by Avery Berkel, a division of ITW Limited, may not be regarded as a
representation relating to the products or services concerned. Avery Berkel reserves the right to alter
without notice the specification, design, price or conditions of supply of any product or service.
Page 2 / 2