You are on page 1of 2

Dual-Band Combiner

806 – 960 MHz 1710 – 2170 MHz


CDMA 800 / GSM 900 GSM 1800 / UMTS

• Designed for co-siting purposes


• Enables feeder sharing Port 3

• Can be used as a combiner near the BTS or


in a reciprocal function near the antenna Port 1

• Suitable for indoor or outdoor applications


• Wall or mast mounting
793 532
• Available as a single unit, or for XPol anten- Single Unit
nas as a double unit Port 2
• DC by-pass between all ports
• DC stop available as an accessory

793 533
Double Unit

Typical Attenuation Curves


Diagram I
Single Unit 793 532 Port 1 ↔ Port 3 Port 2 ↔ Port 3
0
Attenuation/dB

Double Unit 793 533


(only 1 unit shown) 10
2000 – 2170
20
806 – 960 1710 – 2000
30
Technical Data
40

Type No. 793 532 793 533 50


Single Unit Double Unit
60
Pass band 70
Band 1 806 – 960 MHz
Band 2 1710 – 2170 MHz 80

Insertion loss 90
Port 1 ↔ Port 3 Typically 0.15 dB (806 – 960 MHz)
Port 2 ↔ Port 3 Typically 0.25 dB (1710 – 2000 MHz) 100
Typically 0.35 dB (2000 – 2170 MHz) 500 700 900 1100 1300 1500 1700 1900 2100 2300 2500

Isolation Frequency/MHz
Port 1 ↔ Port 2 > 45 dB (806 – 824 MHz)
> 50 dB (824 – 960 MHz)
> 50 dB (1710 – 2170 MHz) Diagram II
VSWR < 1.2 (806 – 960 / 1710 – 2170 MHz) Port 1 ↔ Port 3 Port 2 ↔ Port 3
0
Attenuation/dB

Impedance 50 Ω
0.1
Input power
Subject to alteration.

Band 1 < 250 W 0.2


Band 2 < 200 W
0.3
Intermodulation products < –160 dBc (2nd/3rd order; with 2 x 20 W)
0.4
Temperature range –55 ... +60 °C
Connectors 7-16 female 0.5

Application Indoor or outdoor (IP 66) 0.6


2000 – 2170
Special features DC by-pass between all ports (max. 2500 mA)
936.2137/e

0.7
Mounting Wall mounting: With 4 screws (max. 8 mm diameter) 806 – 960 1710 – 2000
0.8
Mast mounting: With additional clamp set
Weight 1.6 kg 3.0 kg 0.9

Packing size 350 x 165 x 138 mm 350 x 165 x 190 mm 1.0


500 700 900 1100 1300 1500 1700 1900 2100 2300 2500
Dimensions (w x h x d) 125 x 282 x 61.2 mm 125 x 282 x 111.6 mm
Frequency/MHz
(including mounting brackets)

Internet: http://www.kathrein.de 793 532, 793 533 Page 1 of 2


KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494
Dual-Band Combiner
806 – 960 MHz 1710 – 2170 MHz
CDMA 800 / GSM 900 GSM 1800 / UMTS

234
Accessories (order separately)

61.2*
Clamp set Clamp Set Side view

40.5*

31.5
Type No. suitable for mast 793 532
M6 Single Unit
diameter of
281.8
734 360 34 – 60 mm
734 361 60 – 80 mm
734 362 80 – 100 mm
734 363 100 – 120 mm
DC stop
734 364 120 – 140 mm

*
734 365 45 – 125 mm

*
Side view
Type No. Description 793 533
Double Unit
793 301 DC stop
784 10367 50-Ω load 1.5 W * Valid if labelled “Dual-Band Combiner V1“ (not valid for previous version
indoor or outdoor 50-Ω load labelled “Dual-Band Combiner“

Earthing Instruction
Top view
793 532
Single Unit,
793 533
Double Unit

Toothed washer
Earthing cable
(not included in the ➀ ➂
scope of delivery)
Washer
Earthing screw
Torque 6-7 Nm Bottom view
➁ ➃
793 532
Single Unit,
4 screws M5 x 10 793 533
4 spring washers Double Unit
5.5 DIN 6095

Please note: The mounting plates of products labelled “Dual-Band Combiner V1“ can be removed by loosening the screws 1 to 4 (M5 x 10) and replaced
Subject to alteration.

with other means of mounting, always provided that the max. drilled depth of 8.5 mm is respected with the choice of replacement screws.
If the label deos not contain the suffix “V1“ then IP66 protection will be lost and all corresponding guarantees will become null and void, if
mounting brackets are removed or tampered with.
As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks
that may arise when products are used under extraordinary operating conditions.
Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures),
may result in the breakage of a mast mounted device or even cause it to fall to the ground.
These facts must be considered during the site planning process.
936.2137/e

The Dual-band Combiners are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E and have
passed environmental tests as recommended in ETS 300 019-2-4.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
The details given in our data sheets have to be followed carefully when installing the antennas, filters, combiners, amplifiers and
accessories.
The limits for the coupling torque of RF connectors, recommended by the connector manufacturers must be obeyed.
Terminate unused inputs with a suitable 50 Ohm load, e.g. 784 10367.
Any previous datasheet issues have now become invalid.

Page 2 of 2 793 532, 793 533 Internet: http://www.kathrein.de

KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494

You might also like