Professional Documents
Culture Documents
<World>:
Specify point on X-axis or <accept>:
Specify point on the XY plane or <accept>:
Command:
Command:
Command:
Command:
Command: CYL
CYLINDER
Specify center point of base or [3P/2P/Ttr/Elliptical]: 60,56
Command: cyn
Unknown command "CYN". Press F1 for help.
Command: CYL
CYLINDER
Specify center point of base or [3P/2P/Ttr/Elliptical]: 60,-56
Command:
Command: CYL
CYLINDER
Specify center point of base or [3P/2P/Ttr/Elliptical]: 60,-56
Command:
Command: POLYSOLID
Height = 4.0000, Width = 0.2500, Justification = Center
Specify start point or [Object/Height/Width/Justify] <Object>:
Specify next point or [Arc/Undo]:
Specify next point or [Arc/Undo]: *Cancel*
Command:
Command: LINE
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: JOIN
4 found
4 objects converted to 1 polyline
Command:
Command: EXT
EXTRUDE
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
1 found
Command:
Command:
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command: _u menu item
Command: _u GROUP
Command: _u SUBTRACT GROUP
Command:
Command:
Command: _u menu item
Command:
Command:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Checking 595 intersections...
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Automatic save to
C:\Users\Faiz_Muttaqin\appdata\local\temp\Drawing1_1_1_7627.sv$ ...
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command:
Command:
Command: SUBTRACT
Select solids, surfaces, and regions to subtract from ..
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command: FILLET
Command: *Cancel*
Command: _u INTELLIPAN INTELLIZOOM
Command: _u FILLET
Command: UCS
Command:
Command:
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
1 found
_MO Closed profiles creation mode [SOlid/SUrface] <Solid>: _SO
Command:
Command:
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Command: *Cancel*
Command:
Command: F
FILLET
Current settings: Mode = TRIM, Radius = 15.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius or [Expression] <15.0000>: Specify second point:
Select an edge or [Chain/Loop/Radius]:
Select an edge or [Chain/Loop/Radius]:
Resuming FILLET command.
Command:
Command: _u menu item
Start of Group encountered.
Must enter UNDO END to go back further.
Command: _u GROUP
Command: _u INTELLIPAN INTELLIZOOM
Command: _u FILLET
Command: F
FILLET
Current settings: Mode = TRIM, Radius = 15.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius or [Expression] <15.0000>: *Cancel*
No fillet to be computed.
Command: F
FILLET
Current settings: Mode = TRIM, Radius = 15.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius or [Expression] <15.0000>: Specify second point:
Select an edge or [Chain/Loop/Radius]:
Resuming FILLET command.
Command:
Command:
Command: _.erase 1 found
Command:
Command:
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: _u menu item
Command: _u GROUP
Command: _u INTELLIZOOM GROUP
Command: _u INTELLIZOOM GROUP
Command: _u INTELLIZOOM GROUP
Command: _u INTELLIZOOM GROUP menu item
Command: _u INTELLIZOOM
Command: _u ERASE GROUP menu item
Command: _u INTELLIZOOM INTELLIZOOM INTELLIZOOM INTELLIZOOM INTELLIZOOM INTELLIZOOM
INTELLIPAN INTELLIZOOM INTELLIZOOM INTELLIZOOM INTELLIZOOM
Command: _u FILLET
Command: F
FILLET
Current settings: Mode = TRIM, Radius = 15.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: R
Specify fillet radius <15.0000>: 20
Command: F
FILLET
Current settings: Mode = TRIM, Radius = 20.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius or [Expression] <20.0000>: Specify second point:
Select an edge or [Chain/Loop/Radius]:
Select an edge or [Chain/Loop/Radius]:
Command:
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command: _union
Select objects: *Cancel*
Command:
Command: _ai_selall Selecting objects...done.
Command:
_AI_SELALL
Selecting objects...done.
Command:
Command:
Command:
Command: _union
Select objects: *Cancel*
Command:
Command: _ai_selall Selecting objects...done.
Command:
_AI_SELALL
Selecting objects...done.
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: UNION
Select objects:
Resuming UNION command.
Select objects:
Resuming UNION command.
Select objects:
Resuming UNION command.
Select objects:
Resuming UNION command.
Select objects:
Resuming UNION command.
Command:
Command: _.erase 1 found
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: UNI
UNION
Select objects: 1 found
Select objects:
Automatic save to
C:\Users\Faiz_Muttaqin\appdata\local\temp\Drawing1_1_1_7627.sv$ ...
Command: