1. _____________is a graphical representation of the features and/or components in the
model a) Extrude b) Sketcher c) Model Tree d) Save & Print 2. In CREO, can a drawing be taken for more than one assembly a) Yes b) No c) Can’t be predicted 3. In CREO,can the units of the part be changed without changing the size of the part a) Yes b) No c) Can’t be predicted 4. Creo drawing in 2D can be done in _____ mode a) Extrude b) Sketcher c) Model Tree d) Save & Print 5. A 2D drawing can be changed to a 3D one by using ___________ a) Revolve b) Extrude c) Both d) None 6. The trim option in AutoCAD is replaced with ________command in CREO a) Coincident b) Reference c) Normal d) Delete Segment 7. The dimensions can be edited by using ________command a) Coincident b) Reference c) Normal d) Delete Segment 8. The selction of the file location can be found in the following option a) Manage session b) Selecting Working Directory c) Both d) None 9. The conversion of CREO model file to pdf can be done through________ a) Print b) Save as c) Open d) Options 10. The creo part models can be saved with extension _________ a) .prt b) .dwg c) .skt d) .asm 11. The constraint used for the base part in an assembly is _________ a) Fix b) Coincide c) Parallel d) Allign 12. The value of the length of the beam can be given to ANSYS in ____________ a) Pre processor b) Post prossesor c) Solver d) All the above 13. The process of defining the given model in the form of required no.of small areas for anlysis is called _____ a) Analyzing b) Meshing c) Modeling d) Solving 14. The creo assembly models can be saved with extension _________ a) .prt b) .dwg c) .skt d) .asm 15. The edges of the object can be taken as perfect limit for the next sketch by considering ________command a) Coincident b) Reference c) Normal d) Delete Segment 16. The revolve command need to have predefined ________ to get a solid object from a 2D figure a) Axis of rotation b) Parallel lines c) Circular path d) Angle of inclination 17. User defined planes can be created in CREO by using ________option a) Centre plane b) Plane c) References d) Mirror 18. In Ansys is a ______type of software a) Design b) Analysis c) Both d) None 19. Creo View express can perform the following__________ a) Sketching b) Drafting c) Both d) None 20. CREO parametric is a _________based software a) Feature b) Point c) Constraint d) None