Professional Documents
Culture Documents
Atlas Copco presents the latest in rotary drilling equipment – Focus rotary drill bits.
This new range is designed to withstand the ever-increasing forces and rotational
speeds of today’s rotary drill rigs while offering market-leading performance. State-
of-the-art engineering has resulted in new designs and insert shapes that facilitate
excellent penetration rates in both soft rock and hard abrasive rock. In fact, there are
up to 320 different models to fulfill the needs of professional Rotary drillers.
Details make the difference shaped inserts for very hard rock or
Focus rotary bits are available as conically shaped inserts for softer rock.
milled steel-teeth bits or as tungsten
carbide insert (TCI) Tricone bits. The number of rows of inserts
is directly related to the type of
Milled steel-teeth bits can be hardened application and the size of hole to be
and surfaces treated with carbide for drilled. There are also open and sealed
extra resilience. They are ideal for soft bearings available as well as three types
to medium hard rock. of shirttail protection to choose from.
TCI Tricone bits offer a variety of Finally, Focus rotary bits can use both
carbide inserts such as spherically fluid and air circulation.
Waterwell drilling
Drilling for water is a demanding
operation where rock conditions can
vary from work site to work site. With
Focus rotary bits, there is a multitude of
cone designs with both open and sealed
bearings to match these conditions.
Bits are available from 2 15/16" to 6
¾" in diameter with milled steel-teeth
or with tungsten carbide inserts. They
are also designed for center fluid and
air flushing.
bearings and shirttails are often subject to facilitate the best protection for the
to three-shifts a day in hard abrasive drill bits.
rock. TCI Tricone bits for mining are
This requires the best Focus has to offer available from 4 ¾" to 12 ¼" in
– TCI Tricone bits. They are equipped diameter.
with large roller bearings that can take
maximum load, specially designed The range
Mining
flushing holes for effective cooling and Focus rotary drill bits come in
Focus rotary bits are put to the test cuttings removal, specially designed 320 different models from small milled
when drilling blastholes in mines. The cone heads and inserts for maximum steel-teeth bits to multiple row, carbide
environment is tough, and inserts, penetration and three shirttail designs insert TCI Tricone bits.
Product line
Cutting
structures 4-1 to 4-4 5-1 to 5-4 6-1 to 6-4 7-1 to 7-4 8-1 to 8-4
Steel Tooth Waterwell Bits 2 1/2"– 3 7/8"
Product Weight Operating Suggestions
Bit Diam. Product Code IADC Product Special Features Circ. Pin Conn.
No. lbs kg WOB / RPM
Subjected to alterations without prior notice. © Atlas Copco Secoroc AB. All rights reserved. 2009.03
93002201 112-3130-51-FW-FR-02 5-1-2 F5 Chisel Inserts Regular 22.0 10.0 2 7/8" API
130 mm 70 to 120 RPM
5 1/8" 17,900-33,300 lbs WOB
93002174 112-3130-52-FW-FR-01 5-2-1 F5 Chisel Inserts Regular 22.0 10.0 2 7/8" API
130 mm 70 to 120 RPM
5 1/8" 17,900-33,300 lbs WOB
93002202 112-3130-52-FW-FR-02 5-2-2 F5 Chisel Inserts Regular 22.0 10.0 2 7/8" API
130 mm 70 to 120 RPM
9851 2639 01