Professional Documents
Culture Documents
(OR)
3) A mild steel ring of circumference 50 cm and cross sectional area of 5 cm2 has a coil of 250
turns wound around it. Calculate: (a) The reluctance. (b) The current required to produce a flux of
700 mWb. The relative permeability µr=380.
4) a) Calculate the reactance of a 2μF capacitor at: (i) 50 Hz. (ii) 2.5 kHz. (iii) 1.5 MHz.
b) In a series parallel circuit, the two parallel branches A and B are in series with C. The
impedances are Za= 10 + j8, Zb= 9 – j6 and Zc = 3 + j2 Ω voltage across Zc = 100+ j0 V. Find the
branch currents and phase angles.
(OR)
5) Determine the total current, power factor and power consumed by the circuit shown in figure
below.
6) Find the current through 2 ohms resistor in the network shown below by Thevenin’s and Norton’s
equivalents.
(OR)
7) In the network shown below determine:
(a) The value of load resistance to give maximum power transfer.
(b) The power delivered to the load.
8) In the network shown in figure below, what load ZL will receive maximum power.
(OR)
9) Find the power loss in 5 resistor by superposition theorem.
10)
11)