Professional Documents
Culture Documents
Page Cl/Tab/Fig
DESIGN FORCE DETAILS
Total Shear Force = 518 kN
BOLT DETAILS
Bolt Diameter d = 24 mm
Shear Area/Tensile Sress Area As,At = 0.8xπx24x24/4
= 362 mm2
PLATE DETAILS
Min. Thickness of the connected plate tp = 20 mm
Check for Packing Ok, Packing within the limit
Steel Grade S 355
2
136 T(32) Bearing strength of Connected plate pbs = 550 N/mm
HOLE DETAILS
136 Cl 6.3.3.3 Hole type Short slotted holes
136 Cl 6.3.3.3 kbs = 0.7
132 Cl 6.2.2.1 End distance e = 40 mm
= 1
135 Cl 6.3.3.3 Reduction due Large Grip Lg<5d, Reduction is not required
Reduction Factor =
= 1
135 Cl 6.3.2.5 Reduction due Long Joints Lj<500, Reduction is not required
Reduction Factor =
= 1
136 Cl 6.3.3.3 Bearing capacity of the connected part Pbb = MIN( kbsdtppbs or 0.5kbsetppbs )
= MIN[(0.7x24x20x550/1000)
OR (0.5x0.7x40x20x550/1000)]
= 154 kN
> 130 kN
Ok, Bearing capcacity of plate is adequate
Page 2/3
BLOCK SHEAR CHECK
134 F(22) Lv = 100 mm
134 F(22) Lt = 135 mm
133 Cl 6.2.4 k = 2.5
133 Cl 6.2.4 Dt = 40
27 Cl 3.4.3 Ke = 1.1