You are on page 1of 26

PARTS MANUAL

Hydraulic Breaker

EHB20
Document No.: AA099-0006 Revision Date: 2010-06-25
INSTRUCTIONS FOR USE

 This parts manual describes the configuration of the part components of the product and is intended only to assist to
order spare parts for maintenance work

 This manual contains no safety information for operating the product or maintenance work. Please observe the
safety instructions described in the relevant operation manual.

 The illustrations shown in this manual is not appropriate for workshop instructions, so they should not be used for
assembling or disassembling the product. Please refer to the workshop manual for that purpose.

 Use Everdigm genuine parts only.


Warranties do not cover damages that have been caused or aggravated by use of non-genuine parts.

 For product warranty, please refer to the warranty conditions provided separately.

 The illustrations in this manual show only the overall shapes and positions of the part components so they may not
be identical with the actual parts.

 For the purpose of continued product improvement, some information in this manual could be changed without prior
notice, and might be differ from your product which was not covered by this publication.

 If you found the information that is unclear or not corresponding with the actual product, contact Everdigm or
Everdigm distributor.

How to use this parts manual:


<Example>

EX-20 – CYLINDER UNIT


1 2
3 4 5 6 7 8

ITEM PART NO. PART NAME QTY S/N REMARKS


+ X123-9001 Cylinder Unit 2
1 X123-1001 Cylinder Housing 1
2 X123-9002 Rod Cover Ass’y 1
3 X123-1002 -Rod Cover -1 ~199 [R X123-1002A]
X123-1002A -Rod Cover -1 200~
4 A456-2001 -Slide Seal -2 [K1]
4-1 A456-2002 --Seal Ring --1 [K1] [D]
4-2 A456-2003 --O-Ring --1 [K1] [D]
5 A456-2004 -Dust Wiper -1 [K1]
6 X123-1003 Rod 1
7 X124-1005 Piston 1
  
  
  

1. Model name: Identification name of the product

2. Title: Title name of the assembly shown in the page

-2-
3. Item: Key number which shows the referring number of the part in corresponding illustration.
For a revised part which replaces the old one with same item number, the item is not shown.
Item numbers are not always in sequence.
+..... Represent the title assembly containing the entire part in the illustration.
* with the same item number..... Represent selectable parts depending on product version.

4. Part No.: Identification number of the part or assembly.


The part number might be omitted when the part cannot be supplied separately.

5. Part Name: Part name of the part.


The parts without a prefix in front of the part name are independent component parts or
subassemblies belong to the title assembly in corresponding list.
Prefix ‘-‘…. The parts marked with the prefix ‘-‘ in front of the part name are component parts
belong to the subassembly shown above of the rows of these parts.
Prefix ‘--‘… The parts marked with the prefix ‘--‘ are component parts of the ‘-‘ marked
subassembly containing these parts.

6. Qty: Quantity used for one unit of their parent assembly containing the parts.
When the quantity of the title assembly is blank, refer to the page shown with ‘►’, but when it is
not blank, it represents the quantity used for one unit of the product.
For the parts with the prefix ‘-‘ or ‘--‘ in front of their part name, the quantity is expressed with that
prefix.
AR… As many as required (variable quantity depending on the product)

7. S/N: Serial number of the product which those parts are applied
Parts without serial no. indications are used in every product regardless of serial number.

8. Remarks: Supplementary comment. Refer to the following for the code within [ ].
A….. The parts with this code can be used interchangeably with each other.
R….. The part with this code is no longer manufactured as a result of a revision and replaced by
the new part whose part number follows this code.
K….. The part with this code is contained in the service kit whose item number follows this code.
D….. The part with this code cannot be supplied separately. The assembly part containing this
part should be ordered.
S….. Non-standard part which can be supplied by separate order

How to order parts:


Please note the full model name and serial number of your product. This code can be found on the nameplate of your
product. Compare the parts to order with the corresponding parts in the drawings in this parts manual and note the part
numbers to order.

When ordering parts, please specify detail part names as shown in the following example,
 Model name of product: EX-20
 Serial number: 135
 Part No.: A123-4567
 Part name: Pin
 Quantity: 2
 Purchaser’s name & address: ....

-3-
EHB20-Rev0/100625

TABLE OF CONTENTS

INSTRUCTIONS FOR USE............................................................................................................................... 2

EHB20 – Product Dimensions ........................................................................................................................... 5

EHB20 – Power Cell Ass’y ................................................................................................................................ 7

EHB20 – Cylinder Ass’y .................................................................................................................................... 9

EHB20 – Valve Ass’y........................................................................................................................................10

EHB20 – Cylinder Bush Ass’y........................................................................................................................... 11

EHB20 – Back Head Ass’y ...............................................................................................................................12

EHB20 – Front Head Ass’y ...............................................................................................................................13

EHB20 – Accumulator Ass’y .............................................................................................................................14

EHB20 – Swivel Joint .......................................................................................................................................15

EHB20 – Seal Kit .............................................................................................................................................16

EHB20 – Tools (Chisels) ..................................................................................................................................17

EHB20 – Bracket Ass’y; BA ..............................................................................................................................19

EHB20 – Mounting Adapter and Hoses .............................................................................................................20

EHB20 – Gas Charging Kit ...............................................................................................................................21

EHB20 – Maintenance Tool Kit .........................................................................................................................23

Copyright © 2010 Everdigm Corp. All rights reserved.


This manual is copyrighted by Everdigm Corp. with all rights reserved in accordance with prevailing law. It is positively
prohibited to use or reproduce its contents in whole or in part without prior written permission.

-4-
EHB20-Rev0/100625

EHB20 – Product Dimensions


Unit: mm (inch)

EHB20-BA

-5-
EHB20-Rev0/100625

EHB20 – Power Cell Ass’y

902
805
901
804

400 803

300 801
200

800

603
600
604 100
605
601
602

701
700
702

802

500

-6-
EHB20-Rev0/100625

EHB20 – Power Cell Ass’y


ITEM PART NO. PART NAME QTY S/N REMARKS

+ B202-9901 Power-cell Ass’y 1

100 B202-9801 Cylinder Ass’y 1

200 B251-9802 Valve Ass’y 1

300 B200-9803 Cylinder Bush Ass’y 1

400 B202-9804 Back Head Ass’y 1

500 B202-9805 Front Head Ass’y 1

600 B251-9806 Pressure Adjuster Valve Ass’y 1


601 A082-0076 -Pressure Adjuster Valve -1
602 A082-0048 -Adjuster Nut -1
603 S8000301 -O-ring -1 [K5]
604 S8000181 -O-ring -1 [K5]
605 S8060181 -Back-up Ring -1 [K5]

700 B200-9807 Accumulator Ass’y 1


701 B200-9902 -Accumulator Ass’y -1
702 A011-0005 -Hex. Socket Bolt -8

800 B200-0602 Through Bolt Kit 4


801 B200-6001 -Through Bolt -1
802 B220-6003 -Front Head Nut -1
803 B220-6005 -Back Head Bush -1
804 B220-6002 -Back Head Washer -1
805 B220-6001 -Back Head Nut -1

901 A062-9002 Swivel Joint 2


902 S2215361 Hex. Socket Bolt 12 M12x1.75xL35-10.9T

-7-
EHB20-Rev0/100625

EHB20 – Cylinder Ass’y

120
106
113
107
113 125
112
120
118
107
110 113
116
123
111 105
114 101

108
116 113
110 107 115

117
114 119
111
113 121
107
122
113
107
115
124 114
109
111
113

106

102 102-1
102-2
103

104

-8-
EHB20-Rev0/100625

EHB20 – Cylinder Ass’y


ITEM PART NO. PART NAME QTY S/N REMARKS

+ B202-9801 Cylinder Ass’y 1

101 B202-1001 Cylinder 1


102 A053-0054 Buffer Ring 1 [K2]
102-1 -Seal Ring -1 [K2] [D]
102-2 -Back-up Ring -1 [K2] [D]
103 A053-0055 U-Packing 1 [K2]
104 A054-0036 Dust Seal 1 [K2]
105 B202-1002 Piston 1
106 A061-0002 Plug 2 BSP 1/4
107 A061-0034 Plug 6 BSP 1/4
108 A061-0050 Plug 1 BSP 1/2
109 A061-0003 Plug 1 BSP 1/2
110 A061-0015 Plug 2 BSP 3/4
111 2181-1890D003 Plug 3 BSP 3/8
112 A061-0024 Plug 1 BSP 1
113 S8000111 O-ring 8 [K5]
114 S8000141 O-ring 3 [K5]
115 S8000181 O-ring 2 [K5]
116 S8000241 O-ring 2 [K5]
117 S8010251 O-ring 2 [K5]
118 S8000291 O-ring 1 [K5]
119 S8090251 Back-up Ring 1 [K5]
120 A053-0085D024 Static Seal 2 [K5]
121 A082-9006 Speed Valve Ass’y 1
122 S2212361 Hex. Socket Bolt 4 M10x1.5xL20-10.9T
123 A061-0056 Shut-off Valve 1
124 A016-0001D001 Heli-Coil 8
125 A021-0001 Lock Pin 1

-9-
EHB20-Rev0/100625

EHB20 – Valve Ass’y

206

207

203

205
201

204

202

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B251-9802 Valve Ass’y 1


201 B250-2001 Valve 1
202 B250-2002 Valve Bush 1
203 B251-2001 Valve Plug 1
204 S8000651 O-ring 1 [K5]
205 S8000491 O-ring 1 [K5]
206 A053-0085D032 Static Seal 1 [K5]
207 A052-0023 Protect Ring 1

- 10 -
EHB20-Rev0/100625

EHB20 – Cylinder Bush Ass’y

304

302

304

301 302

303
303
304

303
303

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B200-9803 Cylinder Bush Ass’y 1


301 B200-1002 Cylinder Bush 1
302 A057-0018 Gas Seal 1 [K3]
303 A056-0044 Step Seal 2 [K3]
303-1 -Seal Ring -1 [K3] [D]
303-2 -O-ring -1 [K3] [D]
304 S8011601 O-ring 2 [K3]

- 11 -
EHB20-Rev0/100625

EHB20 – Back Head Ass’y

401

405 403 405


404 404 402

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B202-9804 Back Head Ass’y 1


401 B202-4001 Back Head 1
402 S8011601 O-ring 1 [K5]
403 A062-0041 Minimess Coupling 1 BSP 1/4
404 2181-1890D003 Plug 2 BSP 3/8
405 S8000141 O-ring 2 [K5]

- 12 -
EHB20-Rev0/100625

EHB20 – Front Head Ass’y


508 512
514
509
509 513
508
505 510

511

502
503

504
507
501
506

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B202-9805 Front Head Ass’y 1


501 B202-5001 Front Head 1
502 B202-5002 Thrust Ring 1
503 B200-5003 Chisel Bush 1
504 AB202-5001 Front Bush 1
505 B200-5007 Chisel Pin 2
506 B200-5006 Stop Pin 5
507 A031-0003 PU-Sleeve 5
508 A061-0034 Plug 3 BSP 1/4
509 S8000111 O-ring 4 [K5]
510 S8000121 O-ring 1 [K5]
511 A021-0001 Lock Pin 1
512 A061-0046 Plug 1 BSP 1/4
513 A083-1066 O-ring 1 [K5]
514 S6710051 Grease Nipple 1 BSPT 1/4

- 13 -
EHB20-Rev0/100625

EHB20 – Accumulator Ass’y

701 709
711 708
712
704
707

706

710

703

705 702

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B200-9902 Accumulator Ass’y 1


701 B200-3001 Accumulator Body 1
702 B200-3002 Accumulator Cover 1
703 B200-3003 Diaphragm 1
704 A082-0060 Acc. Charging Valve 1
705 A011-0005 Hex. Socket Bolt 12
706 S8000151 O-ring 1 [K5]
707 S8000051 O-ring 1 [K5]
708 S8000701 O-ring 1 [K5]
709 A052-0007 Back-up Ring 1 [K5]
710 A061-0035 Plug 1
711 A061-0049 Cap 1
712 S8000201 O-ring 1 [K5]

- 14 -
EHB20-Rev0/100625

EHB20 – Swivel Joint

3
8
9

8
3
4
6
5

ITEM PART NO. PART NAME QTY S/N REMARKS

+ A062-9002 Swivel Joint 1


1 A062-0075 Swivel Body 1
2 A062-0077 Swivel Rotator 1
3 A015-0010 Washer 2
4 S6500380 Snap Ring 1
5 A061-0034 Plug 1 BSP 1/4
6 S8000111 O-ring 1 [K4]
7 A051-2192 O-ring 1 [K4]
8 S8000401 O-ring 2 [K4]
9 A056-0059 Rotary Seal 2 [K4]
9-1 -Seal Ring -1 [K4] [D]
9-2 -O-ring -1 [K4] [D]

- 15 -
EHB20-Rev0/100625

EHB20 – Seal Kit


ITEM PART NO. PART NAME QTY S/N REMARKS

K1 AB202-0025 Seal Kit 1 [K2+K3+K4+K5]


K2 AB202-0026 Piston Lower Part Seal Kit 1
A053-0054 -Buffer Ring -1
A053-0055 -U-Packing -1
A054-0036 -Dust Seal -1

K3 AB202-0027 Piston Upper Part Seal Kit 1


A057-0018 -Gas Seal -1
A056-0044 -Step Seal -2
S8011601 -O-ring -2 JIS G160-HsA90

K4 AA062-0003 Swivel Joint Seal Kit 2


S8000111 -O-ring -1 JIS P11-HsA90
A051-2192 -O-ring -1 AS568-219- HsA90
S8000401 -O-ring -2 JIS P40-HsA90
A056-0059 -Rotary Seal -2

K5 AB202-0028 Normal Seal Kit 1


S8000051 -O-ring -1 JIS P5-HsA90
S8000111 -O-ring -12 JIS P11-HsA90
S8000121 -O-ring -1 JIS P12-HsA90
S8000141 -O-ring -5 JIS P14-HsA90
S8000151 -O-ring -1 JIS P15-HsA90
S8000181 -O-ring -3 JIS P18-HsA90
S8000201 -O-ring -1 JIS P20-HsA90
S8000241 -O-ring -2 JIS P24-HsA90
S8000291 -O-ring -1 JIS P29-HsA90
S8000301 -O-ring -1 JIS P30-HsA90
S8000491 -O-ring -1 JIS P49-HsA90
S8000651 -O-ring -1 JIS P65-HsA90
S8000701 -O-ring -1 JIS P70-HsA90
S8010251 -O-ring -2 JIS G25-HsA90
S8011601 -O-ring -1 JIS G160-HsA90
S8060181 -Back-up Ring -1 for JIS P18-HsA90, Bias-cut
S8090251 -Back-up Ring -1 for JIS G25-HsA90, Bias-cut
A052-0007 -Back-up Ring -1
A053-0085D024 -Static Seal -3
A083-1066 -O-ring -1 JIS S9-HsA90

- 16 -
EHB20-Rev0/100625

EHB20 – Tools (Chisels)

TOOL SHAPE

TYPE OF TOOL Moil Wedge Flat Wedge Moil Point Flat Wedge Flat End
(Pyramid) -Horizontal (Conical) - Vertical (Blunt)
(Cross-cut) (Inline-cut)

PART NO. B200-6002 B200-6004 B200-6005 B200-6006 B200-6007

TOOL DIAMETER mm 125 125 125 125 125


(in.) (4.92) (4.92) (4.92) (4.92) (4.92)
TOOL LENGTH mm 1150 1150 1150 1150 1050
(in.) (45) (45) (45) (45) (41)
TOOL WEIGHT kg 88 95 88 95 86
(lbs) (194) (209) (194) (209) (190)

- 17 -
EHB20-Rev0/100625

EHB20 – Bracket Ass’y; BA

28

1
A

20
18 14 27
17
22
23
8 21
11 25
A 24
26
21 15
9
10 19 POWER CELL
ASS'Y
16

5
7

13
12

- 18 -
EHB20-Rev0/100625

EHB20 – Bracket Ass’y; BA


ITEM PART NO. PART NAME QTY S/N REMARKS

+ AB202-0002 Bracket Ass’y 1


1 AB202-0024 Bracket 1
2 B200-7156 Lower Damper 1
3 B200-7155 Wear Plate (2) 2
4 B200-7154 Wear Plate (1) 2
5 B132-7077 Wear Plate (2) 3
6 B200-7041 Upper Damper 1
7 AB202-7023 Cover Plate 1
8 AB202-7022 Cover Plate 1
9 B250-7099 Cover Plate 1
10 S2221361 Hex. Socket Bolt 12
11 S5110911 Spring Washer 12 M20x2.5xL35-10.9T
12 A059-0013 Plug 4
13 A059-0017 Plug 13
14 B202-7027 P/C Supporter 1
15 A059-0010 Sealing Plug 1 M16x2.0xL35-10.9T
16 B220-7092 Sealing Plug 1
17 S0169861 Hex. Bolt 4
18 S5101111 Spring Washer 4
19 B132-7080 Sealing Plug (1) 1
20 B050-7055 Wear Plate (2) 1
21 S8000141 O-ring 2 JIS P14-HsA90
22 H002-0040D010 Reducer 1
23 S8000111 O-ring 1 JIS P11-HsA90
24 A062-9006 Swivel Joint 1
25 H002-0047D003 Elbow; Union 1
26 H002-0012D034 Adapter 1
27 H001-0016D254 Hose 1
28 B200-7110 Shim AR

- 19 -
EHB20-Rev0/100625

EHB20 – Mounting Adapter and Hoses

304 302
303
201
305
202
100
301

404
401 202
405 403
203
402
405

ITEM PART NO. PART NAME QTY S/N REMARKS

100 B250-7046 Mounting Adapter 1

200 B222-0614 Adapter Fasteners Set 1


201 S0180063 -Hex Head Bolt -12 M30x3.5xL130-10.9T
202 S5101513 -Spring Washer -24 M30(Type 1)
203 S4013543 -Hex. Nut -12 M30x3.5-10T

300 B220-9950D0 Mounting Pin Set 2


301 B220-9952Do -Bracket Pin -1
302 B220-9957Do -Spacer -2
303 B220-9956Do -Stop Ring -2
304 S0167161 -Hex. Head Bolt -1 M16x2.0xL170-10.9T
305 S4002942 -Hex. Nut -2 M16x2.0-10T

400 B222-0615 Hose Set 2


401 A061-0026D003 -Hose Plug -1 SEA ORFS #16
402 H001-0001D085 -Hose -1 ORFS #16-L2300-P350
403 A062-0053 -Adapter -1 ORFS #16-BSP1
404 S8000291 -O-ring -1 JIS P29-HsA90
405 A051-0212 -O-ring -2 AS568-021-HsA90

- 20 -
EHB20-Rev0/100625

EHB20 – Gas Charging Kit

4
5
1 6
3
9 9
2 8 7
4 3
7
3

ACCUMULATOR GAS CHARGING BACKHEAD GAS CHARGING

ITEM PART NO. PART NAME QTY S/N REMARKS

+ A090-0054 Gas Charging Kit 1 Excl. item 9


1 A092-0005 Pressure Regulator 1 KS B4603
2 A062-0043 Adapter 1
3 A062-0041 Minimess Coupling 3 BSP 1/4
4 A082-0016 Exhaust Valve 2 BSPT 1/8
5 A012-0002 Cap Nut 1 KS B6214, W23-14
6 A062-0018 Coupling 1 KS B6214
7 A075-0028 Hose 1 S12.65x1.5-L1000(5800psi)
8 A062-0052 Adapter 1

9 A090-0007 Nitrogen Gas Bottle 1 [S]

- 21 -
EHB20-Rev0/100625

EHB20 – Maintenance Tool Kit

3, 4, 5, 6
1, 2 7, 8, 9 10 11, 12, 13, 14

15, 16, 17 21, 22, 23, 24


18, 19, 20 25, 26, 27, 28 29, 30 31, 32

33, 34 35 36 37

38, 39, 40, 41 42 43, 44

- 22 -
EHB20-Rev0/100625

EHB20 – Maintenance Tool Kit


Standard Tool Kit Option Tool Kit
ITEM PART NO. PART NAME
BA BA
AB252-0006 Tool Kit 
AB252-0007 Tool Kit 
2 2199-9004 Tool Box 1 1
4 T6550007 L-Wrench 6 1 1
5 T6550009 L-Wrench 8 1 1
6 T6550011 L-Wrench 10 1
7 T6550013 L-Wrench 12 1
8 T6550015 L-Wrench 14 1
9 T6550018 L-Wrench 17 1
10 T7050003 Screw Driver(─) 1 1
12 T6510075 Spanner 19x22 1
15 T6510022 Spanner 30 1 1
18 T6510028 Spanner 46 1 1
22 A090-0059 Ring Wrench 46 1 1
26 A090-0027 Ring Wrench 65 1 1
30 T6640009 T-Wrench 14 1
33 A090-0042 Stop-Pin Tool 20 1 1
35 T7260057 Hammer 1 1
36 2199-1005 Pipe 1
38 S3140031 Eye Bolt M12 1
40 S3140051 Eye Bolt M20 2
41 S3140071 Eye Bolt M30 1
42 2199-9008 Grease Gun 1 1

- 23 -
Notes
Notes
EVERDIGM Corp.
Sales Office: Room #1203, Woolim Lion's Valley Ⅱ, 680,
Gasan-Dong, Geumcheon-Gu, Seoul, Korea 153-803
Tel: +82-2-801-0800 / Fax: +82-2-801-0899

Head Office: 332-3, Janggwan-ri, Jincheon-eub, Jincheon-gun,


& Factory Chungcheongbuk-do, Korea 365-802
Tel: +82-43-530-3300 / Fax: +82-43-530-3318

www.everdigm.com

You might also like