Professional Documents
Culture Documents
Wheel Information
All rim types covered in this catalogue can be made into wheels.
Contact Customer Service on 1300 791 672 for additional details.
Information Required:
Operating Conditions
Maximum load, inflation pressure, speed, tyre size and ply rating.
Design Details
Bolt circle diameter, number of holes, bolt hole configuration (straight or countersink), hole diameter, bore size, disc thickness, disc
location (offset), hub drawing (when available).
Formed Disc
MAKE SURE PARTS ARE OF CORRECT SIZE AND TYPE BEFORE ASSEMBLY BY CHECKING THE PART NUMBER
AND/OR DESCRIPTION ON ALL THE RIM COMPONENTS.
1. Rim Diameter
(Nom. Bead Seat Dia.)
2. Rim Width
3. Rim Inside Dia.
4. Bead Seat Area
5. Flange
6. Flange Height
7. Valve Hole (Location and size can vary)
1. Rim Diameter
(Nom. Bead Seat Dia.)
2. Rim Width
3. Rim Inside Dia.
4. Bead Seat Area
5. Flange-Fixed
6. Flange Height
7. Valve Hole
(Location and size can vary)
8. Flange-Removable
(Side Ring)
9. Lock Ring
10. O-Ring
(For tubeless application only)
11. 28° Mounting Bevel
(Utilized for demountable application only)
12. Rim Stop Plate
(Used for demountable application only; size,
shape and location can vary)
13. O-Ring Groove
14. Lock Ring Groove
15. Gutter portion of rim
1. Rim Diameter
(Bead Seat Dia.)
2. Rim Width
3. Rim Inside Dia.
4. Back Section Portion of Rim Base
5. Center Band Portion of Rim Base
6. Gutter Section Portion of Rim Base
7. Rim Base
(EnTyre Shaded Area)
8. Bead Seat Band
(Removable, Gutter Side only)
9. Lock Ring
10. O-Ring
11. Flange, Inner (Removable)
12. Flange, Outer (Removable)
* Note: Inner and Outer Flanges are identical
13. 28° Mounting Bevel
(Utilized for demountable application only)
14. Valve Hole
(Location, size and configuration can vary)
15. Knurl
(Located on Back Flange Section Portion of Rim
Base and Bead Seat Band tyre mating surfaces)
16. O-Ring Groove
17. Lock Ring Groove
(size and shape can vary depending on style of lock ring)
18. Pry Bar Pocket
(continuous gap entire circumference on some items)
DIMENSIONS RIM
RIM SIZE
PART NUMBER RECOMMENDED TYRE SIZE(S) (MM) WEIGHT
DIA. - WIDTH / FLANGE HT.
A B C D (KGS)
Above rim bases are available with various valve hole options and locations
Type TG/TGD
10.00-24
12.00-24
TA00082 24-8.00 / 1.4 37
13.00-24 (14 PR MAX.)
14.00-24 (14 PR MAX.)
13.00-24
300-990-262 24-10.00 / 1.7 14.00-24 64
16.00-24
TG - Identifies a Tubeless Grader rim design for use with only grader tyres.
Demountable rims are identified with a D in the rim base part number.
Add “F” to Part Number for flatbase rim.
Various valve hole options are available, including tapped holes.
ASS’Y
RIM SIZE
PART NUMBER RECOMMENDED TYRE SIZE(S) WEIGHT
DIA. - WIDTH / FLANGE HT.
(KGS)
20-10.00 / 1.7 254 514.4 43.2 473.5 153.2 51.6 450.9 18.3
25-10.00 / 1.5 254 635 38.1 594.2 153.2 51.6 571.5 18.3
25-12.00 / 1.3 304.8 635 33 594.2 175 48.2 571.5 18.3
25-14.00 / 1.5 355.6 635 38.1 594.2 204 51.6 571.5 18.3
25-17.00 / 1.7 431.8 635 43.2 594.2 242.1 51.6 571.5 18.3
66 X 44.00 - 25
TBA 25-36.00 / 1.5 141.9
66 X 43.00 - 25
25-30.00 / 1.5 762 635 38.1 593.9 407.2 51.6 571.5 18.3
25-36.00 / 1.5 914.4 635 38.1 593.9 483.4 51.6 571.5 18.3
32-27.00 / 1.7 685.8 817.6 43.2 750.6 369.1 51.6 752.6 18.3
32-31.00 / 1.7 787.4 817.6 43.2 750.6 419.9 51.6 752.6 18.3
32-36.00 / 1.7 914.4 817.6 43.2 750.6 483.4 51.6 752.6 18.3
25-19.5 / 2.5 495.3 635 63.5 593.9 296.8 51.6 546.1 29.9
25-22.00 / 3.0 558.8 635 76.2 593.9 328.6 51.6 546.1 26.9
Above rim bases are available with various valve hole options.
25-11.25 / 2.0 285.8 635 50.8 574.7 185.7 82.7 546.1 26.9
25-13.00 / 2.5 330.2 635 63.5 574.7 211.1 82.7 546.1 26.9
STN - Identifies a rim base without a bead seat band to rim base driving arrangement.
STND - Identifies a rim base with a notched gutter driving arrangement to prevent circumferential movement
of the components.
Demountable rims are identified with a D in the rim base part number.
Various valve hole options are available, including tapped holes.
25-17.00 / 2.0 432 635 50.8 574.7 261.9 82.7 546.1 26.9
25-19.50 / 2.5 495.3 635 63.5 574.7 296.8 82.7 546.1 26.9
25-22.00 / 3.0 558.8 635 76.2 574.7 328.6 82.7 546.1 26.9
25-25.00 / 3.5 635 635 88.9 574.7 363.5 82.7 546.1 26.9
HTG - Identifies a rim base without a bead seat band to rim base driving arrangement.
HTN - Identifies a rim base with a notched gutter driving arrangement to prevent circumferential movement
of the components.
HTM - Identifies a rim base with an outboard driving arrangement.
Various valve hole options are available, including tapped holes.
29-25.00 / 3.5 635 736.6 88.9 676.3 363.5 90.6 631.8 35.1
33-13.00 / 2.5 330.2 838.2 63.5 777.9 205.6 90.6 733.4 35.1
33-28.00 / 3.5 711.2 838.2 88.9 777.9 404.8 90.6 733.4 35.1
33-28.00 / 4.0 711.2 838.2 101.6 777.9 404.8 90.6 733.4 35.1
35-15.00 / 3.0 381 889 76.2 828.7 236.5 90.6 784.2 35.1
35-17.00 / 3.5 431.8 889 88.9 828.7 261.9 90.6 784.2 35.1
M identifies an outboard driving arrangement which prevents circumferential movement of the components.
G indicates the absence of a bead seat to rim base driving arrangement.
Various valve hole options, including tapped holes are available.
33-28.00 / 3.5 711.2 838.2 88.9 777.9 411.1 N/A 709.6 46.7
33-28.00 / 4.0 711.2 838.2 101.6 777.9 411.1 N/A 709.6 46.7
39-32.00 / 4.0 812.8 990.6 101.6 930.3 464.3 N/A 862 46.7
39-32.00 / 4.5 812.8 990.6 114.3 930.3 464.3 N/A 862 46.7
45-36.00 / 4.5 914.4 1143 114.3 1082.7 515.1 N/A 1014.4 46.7
HTE - Identifies the Heavy duty gutter with machined o-ring and lock ring grooves. The lock ring grooves are also shot-peened to
obtain maximum fatigue life.
L and M identify an outboard driving arrangement which prevents circumferential movement of the components.
Various valve hole options, including tapped holes are available.
33-13.00 / 2.5 330.2 838.2 63.5 777.9 205.6 90.6 733.4 35.1
35-15.00 / 3.0 381 889 76.2 828.7 236.5 90.6 784.2 35.1
35-17.00 / 3.5 431.8 889 88.9 828.7 261.9 90.6 784.2 35.1
49-17.00 / 3.5 431.8 1244.6 88.9 1184.3 269.5 90.6 1139.8 35.1
49-19.50 / 4.0 495.3 1244.6 101.6 1184.3 304.8 90.6 1139.8 35.1
RWH - Identifies a machined gutter with low stress W style lock ring design and the Reinforced back section and bead seat band. The
reinforced back and bead seat also offers a continuous lip for the tyre removal tools, eliminating pry bar pockets. The lock ring grooves
are also shot-peened to obtain maximum fatigue life.
G - Indicates the absence of a bead seat band to rim base driving arrangement.
Demountable rims are identified with a D in the rim base part number.
Various valve hole options are available, including tapped holes.
35-15.00 / 3.0 381 889 76.2 828.7 245.1 104.8 769.9 45.2
35-17.00 / 3.5 431.8 889 88.9 828.7 269 104.8 769.9 45.2
49-17.00 / 3.5 431.8 1244.6 88.9 1184.3 269.5 104.8 1119.2 45.2
49-19.50 / 4.0 495.3 1244.6 101.6 1184.3 304.8 104.8 1119.2 45.2
49-19.50 / 4.0 (RWEG) 495.3 1244.6 101.6 1184.3 304.8 N/A 1116.2 46.7
MRWE - Identifies a special Machined gutter with low stress W style lock ring design and the Reinforced back section. The lock ring
groove is also shot-peened for maximum fatigue life.
G - Indicates the absence of a bead seat band to rim base driving arrangement.
Demountable rims are identified with a D in the rim base part number.
Various valve hole options are available, including tapped holes.
EHD - Extra Heavy Duty design with the valve hole located on rim centerline. Other valve hole options, including tapped
holes are available.
Demountable rim base is identified with the second D in the rim base part number.
L in the rim base and bead seat part number identifies an outboard driving arrangement which prevents circumferential
movement of the components.
The XT DESIGN is similar to Type EHD, but with extra capacity for maximum life in extreme applications.
Various valve hole options are available, including tapped holes.
63 x 63 / 5.0 914.4 1600.2 127 1498.6 527.8 199.6 1430.3 58.7 N/A
1041.4 1600.2 127 1498.6 654.8 728.2 1430.3 58.7 594.6
63 x 41 / 5.0 1041.4 1600.2 127 1498.6 654.8 385.3 1430.3 58.7 242.1
1041.4 1600.2 127 1498.6 654.8 199.6 1430.3 58.7 N/A
The XT DESIGN is similar to Type EHD, but with extra capacity for maximum life in extreme applications.
Various valve hole options are available, including tapped holes.
DIMENSIONS (MM)
RIM SIZE
DIA. - WIDTH /
FLANGE HT. A B C D E F G H
551--002--001 24.00-51 OVM/3,6 33.00R-51 609.6 1295.4 127 412.5 47 1579 Rim Assy.
1850 Cat 785
557--012--001 29.00-57 SVM/1,2,4,5 37.00R-57 736.6 1447.8 152.4 476.5 47 1774 Rim Assy.
40.00R-57 2080 Cat 789
46/90R-57
557--002--001 29.00-57 OVM/3,6 37.00R-57 736.6 1447.8 152.4 476.5 47 1952 Rim Assy.
40.00R-57 2320 Cat 789
46/90R-57
32576PC793 32.00-57 SVM/1,2,4,5 40.00R-57 812.8 1447.8 152.4 514.5 47 1826 Rim Assy.
44/80R-57 2000 Cat 793
50/80R-57
50/90R-57
46/90R-57
557--002--005 32.00-57 OVM/3,6 40.00R-57 812.8 1447.8 152.4 514.5 47 2002 Rim Assy.
44/80R-57 2198 Cat 793
50/80R-57
50/90R-57
46/90R-57
863--012-001 36.00-63 SVM/1,2,4,5 53/80R-63 914.4 1600.2 127 592 58 2250 Rim Assy.
2455 Komatsu 930
563--002--001 36.00-63 OVM/3,6 53/80R-63 914.4 1600.2 127 596 58 2837 Rim Assy.
3340 Komatsu 930
41.00-63 SVM/1,2,4,5 55/80R-63 1041.4 1600.2 127 657.5 58 2680 Rim Assy.
41.00-63 OVM/3,6 55/80R-63 1041.4 1600.2 127 657.5 46 2874 Rim Assy.
563-990-002 44.00-63 SVM/1,2,4,5 59/80R-63 1104.4 1600.2 127 695.5 58 2752 Rim Assy.
2850 Cat 797
563-990-001 44.00-63 OVM/3,6 59/80R-63 1104.4 1600.2 127 695.5 46 2929 Rim Assy.
3077 Cat 797
XT Side Flange
Type RTG/RTL
Type XT/SVM/OVM
HTL HTM
HT91 STN
Type DR31E
Type FK-1
Type FK-7
Side Rings
SR24/8 VA/TGD SR 25"/3.5 SR 49"/3.5
SR 24/10.00 VA TGD SR 29"/3.0 SR 49"/4.0
SR 24/10.00 SW SR 29"/3.5 SR 51"/4.5
SR 24"/2.0WI SR 33"/2.5 SR 51"/4.5 (manufactured by TWA)
SR 25"/1.3 3pce SR 33"/3.5 SR 51"/5.0
SR 25"/1.5 3pce SR 33"/4.0 SR 51"/5.0 HDFM (manufactured by TWA)
SR25"/1.5 5pce (HSLA) SR 33"/4.5 SR 57"/5.0
SR 25"/1.7CR 3pce SR 35”/3.0 SR 57"/6.0
SR 25"/1.7 3pce SR 35"/3.5 SR 57"/6.0 HDFM (manufactured by TWA)
SR 25"/2.0 SR 35"/4.0 SR 63"/5.0
SR 25"/2.5 SR 39"/4.0
SR 25"/3.0 SR 45"/4.5
TYRE SIZE MULTI PIECE IND WHEELS TYRE SIZE SPLITS - RIM SIZE
5.00-8 3.00-8 Single 5.00-8 3.00-8 Wheel
18x7-8 4.33-8 Single 3.00-8 Blank
4.33-8 Under Gutter
6.00-9 4.00-9 Wheel
6.00-9 4.00-9 Single 4.00-9 Blank
4.00-9 Under Gutter
6.50-10 5.00-10 Wheel
21x8-9 6.00-9 Single
5.00-10 Blank
6.50x10 5.00-10 Single 5.00-10 Duel Kit
23x9-10 6.50-10 Single
7.00-12 5.00-12 Wheel
7.00-12 5.00-12 Single 5.00-12 Blank
5.00-12 Outer/Split 5.00-12 Duel Kit
27x10-12 8.00-12 Single NUT, BOLT, WASHER
7.00-15 5.50-15 Single
5.50-15 Dual 8" Rim = M10 x 25
5.50-15 Special Dual 9" & 10" Rims = M12 x 25
7.50-15 6.00-15 Single
6.00-15 Dual 12" Rims M16 x 35
6.00-15 Special Dual M12 countersunk screw
7.50-15 6.50-15 Single
8.25-15 6.50-15 Dual
6.50-15 Special dual
250-15 7.00-15 Single
8.25-15 or 28x9-15 7.00-15 Special Dual
250-15 7.50-15 Single
315/70-15 8.00-15 Single
32/12.1-15 9.75-15 Single
7.50-16 5.50-16 Single
5.50-16 Dual
8.25-16 6.00-16 Single
6.00-16 Dual
9.00-20 6.50-20 Single
6.50-20 Dual
6.50-20 Special Dual
9.00-20 7.00-20 Single
7.00-20 Dual
7.00-20 Special Dual
10.00-20 7.50-20 Single
7.50-20 Dual
7.50-20 Special Dual
12.00-20 8.00-20 Single
8.00-20 Dual
8.00-20 Special Dual
12.00-20 8.50V-20 Single
8.50V-20 Dual
8.50V-20 Special Dual
11.00/12.00-20 9.00-20 WI Single
9.00-20 WI Std Dual
9.00-20 WI Special Dual
14/80-20, 14.00-20 10.00-20 WI Single
10.00-20 WI Std Dual
10.00-20 WI Special Dual
10.00-20 4pce SW
14.00-20 10.00-20 VA Single
10.00-20 VA Standard Dual
10.00-20 VA Special Dual
IT/Loaders/Dump Trucks
63” Wheel & Rim product warranty is by negotiation and product/site requirement.
Standard 51” & 57” Wheel products have a 10,000 hr warranty period.
XT (51” & 57”) Heavy Duty wheel products have a 15,000 hr warranty period.
OVM / SVM (51 & 57”) Wheel products have a 30,000 hr warranty period, with 15,000 hr crack test interval period.
Standard 51” & 57” Demountable Rim products have a 5000 hr warranty period.
XT (51” & 57”) Heavy Duty Demountables have a 10,000 hr warranty period.
Notes: Komatsu 785-3, 4 or 5 demountables use 19.5x49 rim with a 1.38" gutter section.