Professional Documents
Culture Documents
R-725
-
-
-
Bored piles with or without drilling fluid;
Casing with rotary head or by the use of an oscillator;
C.F.A. (Continous Flight Auger) piles;
SOILMEC JAPAN CO LTD - Japan
- R.C. (Reverse Circulation) piles.
SOILMEC S.P.A. - Beijing Repr. Office - P.R. China
SOILMEC FAR EAST PTE.LTD - Singapore The main features of R-725 are the following:
SOILMEC EMIRATES - U.A.E. - Machine class: 80 ton;
SOILMEC GULF - U.A.E. - Completely self-erecting mast withstand the max torque over the whole length;
- Casing can be installed by means of a rotary head;
- Long stroke pull down by winch;
- Advanced instrumentation;
- Reliability and safety;
CERTIFIED QUALITY SYSTEM - SOILMEC electronic monitoring system on 10” touch screen for monitoring and control of the operating
parameters. Memo-block for acquisition of data and software for processing them on PC station. On request
data transfer via GSM/GPRS with “calling on trouble” option.
In 1990 Soilmec was awarded with the certification of its
Large diameter bored pile
Quality System complying with ISO 9001:2000 standards. Max pile diameter mm 2000
Max cased diameter mm 2000
Max pile depth m 76
Max cased depth m According to soil conditions and pile diameter
Casing max height m See kelly bar chart
Continuous Flight Auger (CFA)
Max pile diameter mm 1200
Max pile depth m 24 (16+8)
Extraction pull kN 800
Crowd force kN 320
SOILMEC S.p.A.
Ground Engineering Equipment
5819, via Dismano
47023 Cesena (FC) - Italy
tel. +39-0547-319111
fax +39-0547-318548
http:// www.soilmec.it
e-mail: soilmec@soilmec.it
-
-
-
Bored piles with or without drilling fluid;
Casing with rotary head or by the use of an oscillator;
C.F.A. (Continous Flight Auger) piles;
SOILMEC JAPAN CO LTD - Japan
- R.C. (Reverse Circulation) piles.
SOILMEC S.P.A. - Beijing Repr. Office - P.R. China
SOILMEC FAR EAST PTE.LTD - Singapore The main features of R-725 are the following:
SOILMEC EMIRATES - U.A.E. - Machine class: 80 ton;
SOILMEC GULF - U.A.E. - Completely self-erecting mast withstand the max torque over the whole length;
- Casing can be installed by means of a rotary head;
- Long stroke pull down by winch;
- Advanced instrumentation;
- Reliability and safety;
CERTIFIED QUALITY SYSTEM - SOILMEC electronic monitoring system on 10” touch screen for monitoring and control of the operating
parameters. Memo-block for acquisition of data and software for processing them on PC station. On request
data transfer via GSM/GPRS with “calling on trouble” option.
In 1990 Soilmec was awarded with the certification of its
Large diameter bored pile
Quality System complying with ISO 9001:2000 standards. Max pile diameter mm 2000
Max cased diameter mm 2000
Max pile depth m 76
Max cased depth m According to soil conditions and pile diameter
Casing max height m See kelly bar chart
Continuous Flight Auger (CFA)
Max pile diameter mm 1200
Max pile depth m 24 (16+8)
Extraction pull kN 800
Crowd force kN 320
SOILMEC S.p.A.
Ground Engineering Equipment
5819, via Dismano
47023 Cesena (FC) - Italy
tel. +39-0547-319111
fax +39-0547-318548
http:// www.soilmec.it
e-mail: soilmec@soilmec.it
Technical data Undercarriage 1 - Undercarriage with expandable tracks, Working Condition Working Condition
telescopic co-axial.
Overall length mm 5690
7
Track shoe width mm 900 2 - Self-lifting counterweight.
Overall width (extended side frames) mm 4700
Overall width (retracted side frames) mm 3180
Ground pressure MPa 0,095 3 - Hydraulic power pack powered by
BF6M1015CP diesel engine complete with
soundproof canopy and mounted on the
8000
Diesel engine (1) 1183
11435
Main winch Controlled descent
6 - Self erecting mast, which is designed 10
1st layer nominal line pull kN 240 to allow the max. torque along its complete
28194
1st layer nominal rope speed m/min 50/80 length. It is composed of a lower section,
4x10,5 m
23615
Rope diameter mm 30 14,5 m long intermediate element and
23237
16300 (Rotary Stroke)
2 m top extension. 9
Service winch Controlled descent Free fall
SW140 SF140
1st layer nominal line pull kN 140 140 7 - Sheave cathead.
17816
17635
1st layer nominal rope speed m/min 90 90
Rope diameter mm 26 26 8 - Crowd winch with 16.3 m stroke and
320 kN push pull force.
Rotary table
Maximum torque kNm 240 @ 9,2 rpm 9 - Rotary head with spin off speed.
Max spin off speed rpm 136
H
3000
Maximum drilling speed rpm 38 10 - Telescopic kelly complete with top guide. 5
Max crowd push / pull force kN 320 on casing Mechanical locking or friction type is
Max pull force on kelly kN 100 available.
Rotary stroke mm 16300
3398
3398
3319
3319
2
11 - Mechanical and hydraulic pre-
1294
Weights and dimensions
arrangement for casing oscillator. 900
1100
Operating weigth ton 80 1100 5690
355
900 4700
4600 4559
Transport width mm 3180 4600 4559 4700
Transport height w/o kelly bar mm 3530 MAX DEPTH W/O CLEANER: 16m + 8m
3717
4x 10,5 37,0 5,7 8,9 4x 10,5 37,0 5,8 8,9 3000
3530
1000 ±100
4x 15,5 57,9 8,0 3,7 4x 15,5 57,8 8,2 3,7
1334
4x 16,5 62,0 8,5 2,6 4x 16,5 62,0 8,7 2,6
1150 +350
-250
968
11
5x 10,5 46,2 5,5 8,9 900
3180
630
4650 1500 10860
5x 13,5 61,9 6,9 5,7 700 7900 8000 (Closed 6000)
1310 1310 1310 1310 840
7190
5x 15,5 72,2 7,9 3,7
Standard dimension of tool connection is 150 x 150 mm 23090
5x 16,5 77,4 6,4 2,6 H = Kelly stub height from ground level Detailed cathead
R-725 R-725 R-725 R-725
HYDRAULIC ROTARY RIG HYDRAULIC ROTARY RIG LARGE DIAMETER PILES CONTINUOUS FLIGHT AUGER
Technical data Undercarriage 1 - Undercarriage with expandable tracks, Working Condition Working Condition
telescopic co-axial.
Overall length mm 5690
7
Track shoe width mm 900 2 - Self-lifting counterweight.
Overall width (extended side frames) mm 4700
Overall width (retracted side frames) mm 3180
Ground pressure MPa 0,095 3 - Hydraulic power pack powered by
BF6M1015CP diesel engine complete with
soundproof canopy and mounted on the
8000
Diesel engine (1) 1183
11435
Main winch Controlled descent
6 - Self erecting mast, which is designed 10
1st layer nominal line pull kN 240 to allow the max. torque along its complete
28194
1st layer nominal rope speed m/min 50/80 length. It is composed of a lower section,
4x10,5 m
23615
Rope diameter mm 30 14,5 m long intermediate element and
23237
16300 (Rotary Stroke)
2 m top extension. 9
Service winch Controlled descent Free fall
SW140 SF140
1st layer nominal line pull kN 140 140 7 - Sheave cathead.
17816
17635
1st layer nominal rope speed m/min 90 90
Rope diameter mm 26 26 8 - Crowd winch with 16.3 m stroke and
320 kN push pull force.
Rotary table
Maximum torque kNm 240 @ 9,2 rpm 9 - Rotary head with spin off speed.
Max spin off speed rpm 136
H
3000
Maximum drilling speed rpm 38 10 - Telescopic kelly complete with top guide. 5
Max crowd push / pull force kN 320 on casing Mechanical locking or friction type is
Max pull force on kelly kN 100 available.
Rotary stroke mm 16300
3398
3398
3319
3319
2
11 - Mechanical and hydraulic pre-
1294
Weights and dimensions
arrangement for casing oscillator. 900
1100
Operating weigth ton 80 1100 5690
355
900 4700
4600 4559
Transport width mm 3180 4600 4559 4700
Transport height w/o kelly bar mm 3530 MAX DEPTH W/O CLEANER: 16m + 8m
3717
4x 10,5 37,0 5,7 8,9 4x 10,5 37,0 5,8 8,9 3000
3530
1000 ±100
4x 15,5 57,9 8,0 3,7 4x 15,5 57,8 8,2 3,7
1334
4x 16,5 62,0 8,5 2,6 4x 16,5 62,0 8,7 2,6
1150 +350
-250
968
11
5x 10,5 46,2 5,5 8,9 900
3180
630
4650 1500 10860
5x 13,5 61,9 6,9 5,7 700 7900 8000 (Closed 6000)
1310 1310 1310 1310 840
7190
5x 15,5 72,2 7,9 3,7
Standard dimension of tool connection is 150 x 150 mm 23090
5x 16,5 77,4 6,4 2,6 H = Kelly stub height from ground level Detailed cathead
R-725 R-725 R-725 R-725
HYDRAULIC ROTARY RIG HYDRAULIC ROTARY RIG LARGE DIAMETER PILES CONTINUOUS FLIGHT AUGER
Technical data Undercarriage 1 - Undercarriage with expandable tracks, Working Condition Working Condition
telescopic co-axial.
Overall length mm 5690
7
Track shoe width mm 900 2 - Self-lifting counterweight.
Overall width (extended side frames) mm 4700
Overall width (retracted side frames) mm 3180
Ground pressure MPa 0,095 3 - Hydraulic power pack powered by
BF6M1015CP diesel engine complete with
soundproof canopy and mounted on the
8000
Diesel engine (1) 1183
11435
Main winch Controlled descent
6 - Self erecting mast, which is designed 10
1st layer nominal line pull kN 240 to allow the max. torque along its complete
28194
1st layer nominal rope speed m/min 50/80 length. It is composed of a lower section,
4x10,5 m
23615
Rope diameter mm 30 14,5 m long intermediate element and
23237
16300 (Rotary Stroke)
2 m top extension. 9
Service winch Controlled descent Free fall
SW140 SF140
1st layer nominal line pull kN 140 140 7 - Sheave cathead.
17816
17635
1st layer nominal rope speed m/min 90 90
Rope diameter mm 26 26 8 - Crowd winch with 16.3 m stroke and
320 kN push pull force.
Rotary table
Maximum torque kNm 240 @ 9,2 rpm 9 - Rotary head with spin off speed.
Max spin off speed rpm 136
H
3000
Maximum drilling speed rpm 38 10 - Telescopic kelly complete with top guide. 5
Max crowd push / pull force kN 320 on casing Mechanical locking or friction type is
Max pull force on kelly kN 100 available.
Rotary stroke mm 16300
3398
3398
3319
3319
2
11 - Mechanical and hydraulic pre-
1294
Weights and dimensions
arrangement for casing oscillator. 900
1100
Operating weigth ton 80 1100 5690
355
900 4700
4600 4559
Transport width mm 3180 4600 4559 4700
Transport height w/o kelly bar mm 3530 MAX DEPTH W/O CLEANER: 16m + 8m
3717
4x 10,5 37,0 5,7 8,9 4x 10,5 37,0 5,8 8,9 3000
3530
1000 ±100
4x 15,5 57,9 8,0 3,7 4x 15,5 57,8 8,2 3,7
1334
4x 16,5 62,0 8,5 2,6 4x 16,5 62,0 8,7 2,6
1150 +350
-250
968
11
5x 10,5 46,2 5,5 8,9 900
3180
630
4650 1500 10860
5x 13,5 61,9 6,9 5,7 700 7900 8000 (Closed 6000)
1310 1310 1310 1310 840
7190
5x 15,5 72,2 7,9 3,7
Standard dimension of tool connection is 150 x 150 mm 23090
5x 16,5 77,4 6,4 2,6 H = Kelly stub height from ground level Detailed cathead
R-725 R-725 R-725 R-725
HYDRAULIC ROTARY RIG HYDRAULIC ROTARY RIG LARGE DIAMETER PILES CONTINUOUS FLIGHT AUGER
Technical data Undercarriage 1 - Undercarriage with expandable tracks, Working Condition Working Condition
telescopic co-axial.
Overall length mm 5690
7
Track shoe width mm 900 2 - Self-lifting counterweight.
Overall width (extended side frames) mm 4700
Overall width (retracted side frames) mm 3180
Ground pressure MPa 0,095 3 - Hydraulic power pack powered by
BF6M1015CP diesel engine complete with
soundproof canopy and mounted on the
8000
Diesel engine (1) 1183
11435
Main winch Controlled descent
6 - Self erecting mast, which is designed 10
1st layer nominal line pull kN 240 to allow the max. torque along its complete
28194
1st layer nominal rope speed m/min 50/80 length. It is composed of a lower section,
4x10,5 m
23615
Rope diameter mm 30 14,5 m long intermediate element and
23237
16300 (Rotary Stroke)
2 m top extension. 9
Service winch Controlled descent Free fall
SW140 SF140
1st layer nominal line pull kN 140 140 7 - Sheave cathead.
17816
17635
1st layer nominal rope speed m/min 90 90
Rope diameter mm 26 26 8 - Crowd winch with 16.3 m stroke and
320 kN push pull force.
Rotary table
Maximum torque kNm 240 @ 9,2 rpm 9 - Rotary head with spin off speed.
Max spin off speed rpm 136
H
3000
Maximum drilling speed rpm 38 10 - Telescopic kelly complete with top guide. 5
Max crowd push / pull force kN 320 on casing Mechanical locking or friction type is
Max pull force on kelly kN 100 available.
Rotary stroke mm 16300
3398
3398
3319
3319
2
11 - Mechanical and hydraulic pre-
1294
Weights and dimensions
arrangement for casing oscillator. 900
1100
Operating weigth ton 80 1100 5690
355
900 4700
4600 4559
Transport width mm 3180 4600 4559 4700
Transport height w/o kelly bar mm 3530 MAX DEPTH W/O CLEANER: 16m + 8m
3717
4x 10,5 37,0 5,7 8,9 4x 10,5 37,0 5,8 8,9 3000
3530
1000 ±100
4x 15,5 57,9 8,0 3,7 4x 15,5 57,8 8,2 3,7
1334
4x 16,5 62,0 8,5 2,6 4x 16,5 62,0 8,7 2,6
1150 +350
-250
968
11
5x 10,5 46,2 5,5 8,9 900
3180
630
4650 1500 10860
5x 13,5 61,9 6,9 5,7 700 7900 8000 (Closed 6000)
1310 1310 1310 1310 840
7190
5x 15,5 72,2 7,9 3,7
Standard dimension of tool connection is 150 x 150 mm 23090
5x 16,5 77,4 6,4 2,6 H = Kelly stub height from ground level Detailed cathead
SOILMEC distributes machinery and structures all over
R-725
-
-
-
Bored piles with or without drilling fluid;
Casing with rotary head or by the use of an oscillator;
C.F.A. (Continous Flight Auger) piles;
SOILMEC JAPAN CO LTD - Japan
- R.C. (Reverse Circulation) piles.
SOILMEC S.P.A. - Beijing Repr. Office - P.R. China
SOILMEC FAR EAST PTE.LTD - Singapore The main features of R-725 are the following:
SOILMEC EMIRATES - U.A.E. - Machine class: 80 ton;
SOILMEC GULF - U.A.E. - Completely self-erecting mast withstand the max torque over the whole length;
- Casing can be installed by means of a rotary head;
- Long stroke pull down by winch;
- Advanced instrumentation;
- Reliability and safety;
CERTIFIED QUALITY SYSTEM - SOILMEC electronic monitoring system on 10” touch screen for monitoring and control of the operating
parameters. Memo-block for acquisition of data and software for processing them on PC station. On request
data transfer via GSM/GPRS with “calling on trouble” option.
In 1990 Soilmec was awarded with the certification of its
Large diameter bored pile
Quality System complying with ISO 9001:2000 standards. Max pile diameter mm 2000
Max cased diameter mm 2000
Max pile depth m 76
Max cased depth m According to soil conditions and pile diameter
Casing max height m See kelly bar chart
Continuous Flight Auger (CFA)
Max pile diameter mm 1200
Max pile depth m 24 (16+8)
Extraction pull kN 800
Crowd force kN 320
SOILMEC S.p.A.
Ground Engineering Equipment
5819, via Dismano
47023 Cesena (FC) - Italy
tel. +39-0547-319111
fax +39-0547-318548
http:// www.soilmec.it
e-mail: soilmec@soilmec.it
-
-
-
Bored piles with or without drilling fluid;
Casing with rotary head or by the use of an oscillator;
C.F.A. (Continous Flight Auger) piles;
SOILMEC JAPAN CO LTD - Japan
- R.C. (Reverse Circulation) piles.
SOILMEC S.P.A. - Beijing Repr. Office - P.R. China
SOILMEC FAR EAST PTE.LTD - Singapore The main features of R-725 are the following:
SOILMEC EMIRATES - U.A.E. - Machine class: 80 ton;
SOILMEC GULF - U.A.E. - Completely self-erecting mast withstand the max torque over the whole length;
- Casing can be installed by means of a rotary head;
- Long stroke pull down by winch;
- Advanced instrumentation;
- Reliability and safety;
CERTIFIED QUALITY SYSTEM - SOILMEC electronic monitoring system on 10” touch screen for monitoring and control of the operating
parameters. Memo-block for acquisition of data and software for processing them on PC station. On request
data transfer via GSM/GPRS with “calling on trouble” option.
In 1990 Soilmec was awarded with the certification of its
Large diameter bored pile
Quality System complying with ISO 9001:2000 standards. Max pile diameter mm 2000
Max cased diameter mm 2000
Max pile depth m 76
Max cased depth m According to soil conditions and pile diameter
Casing max height m See kelly bar chart
Continuous Flight Auger (CFA)
Max pile diameter mm 1200
Max pile depth m 24 (16+8)
Extraction pull kN 800
Crowd force kN 320
SOILMEC S.p.A.
Ground Engineering Equipment
5819, via Dismano
47023 Cesena (FC) - Italy
tel. +39-0547-319111
fax +39-0547-318548
http:// www.soilmec.it
e-mail: soilmec@soilmec.it