Professional Documents
Culture Documents
• Support many inputs analog (4 to 16 feeder lines), digital input data (up to 96 DI), digital
output data, control output (up to 18)Remote data acquisition
• Report the faults of distribution line
• Execution control command from the central system
IHM-6400 DTU can receive the control command from the central system to remotely operate the
distribution switch. In this way, IHM-6400 DTU can identify the faulty, re-configure the network,
recovery the power supply and reduce the power outage time as well as improve power supply
reliability of distribution network.
IHM-6400 DTU Distribution Terminal Unit
IHM-6400 is design in different capacity 4 Feeders lines, 6 Feeders lines, 8 Feeders lines and 12 Feeders lines .
IHM-6100 equipped with visual indication to support visual tracking and audit at field while
sending critical data, event and alarm to the Central system through RF network. IHM-6100
has been designed based on latest technology to be supplied from power line and
maintenance-free life during long life. Installation process of IHM-6100 is very simple and can
be done on hot line anywhere.
IHM-6100 Data Collector
(Data Collector for over-head FCI)
IHM-6100 Data Collector is the core element of fault locating system acting as
gateway between FCI and central system, IHM-6100 Data Collector using short-range
wireless and remote wireless hybrid network technology, makes the system with
channel monitoring, fault alarm and switching capability, support system diagnosis,
self-healing and communication interrupt recovery data after the continuous
transmission function.
Through the use of solar energy and maintenance free battery, the high reliable
power supply system ensures the system stable and reliable, utility company can
monitor the condition information and fault information of the line in real time.
IHM-6101 (Fault Circuit Indicator)+ Zero
Sequence
IHM-6101 (Fault Circuit Indicator) has been designed based on advanced technology for
underground cable to pinpoint fault location and accurately log load in any point along the
electric distribution power network (faults like two-phase or three-phase short-circuit
fault and single-phase earth fault)
IHM-6101 utilized low power RF/ Fiber optic network to communicate with Smart Data
Collector. IHM-6101 has been designed based on latest technology to be maintenance-free
life during long life. Installation process of IHM-6101 is very simple and can be done on hot
line anywhere..
IHM-6000 monitors transformer running state in real time (metering and monitoring the
transformer output power), meanwhile acting as Data Concentrator for gathering of
metering data from Smart Meters in subsidiary of transformer. It provides the data
necessary to conduct preventive maintenance and proper network planning, ultimately
improving the stability of the power supply.
• Increase Low Voltage power network visibility
• Power quality measurement like Harmonic, THD, power factor, unbalance in
current and voltage
• Abnormal events alerts for transformer and LV network
• High accuracy under all operational conditions: Class 0.5S
• Flexible input and output
• Open standardized protocol for metering and SCADA: DLMS/COSEM, RTU
MODBUS, DNP3.0, IEC 870-5-102 , GB 376.1, DL/T645
• Up to 32 odd harmonic and THD measurement
• Support OFDM, modulation for PLC communication to Smart meter, like PRIME, G3
or Support fixed or Mesh RF for communication to Smart meter
• Support GSM/GPRS/3G, DSL, Fiber Optic for communication to central system
• Supports up to 1200 Smart meters
• Street Light feeder monitoring and Controlling
IHM-6000 (All in one)
Transformer
temperature
Self-Healing DMS Communication Infrastructure
Center1 Center 2
Firewall
Web based connection Private Communication
UHF Antenna
FCI
FTU+ Circuit break Switch
DTU/RTU TTU
Center 3 Center n
Self-Healing DMS
Communication Advantage
• Security, UHF/VHF modem that using licensed frequency make sure
there is no interfere from other devices Private Communication network
• Reliability, UHF/VHF modem will provide reliable communication for
utility company and utility company can achieve goal of Control
system for reliable control UHF/VHF
• Operation cost, UHF/VHF solution doesn’t have operation cost and Antenna
with one-time investment utility company can use this media without
any other charge fee
• Private communication, UHF/VHF is private communication under UHF/VHF modem
control of utility company
TTU
FCI FTU+ Circuit break Switch
DTU/RTU
Self-Healing DMS Benefits
• Real-time monitoring, signaling and controlling of distribution power
network, which allows power network to be utilized in optimal state.
• Anticipation, which enables the system to automatically look for problems
that could trigger larger disturbances.
• Rapid isolation, which allows the system to isolate parts of the network that
experience failure from the rest of the system to avoid the spread of
disruption and enables a more rapid restoration.
• Reduce power outages and minimize their length when they do occur.
Index Normal time After implementation of DMS
Average response time on pinpoint a 2 hours less than 10 seconds
fault / outage
Average restoration of power 2-3 hours Less than 60 second
network
Average time spent on performing 2-3 hours 1 to 4 minutes
switching / isolation for planned
outages
Customer power cut due to outages 2 hours less than 20 seconds
Self-Healing DMS work Principal
Inhemeter’s self-healing solution ensures effective fault detection, isolation and cleaning in fast reaction
within the distribution network.
Self-healing DMS Benefits:
• Centralized monitoring & controlling all the substations and feeder lines
• Send the alarms & events(short circuit, earth fault, etc.) to DMS System
• Cost effective solution, fast and quick return of investment
• Reduce the outage duration and improve power supply reliability and power quality
• Implement self-healing power network, fault diagnosis and system can isolate faulty area
Self-Healing DMS Work principle
DTU
Close
Open
C.B FTU
Example of Self-healing power network
CLOSE
Isolating and reenergizing zone 4
1. Isolating zone 4
2. Zone 4 in now reenergized
CLOSE
Isolating
And
CLOSE
reenergizing
zone 3
Smart Prepayment
Metering Solution
for LPU Customers
LPU (Large Power Unit) customers are very important for utility company
because they are few but their consumption is very high, management of
these customers are critical for utility companies
Benefits of Smart Prepayment Metering for LPU users:
• ROI less than one year
• Improve Cash flow
• Cancelation of theft and meter manipulation
• Reduce Distribution System Losses;
• Increase Distribution Network Manageability and reliability;
• Reduce outage numbers and durations;
• Improve billing collection rate;
• Improve the quality of supplied electricity;
LPU Customer
System Architecture
MV Metering Unit
(BOX 11kV)
• Up to 11 kV direct connection
• Prepayment and post-payment
• Wired or RF CIU
• Plug & play communication module
• Tamper proof
• Combined CT , PT, Meter
• Open standardized protocol: DLMS/COSEM
• Local and remote firmware upgrade
• Multi tariff
• High Accuracy
• Remote Connect and disconnect with External Smart Switch (optional)
BOX 11kV
MV Metering Unit
(BOX 11kV)
• Up to 15 kA direct connection
• Prepayment and post-payment
• Wired or RF CIU
• Plug & play communication module
• Tamper proof
• Combined CT , PT, Meter
• Open standardized protocol: DLMS/COSEM
• Local and remote firmware upgrade
• Multi tariff
• High Accuracy
• Remote Connect and disconnect with External Smart Switch (optional)
BOX 11kV
MV Metering Unit
(BOX 22kV)
• Up to 22 kV direct connection
• Prepayment and post-payment
• Wired or RF CIU
• Plug & play communication module
• Tamper proof
• Combined CT , PT, Meter
• Open standardized protocol: DLMS/COSEM
• Local and remote firmware upgrade
• Multi tariff
• High Accuracy
• Remote Connect and disconnect with External Smart Switch (optional)
BOX 22kV
MV Metering Unit
(BOX 33kV)
• Up to 33 kV direct connection
• Prepayment and post-payment
• Wired or RF CIU
• Plug & play communication module
• Tamper proof
• Combined CT , PT, Meter
• Open standardized protocol: DLMS/COSEM
• Local and remote firmware upgrade
• Multi tariff
• High Accuracy
• Remote Connect and disconnect with
External Smart Switch (optional)
BOX 33kV
IHM-6300 FTU-Bell (Feeder Terminal Unit)
IHM-6300 FTU is designed based on advanced technology for management of T connection in MV feeders (10kV, 13kV, 20kV, 25kV, 35kV) to help utility company
for detection and isolation of fault in distribution network (FTU trip immediately to cut failure line and minimize outage effect).
1010101010101010101010101
Power up
10101010101010101010101010
•
• Last gasp
• Over voltage
Smart View (AMI) • Low voltage
• Current unbalance
• Phase failure
• Reverse Phase sequence
• Low power factor
• Door opened and closed
• Communication error
Multi-function Meter
APP/SMS
Data Collector DCGJ-1A
SmartMDM
Raw information without process is not valuable and useful for utility
company, for this reason MDM system is Critical part of Smart
Metering System. Utilities are facing several serious challenges which
can be solved or at least eliminated by analyzing grid/energy data and
detecting problematic points and then taking remedy actions. Among
all problems those utilities are continuously suffering from, following
items can be mentioned like Energy loss (technical and commercial),
Over-loading of transformers and lines, High peak time consumption,
Poor management of outages and assets, Poor, late or not detecting
and managing events and alarms.
Inhemeter MDM System (SmartMDM) is enterprise level system deals with
metered data. SmartMDM processes data items, analyzes them and
generates high level and meaningful reports and information to top
managers, utility engineers and all other types of users. SmartMDM
usually deals with data regardless how and when they are collected, so
either they are gathered by AMM (Automatic Meter Management) or
entered manually can be processed by SmartMDM. SmartMDM is
application-oriented system which is developed to produce meaningful
information to users.
Transformer Management Solution
Inhemeter’s Distribution Transformer Management System (DTMS) represents the next evolutionary step in the smart grid development. DTMS
empower Distribution Optimization and Distribution Automation which further modernizes the grid. DTMS is designed based on advanced digital
measurement technology to measure and monitor real time parameter and operating status of transformer, collect transformer data, analysis power
quality , outage management and alarm abnormal event, automatically and remotely through communication system (GSM/GPRS, Ethernet, PLC/RF,
etc.), DTMS provides utilities with access to critical distribution optimization information from within the heart of the grid to improve grid efficiencies
and pinpoint power theft/losses for remediation. DTMS provides modern management tools for utility company to protection transformer from
overloading, high temperature and also help utility to measure and compensate power quality parameters deviations like power factor and voltage.
DTMS benefits:
• Detection most of transformers on the brink of collapse (overloaded) and performed proactive upgrades and redistributed secondary
connections to alleviate overloading from Utility company
• Improve outage (because normally change of transformer need 12 hours) and also with feeder monitoring and Last Gasp (in some utility up to
100,000 outage minutes)
• Improve PM and Asset management process
• Better management of Street light and decreasing total consumption up to 40%
• Improving delivered electricity Quality like voltage, power factor, load unbalancing
• Distribution Planning, utility company can recognized which transformer is overload and can make plan for extension of power network
DTMS High light
• Identify and lower utility losses
• Lessen outages and analysis
• Allow for preventive maintenance
• Accelerate restoration of power
• Report event like abnormal voltages, load,
temperature, oil level, unbalance, power factor,
• Support smart switch to connection and
disconnection of transformer
• Power quality measurement, analysis and
compensation
• Data concentrator for Smart Metering purpose
• Support PLC or RF to communicate for Smart
Metering
• Adoptable for single phase and three phase
transformer
• Manage Street lighting feeder
DTM Solution
IHM-6000 (TTU) Smart
Transformer Terminal Unit
IHM-6000 monitors transformer running state in real time (metering and monitoring the
transformer output power), meanwhile acting as Data Concentrator for gathering of
metering Data from Smart Meters in subsidiary of transformer. It provides the data
necessary to conduct preventive maintenance and proper network planning, ultimately
improving the stability of the power supply.
• Increase Low Voltage power network visibility
• Power quality measurement like Harmonic, THD, power factor, unbalance in
Current and voltage
• Abnormal events alerts for transformer and LV network
• High accuracy under all operational conditions: Class 0.5S
• Flexible input and output
• Open standardized protocol for metering and SCADA: DLMS/COSEM, RTU
MODBUS, DNP3.0, IEC 870-5-102 , GB 376.1, DL/T645
• Up to 32 odd harmonic and THD measurement
• Support OFDM, modulation for PLC communication to Smart meter, like PRIME, G3
or support fixed or Mesh RF for communication to Smart meter
• Support GSM/GPRS/3G, DSL, Fiber Optic for communication to central system
• Supports up to 1200 Smart meters
• Street Light feeder monitoring and Controlling
Street light
(Segment Control)
High Quality Split CT
• Rated current 75A to 6000A
• Maximum voltage 750V
• Accuracy < 0.5
• Output current 5A or 1A
• Standard IEC/EN60044-1, GB 1208, IEEE C57.13
• Insulation class, Class E
• Safety insulation EN61010-1 CAT III 600V
• Type: Aluminum Electrolytic Capacitor, low voltage capacitor
• Capacitance: 20kvar, 40(20+20)
• Rated Voltage: 450V
• Compensation method: Three phase compensation
• Weight: 7Kg
• Working temperature: -25°C to +55°C
• Power consumption:<2W
Smart DMS System Central system is complete solution to monitor, control and manage Distribution power network includes medium/high Voltage feeder,
Distribution substation and high voltage substation, the system provides real time monitoring and intelligent control (monitoring critical parameters of
distribution power network, locates and reports faults, automatically isolates faulty area, restores non-faulty area, provides remote control and reconfiguration,
etc.) Smart DMS is GIS based and user friendly system for monitoring and controlling of distribution power network. Smart DMS receiving information and alerts
from IEDs from power network, make process and analysis on received data and create related report for utility company and send related intelligent controlling
to IEDs. Smart DMS provides Standard interface to existing like OMS, IVR, and EMS system.
Smart DMS Functions
• SCADA function includes Data acquisition and process, Monitoring, alarm and event log, control (operation and closure), Real-time, communicate with
FTU, DTU, TTU, FCI and other terminals through the optical fiber, 3G, GPRS or wireless private network, to realize the real-time data acquisition and
remote-control function.
• Distribution network condition monitoring and Accident analysis, recall and holographic inversion
• Human Interface Machine includes IEC61970 CIM /XML import and export, Gallery of integrated graphics interface, Device management and Authority
management
• Feeder line automation function, Adopt the integrated FA mode, online topology analysis and generate the recovery plan, terminal layer can be set
through the flexible working mode of master station, Fault isolation with peer-to-peer communication mode, it can be finished in a terminal layer,
recovery of fault in short time (so it can ensure that the substation circuit breaker, reconnect successful), reduce
FA (Feeder automation) function Based on the fault signals collected from FTU or fault indicator, determine the fault location and the
corresponding isolation and restoration scheme automatically in the real time.
Fault location: Determine the fault location based on the fault signals collected by the FTU or fault indicators, as well as the real-time
switch state and the topological model of the power network.
Fault isolation: Isolating the fault area from the distribution network through the remote control or manually
Fault restoration: Restoration of power supply in non-fault areas through the remote control or manually
• Outage time and Perfect fault simulation system (users can customize any FA simulation plans, including the point of failure, failure time, failure types,
the FTU action and various parameters, such as communication status of distribution network)
• WEB subsystem includes Graphics and curve query, Particulars relating to the real-time query and alarm, Real time data query and Equipment
parameters query
• Distribution comprehensive information exchange that comply with IEC61970/IEC61968 standard and convenient communication interface function
between different systems
• Information processing and management function Data processing, statistical calculation, information storage, distribution network fault information
display and processing, fault information inquiry, historical event query, history data query, real time data view report function and so on.
Fault Isolation
Feeder Reconfiguration
Smart DMS Functions