Professional Documents
Culture Documents
01. A cantilever of length L and depth 2h is in a state of plane stress. The cantilever is of unit
thickness, is rigidly supported at the end x = L, and is loaded as shown in Fig.01. Show
that the stress function
𝜑 = 𝐴𝑥 2 + 𝐵𝑥 2 𝑦 + 𝐶𝑦 3 + 𝐷(5𝑥 2 𝑦 3 − 𝑦5)
is valid for the beam and evaluate the constants A, B, C, and D.
(Total marks 20)
2
HNDE Civil/Mechanical 2 Mechanics of Solids 2017 2nd Semester
3
HNDE Civil/Mechanical 2 Mechanics of Solids 2017 2nd Semester
02. Show that the stress function
1 1 3 2
𝜑 = −𝐺𝜃 [ (𝑥 2 + 𝑦 2 ) − (𝑥 − 3𝑥𝑦 2 ) − 𝑎2 ]
2 2𝑎 27
is the correct solution for a bar having a cross-section in the form of the equilateral
triangle shown in Fig 02. Determine the shear stress distribution and the warping of the
cross-section. Find the position and magnitude of the maximum shear stress.
4
HNDE Civil/Mechanical 2 Mechanics of Solids 2017 2nd Semester
5
HNDE Civil/Mechanical 2 Mechanics of Solids 2017 2nd Semester
6
HNDE Civil/Mechanical 2 Mechanics of Solids 2017 2nd Semester
03. Prove that the slope of the elastic curve at the left support of the uniformly loaded beam
shown in Fig 03. is 7𝜔𝐿3
192 𝐸𝐼
7
HNDE Civil/Mechanical 2 Mechanics of Solids 2017 2nd Semester
04. A series spring assembly is shown in fig. 04. The force at node 3 is 1kN. The stiffness of
springs are 1kN/mm, 2kN/mm and 3kN/mm. Obtain
i. The Element stiffness matrices & the Global stiffness matrix
ii. The displacements of nodes 2 and 3
iii. The reaction forces at nodes 1 and 4 & the forces in each spring.
8
HNDE Civil/Mechanical 2 Mechanics of Solids 2017 2nd Semester
9
HNDE Civil/Mechanical 2 Mechanics of Solids 2017 2nd Semester
05. Determine the crippling load for a T – section of dimensions 12cm x 12cm x 2cm and of length
6m when it is used as strut with both of its end hinged. Young’s modulus E = 2 × 105 N/mm2
𝑎1 𝑦1 + 𝑎2 𝑦2
𝑦̅ =
𝑎1 + 𝑎2
12 × 23 2 × 103
𝐼𝑋𝑋 = + 24 × 2.72732 + + 20 × 3.27272
12 12
2 × 123 10 × 23
𝐼𝑌𝑌 = + = 288 + 6.667 = 294.667 𝑐𝑚4
12 12
10
HNDE Civil/Mechanical 2 Mechanics of Solids 2017 2nd Semester