Professional Documents
Culture Documents
BONAFIDE CERTIFICATE
Completion of all the experiments conducted by the student of 14MEL51 – CAD Laboratory
during the year 2018 - 20 19 is certified for attending the model exam.
The bonafide record is submitted for the Model Examination held on _________________
Examiner-I Examiner-II
14MEL51CAD LABORATORY
0 0 3 1
Prerequisites: CAD/CAM/CIM and Machine Drawing.
LIST OF EXPERIMENTS:
1. Practice for Sketching with different sketching tools (Line, Polyline, Circle and Generalized
constraint methods)
2. Practice for Datum Plane, Axis, Point and Coordinate systems.
3. Practice for reading two dimensional (2D) drawings with conventional tolerances, conversion
of two dimensional drawings to three dimensional (3D) models.
4. 3D Part modeling options – protrusion and cut (extrude, revolve)
Exercises: Flange Coupling, Screw Jack.
5. 3D Part modeling options – protrusion and cut (sweep, blend, helical sweep)
Exercises: Machine Vice, Knuckle Joint.
6. Features creation with editing operations – Move, Pattern, Mirror, Round, Chamfer, Rib
Exercises: Simple Eccentric
7. Model Tree with family table and parametric concepts
Exercises: Types of Bolts and Nuts with different sizes.
8. Assembly – creating assembly from individual parts – Imposing assembly constraints.
9. Assembly mass properties and checking of interferences of components.
10. Conversion of 3D solid model to 2D drawing –different views, sections, isometric view and
dimensioning creations.
11. Surface modeling with advanced options (Trim, Merge, Projections, Toroidal and Spinal bend)
TOTAL: 45 Hours
REFERENCES / MANUALS/SOFTWARE:
Pro-E Wildfire 4.0, Solid works 2014 and CATIA V5R12.
Course Outcomes:
13. Modern tool usage:use the techniques, skills and modern engineering tools necessary for
engineering practice.
14. Domain Knowledge:work professionally in thermal, manufacturing and mechanical
systems areas including the design and realization of such systems with the use of
computational tools.
PO/CO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO13 PSO14
14MEL51.1 3 3 3 3 3 3 3
14MEL51.2 3 3 3 3 3 3 3
14MEL51.3 3 3 3 3 3 3 3
Marks Awarded
Page
S.No Date Content CoE Obs Rec Viva Sign
No Total
(20) (20) (20) (15) (75)
14 Tailstock Assembly
15 Reverse Modelling
TOTAL
Dimension
It is the measurement of one or more entities.
Constraint
Constraints are logical operations that are performed on the selected geometry to make it more
accurate in defining its position and size with respect to the other geometry.
Relation
A relation is an equation that relates two entities.
1.6 SKETCHER
A Sketcher is a 2D section of the feature being created. It is a basic 2D shape, and is created
on a planar reference. Almost all models designed in Pro / ENGINEER, consist of datums, sketched
feature, and placed features. For drawing datums and placed features, sketches are not required.
However, a sketch is needed to create any Sketched feature, such as Extrude or Revolve.
Basic steps in creating a sketch:
1. Sketch the required section in geometry.
2. Add constraints to the geometry.
3. Add dimensions to the geometry.
Mate:
The Mate placement constraint allows the user to make two selected planes, datum planes,
faces, or a combination of a datum plane and a face coplanar with respect to each other. The faces or
datums selected may or may not be in contact with each other.
Align:
The align constraint is used to assemble two components by making the selected faces or
planes coplanar such that the aligned faces or planes are facing in the same direction. Apart from
planes and faces, the user can also select datum axes, datum points, edges, or vertices for applying
the Align constraint.
Insert:
The insert constraint is used to assemble the revolved components. Applying this constraint
allows the revolved component, holes, or the combination of both to share the same orientation of
the central axis.
Coordinate Sys:
The coordinate system constraint aligns the coordinate system of the first component with
the coordinate system of the second component.
Tangent:
The tangent constraint is used to make the selected circular face tangent to the other selected
face or plane and at the same time make them coplanar.
Point on line:
The point on line constraint is used to align the selected datum point or the vertex on the first
part with the selected edges, datum axis, or datum curve on the second part.
Edge on surface:
The edge on surface constraint is used to align the selected edge of the first part with
selected surface or datum plane on the second part.
SKETCHING OF SIMPLECOMPONENTS
AIM:
To obtain the sketchesof the simple components as shown below by using Pro-E / Creo software.
COMMANDS USED:
PROCEDURE:
AIM:
To draw the part modeling of the given components as shown below by using Pro-E / Creosoftware
and obtain its respective views.
COMMANDS USED:
PROCEDURE:
AIM:
To draw the part modeling of the given components as shown below by using Pro-E / Creo software
and obtain its respective views.
COMMANDS USED:
PROCEDURE:
FLANGE COUPLING
AIM:
To draw the detailed view of the flange coupling parts by using the Pro-E / Creo software and
obtain their respective views.
COMMANDS USED:
PROCEDURE:
PART DRAWING:
Thus the part modeling of the Flange Coupling along withtheir respective views has been obtained.
AIM:
To draw the detailed view of the Screw Jack components by using the Pro-E / Creosoftware and
obtain their respective views.
COMMANDS USED:
PROCEDURE:
PART DRAWING:
Thus the part modeling of the Screw Jack components along with their respective views has been
obtained.
AIM:
To draw the detailed view of the Simple eccentric partsby using the Pro-E / Creo software and
obtain their respective views.
COMMANDS USED:
PROCEDURE:
PART DRAWING:
Thus the part modeling of the Simple eccentric components along with their respective views has
been obtained.
AIM:
To obtain the model tree with family table and parametric concepts by using Pro-E / Creosoftware.
COMMANDS USED:
PROCEDURE:
PART DRAWING:
Thus, the model tree with family table and parametric concepts has been obtained using Pro-E /
Creosoftware.
AIM:
To draw the detailed view of Machine Vicecomponent and assemble the parts by using the Pro-E /
Creosoftware and obtain its respective views.
COMMANDS USED:
PROCEDURE:
PART DRAWING:
Thus the detailedview and assembly of the Machine Vice along with its respective views have been
drawn.
AIM:
To draw the assembled view of Universal Couplingby using the Pro-E / Creo software and obtain
the mass properties.
COMMANDS USED:
PROCEDURE:
PART DRAWING:
Thus the assembled view of the Universal Couplingis obtained and the mass properties have been
calculated.
AIM:
To draw the detailed view of Plummer blockby using the Pro-E / Creosoftware and obtain the
respective views.
COMMANDS USED:
PROCEDURE:
PART DRAWING:
Thus the detailed view of the Plummer block is obtained and the respective views have been
obtained.
AIM:
To draw the detailed view of Stuffing Box by using the Pro-E / Creo software and obtain the
respective views.
COMMANDS USED:
PROCEDURE:
PART DRAWING:
Thus the detailed view of the Stuffing box is obtained and the respective views have been obtained.
AIM:
To draw the detailed view of Horizontal Cross Headby using the Pro-E / Creo software and obtain
the respective views.
COMMANDS USED:
PROCEDURE:
PART DRAWING:
Thus the detailed view of the Horizontal cross head is obtained and the respective views have been
obtained.
EX.NO: 13
Date: CRANE HOOK
AIM:
To draw the detailed view of Crane hook by using the Pro-E / Creo software and obtain the
respective views.
COMMANDS USED:
PROCEDURE:
PART DRAWING:
Thus the detailed view of the Crane hook is obtained and the respective views have been obtained.
AIM:
To draw the detailed view of Tailstockby using the Pro-E / Creo software and obtain the respective
views.
COMMANDS USED:
PROCEDURE:
PART DRAWING:
Thus the detailed view of the Tailstock is obtained and the respective views have been obtained.
AIM:
To measure the dimensions of the given component and model the same using any one CAD
modeling software.
COMMANDS USED:
PROCEDURE:
PART DRAWING:
RESULT:
Thus the dimensions of the given component are measured and the same is modelled using reverse
engineering concept.