Professional Documents
Culture Documents
C83600
C83600
Tradename: Ounce Metal
Designation:
Active? True
Inactive Date:
Chemical Composition
Element
Cu Pb Sn Zn Fe P(3) Ni(4) Al S Sb Si
(1,2)
Max (%) 86.0 6.0 6.0 6.0 0.30 0.05 1.0 0.005 0.08 0.25 0.005
(1) In determining Cu min., Cu may be calculated as Cu + Ni. (2) Cu + Sum of Named Elements 99.3% min. (3) For continuous castings P shall be 1.5% max. (4) Ni value includes Co.
Creep
Charpy V- Strength
Notch Compressive Compressive (0.1% per
Tensile Brinell Impact Strength .001 in. Strength .1 in. 10,000 Fatigue
Temper Strength YS-0.5% Ext Elongation Hardness, Izod Strength set/in. set/in. hours) Strength**
Form Temper Code (ksi) (ksi) (%) 500 kg load (ft-lbs) (ft-lbs) (ksi) (ksi) (ksi) (ksi)
As Centrifugal As Centrifugal
M02 30 Min 14 Min 20 Min
Cast Cast
As Continuous As Continuous
M07 36 Min 19 Min 15 Min
Cast Cast
* Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106.
Magnetic Permeability 1
Drossing Low
Fluidity Medium
Gassing Medium
Brazing Good Since brazing is performed at temperatures within the hot short range, strain must be avoided during brazing and cooling.
Machinability Rating 84
Casting
Solution Treatment 0
Trowels for Cement Working Friction & Wear Properties Wear Resistance
Bearing Segments for Steel Industry Friction & Wear Properties Wear Resistance
Pressure Blocks for Steel Industry Friction & Wear Properties Wear Resistance
Valve Bodies for the Water Meter Industry Corrosion Resistance Corrosion Resistance
Valve Bodies for the Water Meter Industry Friction & Wear Properties Wear Resistance
Valve Bodies for the Water Meter Industry Machining Properties Machinability, Good
Valve Bodies for the Water Meter Industry Mechanical Properties Moderate Strength
Valves for the Water Meter Industry Corrosion Resistance Corrosion Resistance
Valves for the Water Meter Industry Friction & Wear Properties Wear Resistance
Valves for the Water Meter Industry Machining Properties Machinability, Good
Valves for the Water Meter Industry Mechanical Properties Moderate Strength
As Continuous Cast Castings SAE J461 WROUGHT AND CAST COPPER ALLOYS
Castings AMS 4855 LEADED RED BRASS CASTINGS, SAND AND CENTRIFUGAL, AS CAST
Castings ASTM B584 COPPER ALLOY SAND CASTINGS FOR GENERAL APPLICATIONS
As Sand Cast
Castings ASTM B62 COMPOSITION BRONZE OR OUNCE METAL CASTINGS
ASME B16.26 CAST COPPER ALLOY FITTINGS FOR FLARED COPPER TUBES
Fitting
ASME B16.32 CAST COPPER ALLOY SOLDER-JOINT FITTINGS FOR SOLVENT DRAINAGE SYSTEMS
Ingot
ASTM B30 COPPER BASE ALLOYS IN INGOT FORM
No information available.