You are on page 1of 6

PRODUCT ADVANTAGES

1. SHAFT
The one -piece thru shaft ensures dependability
and positive disc position.
3
1 2 2. ACTUATOR FLANGE
The operator flange conforms to ISO 5211 onto
which manual, electric or pneumatic actuators
can be readily mounted.

3. BUSHING
The shaft is carried in four bushings with shaft
deflection due to high pressure being
prevented, thus ensuring optimal guidance,
positive location and long life.

4. LINER
Non-collapsible, stretch resistant, blow-out
proof and easily replaceable. The special
construction of the liner efficiently seals
4
against medium, the shaft location and the
connection pipework flanges. Gasket are not
required.

5 5. BODY
The value body is precision machined in order
that the liner with shaft location can be
accurately positioned to ensure minimal
operation wear and extended reliable service
6 life.

6. PRECISION PROFILE DISC


The precision machining of the disc provides
tight valve sealing and assures minimum
operating torque and longer liner life.

WAFER & LUG TYPE BUTTERFLY VALVE

R
ITEM PART NAME MATERIAL OPTIONAL

1 Body Cast Iron (GG 25) Ductile Iron (GGG 40), AISI 316, SS 304, WCB

2 Liner EPDM Buna-N, Hypalon, Viton, PTFE, Silicon

3 Disc AISI 316 Ductile Iron with Nickel Plated, AL Bronze, SS 304,
Ductile Iron With Nylon Coated

4 Shaft AISI 416 Stainless Steel

5 Bushing Teflon Luberized Bronze

6 O-Ring Buna-N No Option Available

7 Washer Steel -
8 Circlip Steel -
Other materials except above are available on request

8
7

2
3

WAFER & LUG TYPE BUTTERFLY VALVE

R
Model Of Valve Flange Drilled Body Material Disc Material Liner Material Mode Of Operation

BW-Wafer Type D - Din Standard 99 - Cast Iron (GG25) 1 - AISI 316 1 - EPDM L - Hand Lever
B - British Standard 98 - Ductile Iron 2 - Ductile Iron 2 - Buna-N G - Worm Gear
with Nickel
(GGG40) Plated
BL - Lug Type A - American Standard 97 - AISI 316 3 - AI. Bronze 3 - Hypalon M - Electric Actuator
J - Japanese Standard 96 - WCB 4 - WCB 4 - Viton P - Pneumatic Actuator
5 - SS 304 5 - PTFE
6 - Ductile Iron 6 - Silicon
With
Nylon Coated
Example Of Ordering : BW-D9911L
Illustration :

BW - D 99 1 1 L
Wafer
DIN Standard
Cast Iron
AISI 316
EPDM
Hand Lever

Description :
AFA Wafer Type Butterfly Valve
Flange Drilled : DIN PN 10/16
Body : Cast Iron (GG25)
Disc : AISI 316
Liner : EPDM
Operation : Hand Lever

WAFER & LUG TYPE BUTTERFLY VALVE

R
1 DISASSEMBLY
1. Remove the valve actuator
2 2. Remove the circlip 2
3. Pull out the washer 3
3 4. Pull out the shaft 1
5. Remove the disc 6
4
6. Extract the liner 7
7. Pull out the bushing 5 and O-Ring 4

ASSEMBLY
1. Remount the Bushing 5 and O-Ring 4
2. Press the Liner 7 into the body 8 and make
5 sure to align the liner hole and Shaft house
concentrically
7 3. Grease the surface slightly inside the Liner 7
with "Silicon Grease" and put the Disc 6 into
the Liner 7
4. Adjust and balance the Disc 6 to close position
6
5. Mount the washer 3 on the shaft 1
6. Insert the Shaft 1 on to body 8
7. Mount the circlip 2
8. Mount the actuator
8 9. Adjust the actuator on the close position
10. Open and close the valve
11. Sealing test

WAFER & LUG TYPE BUTTERFLY VALVE

You might also like