Connection Set-up is requested in cases of. Conversational call Originating streaming call Originating interactive call Originating background call. Illustrates the principle of how the radio connection between the UE and the RNC is established over the Uu interface and the access domain internal interface Iub.
Connection Set-up is requested in cases of. Conversational call Originating streaming call Originating interactive call Originating background call. Illustrates the principle of how the radio connection between the UE and the RNC is established over the Uu interface and the access domain internal interface Iub.
Connection Set-up is requested in cases of. Conversational call Originating streaming call Originating interactive call Originating background call. Illustrates the principle of how the radio connection between the UE and the RNC is established over the Uu interface and the access domain internal interface Iub.
requested What is rrccs is doing? What entities are involved? About the information Signalling Protocols Connection set-up is requested in cases of ... Originating conversational call Originating streaming call Originating interactive call Originating background call Terminating conversational call Terminating streaming call Terminating interactive call Terminating background call Emergency call High priority signalling Low priority signalling Call re-establishment What is RRC connection set-up is doing? Illustrates the principle of how the radio connection between the UE and the RNC is established over the Uu interface and the access domain internal interface Iub. To participate in the processing of the end-to-end connection set-up and release To manage and maintain the elemenet of the end-to-end connection, which is located in the radio access sub network Connection Establishment Connection Request (UE) Connection Set-up (RAN) Connection Set-up Complete (UE) RRC Connection Request Contains the UE identity (IMSI, TMSI,etc and establishment cause Establishment cause can be Conversational, Streaming, Interactive or background call Emergency call Registration Timer T300 is started, stopped after Setup message, else counter V300 is increased Transferred information Terminal and subscriber identity From UE to the network IMSI TMSI IMEI location area identity routing area identity
Must contain value of messages that contained
and inserted Reception of connection request message by the UTRAN Utran Transmits an RRC Connection Set-up message on the downlink CCCH or Transmits an RRC Connection Reject message on the downlink CCCH and on the UTRAN side the procedure ends, all the context information is deleted in UTRAN Reception of Connection Set-up message by the UE UE compares the IE values if the values are identical stops time T300 then transmits an connection set-up complete message on the uplink DCCH if the values are different the Ue ignores the rest of the message Initiation The non-access stratum in the UE may request the establishment of at most one RRC connection per UE The UE shall transmit an RRC Connection Request message on the uplink CCCH The UE shall set the IE „establishment cause“ according to indications from the non-access stratum or according to the paging cause received from the PAGING TYPE 1 message The UE shall set the IE „initial UE Identity“ The UE shall indicate ist capability in the IE „initial Ue capability“. Signalling flows Like fig 63 in 23060 Or page 30 (4sayfalik) Involved entities UE CCCH RACH IDLE FACH IMSI TMSI IMEI NBAP RNTI DCH RRC Connetion set-up establishes connection between terminal and radio access network contains activities and message flow uses (some) protocols to sort out information