You are on page 1of 1

32 Mostafa et al.

/ Jurnal Teknologi (Sciences & Engineering) 75: 11 (2015) 25–32

• Longitudinal and oblique fractures were the most Acknowledgement


tectonic fractures.
• The longitudinal fractures were parallel to minimum This work was conducted under an Australian
stress (Zagros trend). Research Council Linkage grant (LP0776644) in
• The transverse fractures were perpendicular to the conjunction with industry partner Oceanlinx Ltd.
Zagros trend (near major fault).
• Fracture intensity was the nearest to the major fault
and northern flank.
References
• Fracture porosity (0-7%).
• Fracture permeability (0-6000 md). [1] M. Alizadeh, Z. Movahed, R. Junin, W. R. Wan Sulaiman and
M. Z. Jaafare. 2015. Image Logs Application for Locating
Faults in Oiland Gas Reservoirs. Advanced Research in
4.0 CONCLUSION Applied Mechanics. 3: 1-8.
[2] Z. Movahed, R. Junin, Z. Safarkhanlou, M. Akbar. 2014.
Formation evaluation in Dezful embayment of Iran using oil-
In this work, the fracture modelling job was done in based-mud imaging techniques. J. Petrol. Sci. Eng. 121: 23-
one of the most important Iranian oil and gas fields, 37.
[3] Z. Movahed. 2007. Enhanced Reservoir Description in
Gachsaran field. The data used in this work were
Carbonate and Clastic Reservoirs, Paper presented at the
image loge data in cooperation with other geological SPE Asia Pacific oil & Gas Conference and Exhibition.
logs data, while the software used for this work was Jakarta, Indonesia, 30 October-1 November.
petrel software. It was found that the maximum dip [4] R. A. Nelson. 2001. Geologic Analysis of Naturally Fractured
inclination had been near major fault and the Reservoirs. 2th Ed., Houston; Texas, Gulf publishing
company.
minimum was in Lishter (10-80), whereas the thickness
[5] F. Khoshbakht, H. Memarian, M. Mohammadnia. 2009.
variation decreased towards the eastern part of the Comparison of Asmari, Pabdeh and Gurpi formation's
field, 9 faults had been distinguished in Gachsaran fractures, derived from image log. J. Petrol. Sci. Eng. 67: 65-
and Lishter, longitudinal and oblique fractures were 74.
the most tectonic fractures, the longitudinal fractures [6] Z. Movahed, R. Junin, P. Jeffreys. 2014. Evaluate the
borehole condition to reduce drilling risk and avoid
were parallel to minimum stress (Zagros trend), the
potential well bore damages by using image logs. J. Petrol.
transverse fractures were perpendicular to zagros Sci. Eng. 122: 318-330.
trend (near major fault), the fracture intensity was the [7] M. Alizadeh, Z. Movahed, R. Junin, W. R. Wan Sulaiman and
nearest to the major fault and northern flank, the M. Z. Jaafare. 2014. Fault Interpretation Using Image Logs.
fracture porosity was (0-7%), and the fracture Applied Mechanics and Materials 695: 840-843.
permeability was (0-6000 md).

View publication stats

You might also like