Professional Documents
Culture Documents
Choose the letter of the best answer. Use separate paper for your answer.
1. This is usually bare solid or stranded conductor used for overhead transmission lines and ground wires.
a. Copper or aluminum conductor d. Copper or aluminum PE insulated line
b. Non-metallic sheathed cable (type NM) wire
c. Thermoplastic covered fixture wire 4
2. This is a flame retardant, moisture resistant wire used for building wiring installation in dry or wet locations.
a. Thermoplastic Portable cords c. Control cable (braided type)
b. Thermoplastic wire (type TW) d. Flat Cord (type SPT)
3. A wire commonly used for wiring motorized engines and appliances with high temperature, and for switch board
wiring.
a. Temperature wire (type HI) d. d. Steel tape armored power cable with
b. Control cable (braided type) ground wire
c. Asbestos covered nickel cord
4. This is a multi-conductor cable generally used forinterior wiring installations in dry and wet locations.
a. Power cable c. Royal cable
b. Nonmetallic sheathed cable (type NMC) d. Submersible pump cable
5. It is a type of flexible armored cable that has rubber insulation and a lead sheath between the conductor and the
armor.
a. type AC b. type ACT c. type ACV d. type ACL
6. The appropriate tool used in cutting flexible armored cable.
a. Pliers b. Backsaw c. Hacksaw d. Knife
7. What do you call a plastic or metal material that is used for mounting of convenient outlets and switches on
walls?
a. Junctio b. Frames c. Utility d. Fitting
n Box Box
8. It is used for branching conductors and enclosing splices.
a. Utility Box b. Fastening c. Junction Box
Device d. Adhesive
9. What is the safety device which automatically cuts off current that exceeds the circuit rating?
a) Circuit b) Circuit Breaker c) Conduit d) alvanic Reaction
10. A wire used for wiring electric ranges, hot water heaters, stoves and hairdryers where both heat and moisture
resistance is desirable.
a. Duralene (type WP) d. Steel tape armored power cable with ground
b. Coaxial cable wire (Copper)
c. Asbestos covered nickel cord (Rockbestos)
11. A wire commonly used for wiring motorized engines and appliances with high temperature, and for switch board
wiring.
a. Temperature wire (type HI) c. Asbestos covered nickel cord
b. Thermoplastic wire (type TW) d. Coaxial cable
12. This is a multi-conductor cable generally used for interior wiring installations in dry and wet locations.
a. Durex wire d. Steel tape armored power cable with ground
b. Nonmetallic sheathed cable (type NMC) wire (Copper)
c. Asbestos covered nickel cord (Rockbestos)
13. This wire or cable is used for radio frequency antenna installation, and radar transceiver installation.
a. Control cable c. Duralene (type WP)
b. Royal cord d. d. Coaxial cable
14. This wire or cable has 2, 3 or 4 conductors, stranded, and used for portable cords in electrical equipment.
a. Control b. Royal c. Interco d. Coaxial
cable cord m cable cable
15. This is polyethylene-insulated line wire used for wiring installation of residential buildings.
a. Intercom b. Royal cord c. Duralene d. Flat cord
cable (type WP) (type SPT)
16. This wire cannot be used in wet locations.
a. TW b. THW c. THHN d. THWN
17. A type of flexible armored cable that has varnish cambric insulation.
a. type AC b. type ACT c. type ACL d. type ACV
DESCRIPTION SYMBOL
31. S4W
32. S
33. S3
34. S3P
35. S3W
INCANDECENT LIGHT (WALL) 36.
GROUND 39.
IV-Complete the drawing, control the lights using the corresponding switch, you can add wires if you need to.